Receiving Helpdesk

how do i pair my lucci fan remote

by Freda Medhurst Published 3 years ago Updated 3 years ago

You can pair the fan with remote using the following steps:

  • Disconnect the power from the fan.
  • Turn the power on after two minutes.
  • Within those two minutes, press and hold the light button and fan button on the remote simultaneously for five seconds.
  • You should see lights flashing.

Transmitter / Receiver pairing for Ceiling fan 1:
Press and hold the “ ” button of transmitter 1 for 3-5 seconds within 60 seconds of switching the power ON to the receiver of ceiling fan 1. The fan will move slightly and stop to indicate the paring process is activated.

Full Answer

How do I use the Lucci connect wi-fi fan remote?

Lucci Connect Wi-Fi fan remote control to enable to use you fan as a ''Smart Fan'' Using the Lucci Connect app, this Smart Fan Remote will allow you to control your fan remotely from almost anywhere. Turn your fan on/off and change the speed via the remote, from your phone or even voice control from a smart home hub.

How do I pair the fan with the remote?

You can pair the fan with remote using the following steps: 1 Disconnect the power from the fan. 2 Turn the power on after two minutes. 3 Within those two minutes, press and hold the light button and fan button on the remote simultaneously for five seconds. 4 You should see lights flashing.

How do I reset the light remote on my fan?

Disconnect the power from the fan. Turn the power on after two minutes. Within those two minutes, press and hold the light button and fan button on the remote simultaneously for five seconds.

How do you fix a fan that won't turn on?

Turn the fan power off and back on at the wall switch (or circuit breaker if necessary). Within three minutes of restoring power to the fan, press and hold both the Fan button and the Light button on the handheld remote for at least four seconds.

How do I resync my ceiling fan remote?

There are several ways to reset a ceiling fan remote, but here's the most straightforward: With the power off, hold down the button until the light on the remote flashes. Then, press and hold it again for 15-30 seconds to resynchronize the remote with your fan.

How do I use Lucci remote?

LED Indicator: The red LED indicator on the top of transmitter will flash when the buttons are active.HI: Press the button to set fan running speed to high.MED: Press the button to set fan running speed to medium.LOW: Press the button to set fan running speed to low.OFF: Press the button to turn OFF the fan.More items...•

How do I connect my fan to my fan remote?

3:037:44How To Install a Ceiling Fan With Remote Control - YouTubeYouTubeStart of suggested clipEnd of suggested clipWe're going to connect our neutral to the white on this remote control power in and we're going toMoreWe're going to connect our neutral to the white on this remote control power in and we're going to connect the black to the black from the power into the remote.

Why is my ceiling fan not responding to remote?

Perhaps the most common cause for a ceiling fan remotes not working is either a lack of batteries or dead batteries. If your remote control has an indicator light, check to see if it comes on. If it doesn't, that's a good sign that it has a battery problem.

Why does my ceiling fan keep turning on?

The main reasons behind a ceiling fan light turning ON by itself could be faulty wiring or due to similar signals received from another remote control nearby. A ceiling fan light may turn ON by itself when there is a defect in its wiring circuit.

How do you clean a Lucci fan?

CARE AND CLEANING: To clean the fan blade, wipe with only a damp clean cloth with NO organic solvents or cleaners. The motor has a permanently lubricated ball bearing so there is no need to oil. NOTE: Always turn OFF the power and unplug from the mains socket outlet before attempting to clean your fan.

Is there a universal remote for ceiling fans?

There are many “universal” ceiling fan remote control kits on the market for overhead fans controlled by pull chains and a singe wall switch. All of them feature on/off and fan speed control. Others also offer light-dimming and thermostatic control capabilities.

How do I turn my fan on without a remote?

Stand a ladder next to the ceiling fan. ... Purchase a chain link cord that is the length of the final number written down.Insert the other end of the chain link cord inside the metal pull cord knob. ... Pull the knob to engage the motor of the ceiling fan.

Is there an app to control my ceiling fan?

Aubric smart ceiling fan remote control kit enables you to control your ceiling fan and light via RF remote control, smartphone app, and even voice control with Amazon Alexa or Google Assistant. It's time to enjoy smart life with home automation.

