Parrot CK3100, CK3300 & CK3500:
- Start the car and ensure the