A B C D E F G H I J K L M N O P Q R S T U V W X Y Z 1 2 3 4 5 6 7 8 9
8.3.21PHP Version1.93sRequest Duration2MBMemory UsageGET {post}Route
  • warninglog[11:38:48] LOG.warning: Creation of dynamic property Barryvdh\Debugbar\DataFormatter\QueryFormatter:...
  • warninglog[11:38:48] LOG.warning: Creation of dynamic property Barryvdh\Debugbar\DataFormatter\QueryFormatter:...
  • warninglog[11:38:48] LOG.warning: Callables of the form ["Swift_SmtpTransport", "Swift_Transport_EsmtpTranspor...
  • warninglog[11:38:48] LOG.warning: Creation of dynamic property Barryvdh\Debugbar\DataFormatter\SimpleFormatter...
  • warninglog[11:38:48] LOG.warning: Creation of dynamic property Barryvdh\Debugbar\DataFormatter\SimpleFormatter...
  • warninglog[11:38:48] LOG.warning: json_decode(): Passing null to parameter #1 ($json) of type string is deprec...
  • warninglog[11:38:48] LOG.warning: json_decode(): Passing null to parameter #1 ($json) of type string is deprec...
  • warninglog[11:38:48] LOG.warning: json_decode(): Passing null to parameter #1 ($json) of type string is deprec...
  • warninglog[11:38:48] LOG.warning: json_decode(): Passing null to parameter #1 ($json) of type string is deprec...
  • warninglog[11:38:48] LOG.warning: json_decode(): Passing null to parameter #1 ($json) of type string is deprec...
  • warninglog[11:38:48] LOG.warning: json_decode(): Passing null to parameter #1 ($json) of type string is deprec...
  • warninglog[11:38:48] LOG.warning: json_decode(): Passing null to parameter #1 ($json) of type string is deprec...
  • warninglog[11:38:48] LOG.warning: explode(): Passing null to parameter #2 ($string) of type string is deprecat...
  • Booting (12.32ms)
  • Application (1.92s)
  • 1 x Application (99.34%)
    1.92s
    1 x Booting (0.64%)
    12.32ms
    7 templates were rendered
    • themes.DevBlog.content.post (resources/views/themes/DevBlog/content/post.blade.php)34blade
      Params
      0
      post
      1
      postContent
      2
      author
      3
      updated_at
      4
      bing_rich_snippet_text
      5
      bing_rich_snippet_link
      6
      bing_related_keywords
      7
      google_related_keywords
      8
      bing_news_title
      9
      bing_news_description
      10
      bing_videos
      11
      bing_images
      12
      bing_search_result_title
      13
      bing_search_result_description
      14
      bing_search_result_url
      15
      bing_paa_questions
      16
      bing_paa_answers
      17
      bing_slider_faq_questions
      18
      bing_slider_faq_answers
      19
      bing_pop_faq_questions
      20
      bing_pop_faq_answers
      21
      bing_tab_faq_questions
      22
      bing_tab_faq_answers
      23
      google_faq_questions
      24
      google_faq_answers
      25
      google_rich_snippet
      26
      google_search_result
      27
      indexedArray
      28
      total_images
      29
      total_videos
      30
      settings
      31
      url_current
      32
      menus
      33
      sidebar
    • themes.DevBlog.layouts.master (resources/views/themes/DevBlog/layouts/master.blade.php)41blade
      Params
      0
      __env
      1
      app
      2
      errors
      3
      post
      4
      postContent
      5
      author
      6
      updated_at
      7
      bing_rich_snippet_text
      8
      bing_rich_snippet_link
      9
      bing_related_keywords
      10
      google_related_keywords
      11
      bing_news_title
      12
      bing_news_description
      13
      bing_videos
      14
      bing_images
      15
      bing_search_result_title
      16
      bing_search_result_description
      17
      bing_search_result_url
      18
      bing_paa_questions
      19
      bing_paa_answers
      20
      bing_slider_faq_questions
      21
      bing_slider_faq_answers
      22
      bing_pop_faq_questions
      23
      bing_pop_faq_answers
      24
      bing_tab_faq_questions
      25
      bing_tab_faq_answers
      26
      google_faq_questions
      27
      google_faq_answers
      28
      google_rich_snippet
      29
      google_search_result
      30
      indexedArray
      31
      total_images
      32
      total_videos
      33
      settings
      34
      url_current
      35
      menus
      36
      sidebar
      37
      i
      38
      __currentLoopData
      39
      loop
      40
      item
    • themes.DevBlog.panels.head (resources/views/themes/DevBlog/panels/head.blade.php)41blade
      Params
      0
      __env
      1
      app
      2
      errors
      3
      post
      4
      postContent
      5
      author
      6
      updated_at
      7
      bing_rich_snippet_text
      8
      bing_rich_snippet_link
      9
      bing_related_keywords
      10
      google_related_keywords
      11
      bing_news_title
      12
      bing_news_description
      13
      bing_videos
      14
      bing_images
      15
      bing_search_result_title
      16
      bing_search_result_description
      17
      bing_search_result_url
      18
      bing_paa_questions
      19
      bing_paa_answers
      20
      bing_slider_faq_questions
      21
      bing_slider_faq_answers
      22
      bing_pop_faq_questions
      23
      bing_pop_faq_answers
      24
      bing_tab_faq_questions
      25
      bing_tab_faq_answers
      26
      google_faq_questions
      27
      google_faq_answers
      28
      google_rich_snippet
      29
      google_search_result
      30
      indexedArray
      31
      total_images
      32
      total_videos
      33
      settings
      34
      url_current
      35
      menus
      36
      sidebar
      37
      i
      38
      __currentLoopData
      39
      loop
      40
      item
    • themes.DevBlog.panels.header (resources/views/themes/DevBlog/panels/header.blade.php)41blade
      Params
      0
      __env
      1
      app
      2
      errors
      3
      post
      4
      postContent
      5
      author
      6
      updated_at
      7
      bing_rich_snippet_text
      8
      bing_rich_snippet_link
      9
      bing_related_keywords
      10
      google_related_keywords
      11
      bing_news_title
      12
      bing_news_description
      13
      bing_videos
      14
      bing_images
      15
      bing_search_result_title
      16
      bing_search_result_description
      17
      bing_search_result_url
      18
      bing_paa_questions
      19
      bing_paa_answers
      20
      bing_slider_faq_questions
      21
      bing_slider_faq_answers
      22
      bing_pop_faq_questions
      23
      bing_pop_faq_answers
      24
      bing_tab_faq_questions
      25
      bing_tab_faq_answers
      26
      google_faq_questions
      27
      google_faq_answers
      28
      google_rich_snippet
      29
      google_search_result
      30
      indexedArray
      31
      total_images
      32
      total_videos
      33
      settings
      34
      url_current
      35
      menus
      36
      sidebar
      37
      i
      38
      __currentLoopData
      39
      loop
      40
      item
    • themes.DevBlog.panels.navbar (resources/views/themes/DevBlog/panels/navbar.blade.php)41blade
      Params
      0
      __env
      1
      app
      2
      errors
      3
      post
      4
      postContent
      5
      author
      6
      updated_at
      7
      bing_rich_snippet_text
      8
      bing_rich_snippet_link
      9
      bing_related_keywords
      10
      google_related_keywords
      11
      bing_news_title
      12
      bing_news_description
      13
      bing_videos
      14
      bing_images
      15
      bing_search_result_title
      16
      bing_search_result_description
      17
      bing_search_result_url
      18
      bing_paa_questions
      19
      bing_paa_answers
      20
      bing_slider_faq_questions
      21
      bing_slider_faq_answers
      22
      bing_pop_faq_questions
      23
      bing_pop_faq_answers
      24
      bing_tab_faq_questions
      25
      bing_tab_faq_answers
      26
      google_faq_questions
      27
      google_faq_answers
      28
      google_rich_snippet
      29
      google_search_result
      30
      indexedArray
      31
      total_images
      32
      total_videos
      33
      settings
      34
      url_current
      35
      menus
      36
      sidebar
      37
      i
      38
      __currentLoopData
      39
      loop
      40
      item
    • themes.DevBlog.panels.footer (resources/views/themes/DevBlog/panels/footer.blade.php)41blade
      Params
      0
      __env
      1
      app
      2
      errors
      3
      post
      4
      postContent
      5
      author
      6
      updated_at
      7
      bing_rich_snippet_text
      8
      bing_rich_snippet_link
      9
      bing_related_keywords
      10
      google_related_keywords
      11
      bing_news_title
      12
      bing_news_description
      13
      bing_videos
      14
      bing_images
      15
      bing_search_result_title
      16
      bing_search_result_description
      17
      bing_search_result_url
      18
      bing_paa_questions
      19
      bing_paa_answers
      20
      bing_slider_faq_questions
      21
      bing_slider_faq_answers
      22
      bing_pop_faq_questions
      23
      bing_pop_faq_answers
      24
      bing_tab_faq_questions
      25
      bing_tab_faq_answers
      26
      google_faq_questions
      27
      google_faq_answers
      28
      google_rich_snippet
      29
      google_search_result
      30
      indexedArray
      31
      total_images
      32
      total_videos
      33
      settings
      34
      url_current
      35
      menus
      36
      sidebar
      37
      i
      38
      __currentLoopData
      39
      loop
      40
      item
    • themes.DevBlog.panels.scripts (resources/views/themes/DevBlog/panels/scripts.blade.php)41blade
      Params
      0
      __env
      1
      app
      2
      errors
      3
      post
      4
      postContent
      5
      author
      6
      updated_at
      7
      bing_rich_snippet_text
      8
      bing_rich_snippet_link
      9
      bing_related_keywords
      10
      google_related_keywords
      11
      bing_news_title
      12
      bing_news_description
      13
      bing_videos
      14
      bing_images
      15
      bing_search_result_title
      16
      bing_search_result_description
      17
      bing_search_result_url
      18
      bing_paa_questions
      19
      bing_paa_answers
      20
      bing_slider_faq_questions
      21
      bing_slider_faq_answers
      22
      bing_pop_faq_questions
      23
      bing_pop_faq_answers
      24
      bing_tab_faq_questions
      25
      bing_tab_faq_answers
      26
      google_faq_questions
      27
      google_faq_answers
      28
      google_rich_snippet
      29
      google_search_result
      30
      indexedArray
      31
      total_images
      32
      total_videos
      33
      settings
      34
      url_current
      35
      menus
      36
      sidebar
      37
      i
      38
      __currentLoopData
      39
      loop
      40
      item
    uri
    GET {post}
    middleware
    web, checkdate
    as
    post.show
    controller
    App\Http\Controllers\Frontend\json_data\PostController@show
    namespace
    where
    file
    app/Http/Controllers/Frontend/json_data/PostController.php:18-166
    7 statements were executed1.9s
    • select * from `posts` where `published_at` <= '2025-07-03 11:38:48' and `slug` = 'how-do-i-pair-my-lucci-fan-remote' and `posts`.`deleted_at` is null limit 1
      2.76ms/app/Providers/RouteServiceProvider.php:54receivinghelpdeskask
      Metadata
      Bindings
      • 0. 2025-07-03 11:38:48
      • 1. how-do-i-pair-my-lucci-fan-remote
      Backtrace
      • 15. /app/Providers/RouteServiceProvider.php:54
      • 18. /vendor/laravel/framework/src/Illuminate/Routing/Router.php:842
      • 19. Route binding:39
      • 20. /vendor/laravel/framework/src/Illuminate/Pipeline/Pipeline.php:167
      • 21. /vendor/laravel/framework/src/Illuminate/Foundation/Http/Middleware/VerifyCsrfToken.php:78
    • select * from `json_post_contents` where `json_post_contents`.`post_id` = 172963 and `json_post_contents`.`post_id` is not null and `rewrite_id` = 0
      4.5msmiddleware::checkdate:30receivinghelpdeskask
      Metadata
      Bindings
      • 0. 172963
      • 1. 0
      Backtrace
      • 19. middleware::checkdate:30
      • 20. /vendor/laravel/framework/src/Illuminate/Pipeline/Pipeline.php:167
      • 21. /vendor/laravel/jetstream/src/Http/Middleware/ShareInertiaData.php:61
      • 22. /vendor/laravel/framework/src/Illuminate/Pipeline/Pipeline.php:167
      • 23. /vendor/laravel/framework/src/Illuminate/Routing/Middleware/SubstituteBindings.php:50
    • select * from `nova_menu_menus` where `slug` = 'header' limit 1
      480μs/vendor/outl1ne/nova-menu-builder/src/helpers.php:32receivinghelpdeskask
      Metadata
      Bindings
      • 0. header
      Backtrace
      • 15. /vendor/outl1ne/nova-menu-builder/src/helpers.php:32
      • 17. /vendor/laravel/framework/src/Illuminate/Routing/Controller.php:54
      • 18. /vendor/laravel/framework/src/Illuminate/Routing/ControllerDispatcher.php:45
      • 19. /vendor/laravel/framework/src/Illuminate/Routing/Route.php:261
      • 20. /vendor/laravel/framework/src/Illuminate/Routing/Route.php:205
    • select * from `nova_menu_menu_items` where `nova_menu_menu_items`.`menu_id` = 1 and `nova_menu_menu_items`.`menu_id` is not null and `parent_id` is null order by `parent_id` asc, `order` asc, `name` asc
      280μs/vendor/outl1ne/nova-menu-builder/src/Models/Menu.php:35receivinghelpdeskask
      Metadata
      Bindings
      • 0. 1
      Backtrace
      • 19. /vendor/outl1ne/nova-menu-builder/src/Models/Menu.php:35
      • 20. /vendor/outl1ne/nova-menu-builder/src/helpers.php:33
      • 22. /vendor/laravel/framework/src/Illuminate/Routing/Controller.php:54
      • 23. /vendor/laravel/framework/src/Illuminate/Routing/ControllerDispatcher.php:45
      • 24. /vendor/laravel/framework/src/Illuminate/Routing/Route.php:261
    • select * from `nova_menu_menu_items` where `nova_menu_menu_items`.`parent_id` in (1) order by `order` asc
      230μs/vendor/outl1ne/nova-menu-builder/src/Models/Menu.php:35receivinghelpdeskask
      Metadata
      Backtrace
      • 24. /vendor/outl1ne/nova-menu-builder/src/Models/Menu.php:35
      • 25. /vendor/outl1ne/nova-menu-builder/src/helpers.php:33
      • 27. /vendor/laravel/framework/src/Illuminate/Routing/Controller.php:54
      • 28. /vendor/laravel/framework/src/Illuminate/Routing/ControllerDispatcher.php:45
      • 29. /vendor/laravel/framework/src/Illuminate/Routing/Route.php:261
    • select `id`, `post_title`, `slug` from `posts` where `status` = 'publish' and `posts`.`deleted_at` is null order by RAND() limit 10
      1.89s/app/View/Composers/SidebarView.php:22receivinghelpdeskask
      Metadata
      Bindings
      • 0. publish
      Backtrace
      • 14. /app/View/Composers/SidebarView.php:22
      • 15. /app/View/Composers/SidebarView.php:12
      • 16. /vendor/laravel/framework/src/Illuminate/View/Concerns/ManagesEvents.php:124
      • 17. /vendor/laravel/framework/src/Illuminate/View/Concerns/ManagesEvents.php:162
      • 20. /vendor/laravel/framework/src/Illuminate/View/Concerns/ManagesEvents.php:177
    • select * from `fake_users` where `fake_users`.`id` = 17597 limit 1
      600μsview::2dd102cf0462e89a4d4d8bc77355d767652bf9aa:15receivinghelpdeskask
      Metadata
      Bindings
      • 0. 17597
      Backtrace
      • 21. view::2dd102cf0462e89a4d4d8bc77355d767652bf9aa:15
      • 23. /vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:108
      • 24. /vendor/laravel/framework/src/Illuminate/View/Engines/PhpEngine.php:58
      • 25. /vendor/livewire/livewire/src/ComponentConcerns/RendersLivewireComponents.php:69
      • 26. /vendor/laravel/framework/src/Illuminate/View/Engines/CompilerEngine.php:61
    App\Models\FakeUser
    1
    Outl1ne\MenuBuilder\Models\MenuItem
    1
    Outl1ne\MenuBuilder\Models\Menu
    1
    App\Models\JsonPostContent
    1
    App\Models\Post
    11
        _token
        lmL4LN5HkEHW6wiJdVpkzOTk65T4XBndGKYuufvO
        _previous
        array:1 [ "url" => "https://receivinghelpdesk.com/ask/how-do-i-pair-my-lucci-fan-remote" ]
        _flash
        array:2 [ "old" => [] "new" => [] ]
        PHPDEBUGBAR_STACK_DATA
        []
        path_info
        /how-do-i-pair-my-lucci-fan-remote
        status_code
        200
        
        status_text
        OK
        format
        html
        content_type
        text/html; charset=UTF-8
        request_query
        []
        
        request_request
        []
        
        request_headers
        0 of 0
        array:25 [ "cookie" => array:1 [ 0 => "XSRF-TOKEN=eyJpdiI6IjRjUmE0SGE3REdNTUtjSUxEcTRtbVE9PSIsInZhbHVlIjoiQUtFbjdKSzUrdFRKdGtKOWI2cEFxajNxbkF4QnRQZlp0SXdFUUZhVGZ6Q3RwT1FybnhhVXhaWjgrSE9oNHE5VkE3L3BkREtqMThpaVVzVUNFcjI3RlkwYmRwdDg4TmcwalRDSnNEblluTVdYUURuZGpta3Vta0JlSVJHQ3hocjQiLCJtYWMiOiIyNDg1MGNkNzQ1ZTAyYjhhNjU2NDhhZTlmMmE3YmZmYzJkOWI0OWFjMDA4MGI5MmUwNDg0NThhYTcxMmMxZGRmIiwidGFnIjoiIn0%3D; askhelpdesk_session=eyJpdiI6ImxINjZiZWtHV0hnek9tdjVvdmpxNUE9PSIsInZhbHVlIjoiejBWRTFQaGdnc2Z1KzU1UXJYSVRGand0R1NPNC9nWGprWEZpVFg0emFCUE9Yd2hsZmNuTnlMQnNGNHlwWE9ud2xrUzFqeFl3MXBNK1IzSFk3OEtmdnpBMzVNTW5RaTlSRHYwN1UwNzlSV3lGZmVJRDF6K1ZLdDdJcWkvS3cyNjMiLCJtYWMiOiI1NGJmZGZkNTBiM2E0N2EyZTgxZWRiMjQ5NGMxMmQ4NmI4YzczZjhkMmE1NzcxMDcwNTkwODE1NjVmNWRhOGEzIiwidGFnIjoiIn0%3D; _pk_id.64.7c30=c45855a4266e9f57.1751522927.; _pk_ses.64.7c30=1XSRF-TOKEN=eyJpdiI6IjRjUmE0SGE3REdNTUtjSUxEcTRtbVE9PSIsInZhbHVlIjoiQUtFbjdKSzUrdFRKdGtKOWI2cEFxajNxbkF4QnRQZlp0SXdFUUZhVGZ6Q3RwT1FybnhhVXhaWjgrSE9oNHE5VkE3L3BkR" ] "cf-ipcountry" => array:1 [ 0 => "US" ] "cf-connecting-ip" => array:1 [ 0 => "216.73.216.241" ] "cdn-loop" => array:1 [ 0 => "cloudflare; loops=1" ] "sec-fetch-mode" => array:1 [ 0 => "navigate" ] "sec-fetch-site" => array:1 [ 0 => "none" ] "accept" => array:1 [ 0 => "text/html,application/xhtml+xml,application/xml;q=0.9,image/avif,image/webp,image/apng,*/*;q=0.8,application/signed-exchange;v=b3;q=0.7" ] "user-agent" => array:1 [ 0 => "Mozilla/5.0 AppleWebKit/537.36 (KHTML, like Gecko; compatible; ClaudeBot/1.0; +claudebot@anthropic.com)" ] "upgrade-insecure-requests" => array:1 [ 0 => "1" ] "sec-ch-ua-platform" => array:1 [ 0 => ""Windows"" ] "sec-ch-ua-mobile" => array:1 [ 0 => "?0" ] "sec-ch-ua" => array:1 [ 0 => ""Chromium";v="130", "HeadlessChrome";v="130", "Not?A_Brand";v="99"" ] "cache-control" => array:1 [ 0 => "no-cache" ] "pragma" => array:1 [ 0 => "no-cache" ] "accept-encoding" => array:1 [ 0 => "gzip, br" ] "cf-ray" => array:1 [ 0 => "959435de0a60a434-ORD" ] "priority" => array:1 [ 0 => "u=0, i" ] "sec-fetch-dest" => array:1 [ 0 => "document" ] "sec-fetch-user" => array:1 [ 0 => "?1" ] "cf-visitor" => array:1 [ 0 => "{"scheme":"https"}" ] "connection" => array:1 [ 0 => "close" ] "x-forwarded-proto" => array:1 [ 0 => "https" ] "x-forwarded-for" => array:1 [ 0 => "216.73.216.241, 172.70.178.12" ] "x-server-addr" => array:1 [ 0 => "154.12.239.204" ] "host" => array:1 [ 0 => "receivinghelpdesk.com" ] ]
        request_server
        0 of 0
        array:56 [ "USER" => "runcloud" "HOME" => "/home/runcloud" "SCRIPT_NAME" => "/ask/index.php" "REQUEST_URI" => "/ask/how-do-i-pair-my-lucci-fan-remote" "QUERY_STRING" => "" "REQUEST_METHOD" => "GET" "SERVER_PROTOCOL" => "HTTP/1.0" "GATEWAY_INTERFACE" => "CGI/1.1" "REDIRECT_URL" => "/ask/how-do-i-pair-my-lucci-fan-remote" "REMOTE_PORT" => "32890" "SCRIPT_FILENAME" => "/home/runcloud/webapps/ReceivingHelpDesk/ask/index.php" "SERVER_ADMIN" => "you@example.com" "CONTEXT_DOCUMENT_ROOT" => "/home/runcloud/webapps/ReceivingHelpDesk/" "CONTEXT_PREFIX" => "" "REQUEST_SCHEME" => "http" "DOCUMENT_ROOT" => "/home/runcloud/webapps/ReceivingHelpDesk/" "REMOTE_ADDR" => "172.70.178.12" "SERVER_PORT" => "80" "SERVER_ADDR" => "127.0.0.1" "SERVER_NAME" => "receivinghelpdesk.com" "SERVER_SOFTWARE" => "Apache/2.4.63 (Unix) OpenSSL/1.1.1f" "SERVER_SIGNATURE" => "" "LD_LIBRARY_PATH" => "/RunCloud/Packages/apache2-rc/lib" "PATH" => "/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin" "HTTP_COOKIE" => "XSRF-TOKEN=eyJpdiI6IjRjUmE0SGE3REdNTUtjSUxEcTRtbVE9PSIsInZhbHVlIjoiQUtFbjdKSzUrdFRKdGtKOWI2cEFxajNxbkF4QnRQZlp0SXdFUUZhVGZ6Q3RwT1FybnhhVXhaWjgrSE9oNHE5VkE3L3BkREtqMThpaVVzVUNFcjI3RlkwYmRwdDg4TmcwalRDSnNEblluTVdYUURuZGpta3Vta0JlSVJHQ3hocjQiLCJtYWMiOiIyNDg1MGNkNzQ1ZTAyYjhhNjU2NDhhZTlmMmE3YmZmYzJkOWI0OWFjMDA4MGI5MmUwNDg0NThhYTcxMmMxZGRmIiwidGFnIjoiIn0%3D; askhelpdesk_session=eyJpdiI6ImxINjZiZWtHV0hnek9tdjVvdmpxNUE9PSIsInZhbHVlIjoiejBWRTFQaGdnc2Z1KzU1UXJYSVRGand0R1NPNC9nWGprWEZpVFg0emFCUE9Yd2hsZmNuTnlMQnNGNHlwWE9ud2xrUzFqeFl3MXBNK1IzSFk3OEtmdnpBMzVNTW5RaTlSRHYwN1UwNzlSV3lGZmVJRDF6K1ZLdDdJcWkvS3cyNjMiLCJtYWMiOiI1NGJmZGZkNTBiM2E0N2EyZTgxZWRiMjQ5NGMxMmQ4NmI4YzczZjhkMmE1NzcxMDcwNTkwODE1NjVmNWRhOGEzIiwidGFnIjoiIn0%3D; _pk_id.64.7c30=c45855a4266e9f57.1751522927.; _pk_ses.64.7c30=1XSRF-TOKEN=eyJpdiI6IjRjUmE0SGE3REdNTUtjSUxEcTRtbVE9PSIsInZhbHVlIjoiQUtFbjdKSzUrdFRKdGtKOWI2cEFxajNxbkF4QnRQZlp0SXdFUUZhVGZ6Q3RwT1FybnhhVXhaWjgrSE9oNHE5VkE3L3BkR" "HTTP_CF_IPCOUNTRY" => "US" "HTTP_CF_CONNECTING_IP" => "216.73.216.241" "HTTP_CDN_LOOP" => "cloudflare; loops=1" "HTTP_SEC_FETCH_MODE" => "navigate" "HTTP_SEC_FETCH_SITE" => "none" "HTTP_ACCEPT" => "text/html,application/xhtml+xml,application/xml;q=0.9,image/avif,image/webp,image/apng,*/*;q=0.8,application/signed-exchange;v=b3;q=0.7" "HTTP_USER_AGENT" => "Mozilla/5.0 AppleWebKit/537.36 (KHTML, like Gecko; compatible; ClaudeBot/1.0; +claudebot@anthropic.com)" "HTTP_UPGRADE_INSECURE_REQUESTS" => "1" "HTTP_SEC_CH_UA_PLATFORM" => ""Windows"" "HTTP_SEC_CH_UA_MOBILE" => "?0" "HTTP_SEC_CH_UA" => ""Chromium";v="130", "HeadlessChrome";v="130", "Not?A_Brand";v="99"" "HTTP_CACHE_CONTROL" => "no-cache" "HTTP_PRAGMA" => "no-cache" "HTTP_ACCEPT_ENCODING" => "gzip, br" "HTTP_CF_RAY" => "959435de0a60a434-ORD" "HTTP_PRIORITY" => "u=0, i" "HTTP_SEC_FETCH_DEST" => "document" "HTTP_SEC_FETCH_USER" => "?1" "HTTP_CF_VISITOR" => "{"scheme":"https"}" "HTTP_CONNECTION" => "close" "HTTP_X_FORWARDED_PROTO" => "https" "HTTP_X_FORWARDED_FOR" => "216.73.216.241, 172.70.178.12" "HTTP_X_SERVER_ADDR" => "154.12.239.204" "HTTP_HOST" => "receivinghelpdesk.com" "HTTPS" => "on" "REDIRECT_STATUS" => "200" "REDIRECT_HTTPS" => "on" "FCGI_ROLE" => "RESPONDER" "PHP_SELF" => "/ask/index.php" "REQUEST_TIME_FLOAT" => 1751522928.3407 "REQUEST_TIME" => 1751522928 ]
        request_cookies
        0 of 0
        array:4 [ "XSRF-TOKEN" => "lmL4LN5HkEHW6wiJdVpkzOTk65T4XBndGKYuufvO" "askhelpdesk_session" => "PDvl7cBDKSwHGwAHFuPHZFlqpiiHl972ij053WXm" "_pk_id_64_7c30" => null "_pk_ses_64_7c30" => null ]
        response_headers
        0 of 0
        array:7 [ "content-type" => array:1 [ 0 => "text/html; charset=UTF-8" ] "cache-control" => array:1 [ 0 => "private, must-revalidate" ] "date" => array:1 [ 0 => "Thu, 03 Jul 2025 06:08:48 GMT" ] "pragma" => array:1 [ 0 => "no-cache" ] "expires" => array:1 [ 0 => -1 ] "set-cookie" => array:2 [ 0 => "XSRF-TOKEN=eyJpdiI6IitBdjgxUGh5emNnamZEOFJVcFhOY0E9PSIsInZhbHVlIjoiS05BNzBtelRnSzN2bTNlRXJWTDZieTMySXRTeGFUcG9STTBmWnYvalAxUjRFRnBkd1ZXRDdUUXJ6bmdmb0NvYnZaNGIwT0FGTnMzQ1IyeU15TlBtN2dUanFWNWdUTVdldmMwa2Z5T2RJTHdRU29sY2xxU3ZTd0NWNkVVeHJGZGgiLCJtYWMiOiI1M2YyMzJlYTI4M2E2Yjg1YTAzMzQ4OTRkYzA3OTM3OGZjNTczZWQ2NGQ0MWJhZjA5ODFiYTE0ZDIxMWYxZGE2IiwidGFnIjoiIn0%3D; expires=Thu, 03-Jul-2025 08:08:50 GMT; Max-Age=7200; path=/; samesite=laxXSRF-TOKEN=eyJpdiI6IitBdjgxUGh5emNnamZEOFJVcFhOY0E9PSIsInZhbHVlIjoiS05BNzBtelRnSzN2bTNlRXJWTDZieTMySXRTeGFUcG9STTBmWnYvalAxUjRFRnBkd1ZXRDdUUXJ6bmdmb0NvYnZaNGIwT" 1 => "askhelpdesk_session=eyJpdiI6InRiVC9LaFNpS3BvcVEvQWhxTjFLMGc9PSIsInZhbHVlIjoieklTem9zR0FVNTY2WFBNak5uTlp1b1NpTytiTWNpbmFKbGVnRGx5SU91VFpjWUxDZ01aMUEwSmNZMWhjZVNxcmVIbmx5R295c1ZRL2tsbitjeUtqMFpyV3lVWFVQRFFoZXBXYmd5UHBwcnoyOE4xeFQ4RU5xUzkzcE53QTFsRFoiLCJtYWMiOiI1Y2UyYTk0YjIyNGY3OWY4MjRkOWI0YWQ1MDQyNDRlOWQ2YzI2MDBiMGY1OWNmYzc1MjdlMjYyYjk1Y2QyNzZiIiwidGFnIjoiIn0%3D; expires=Thu, 03-Jul-2025 08:08:50 GMT; Max-Age=7200; path=/; httponly; samesite=laxaskhelpdesk_session=eyJpdiI6InRiVC9LaFNpS3BvcVEvQWhxTjFLMGc9PSIsInZhbHVlIjoieklTem9zR0FVNTY2WFBNak5uTlp1b1NpTytiTWNpbmFKbGVnRGx5SU91VFpjWUxDZ01aMUEwSmNZMWhjZVNx" ] "Set-Cookie" => array:2 [ 0 => "XSRF-TOKEN=eyJpdiI6IitBdjgxUGh5emNnamZEOFJVcFhOY0E9PSIsInZhbHVlIjoiS05BNzBtelRnSzN2bTNlRXJWTDZieTMySXRTeGFUcG9STTBmWnYvalAxUjRFRnBkd1ZXRDdUUXJ6bmdmb0NvYnZaNGIwT0FGTnMzQ1IyeU15TlBtN2dUanFWNWdUTVdldmMwa2Z5T2RJTHdRU29sY2xxU3ZTd0NWNkVVeHJGZGgiLCJtYWMiOiI1M2YyMzJlYTI4M2E2Yjg1YTAzMzQ4OTRkYzA3OTM3OGZjNTczZWQ2NGQ0MWJhZjA5ODFiYTE0ZDIxMWYxZGE2IiwidGFnIjoiIn0%3D; expires=Thu, 03-Jul-2025 08:08:50 GMT; path=/XSRF-TOKEN=eyJpdiI6IitBdjgxUGh5emNnamZEOFJVcFhOY0E9PSIsInZhbHVlIjoiS05BNzBtelRnSzN2bTNlRXJWTDZieTMySXRTeGFUcG9STTBmWnYvalAxUjRFRnBkd1ZXRDdUUXJ6bmdmb0NvYnZaNGIwT" 1 => "askhelpdesk_session=eyJpdiI6InRiVC9LaFNpS3BvcVEvQWhxTjFLMGc9PSIsInZhbHVlIjoieklTem9zR0FVNTY2WFBNak5uTlp1b1NpTytiTWNpbmFKbGVnRGx5SU91VFpjWUxDZ01aMUEwSmNZMWhjZVNxcmVIbmx5R295c1ZRL2tsbitjeUtqMFpyV3lVWFVQRFFoZXBXYmd5UHBwcnoyOE4xeFQ4RU5xUzkzcE53QTFsRFoiLCJtYWMiOiI1Y2UyYTk0YjIyNGY3OWY4MjRkOWI0YWQ1MDQyNDRlOWQ2YzI2MDBiMGY1OWNmYzc1MjdlMjYyYjk1Y2QyNzZiIiwidGFnIjoiIn0%3D; expires=Thu, 03-Jul-2025 08:08:50 GMT; path=/; httponlyaskhelpdesk_session=eyJpdiI6InRiVC9LaFNpS3BvcVEvQWhxTjFLMGc9PSIsInZhbHVlIjoieklTem9zR0FVNTY2WFBNak5uTlp1b1NpTytiTWNpbmFKbGVnRGx5SU91VFpjWUxDZ01aMUEwSmNZMWhjZVNx" ] ]
        session_attributes
        0 of 0
        array:4 [ "_token" => "lmL4LN5HkEHW6wiJdVpkzOTk65T4XBndGKYuufvO" "_previous" => array:1 [ "url" => "https://receivinghelpdesk.com/ask/how-do-i-pair-my-lucci-fan-remote" ] "_flash" => array:2 [ "old" => [] "new" => [] ] "PHPDEBUGBAR_STACK_DATA" => [] ]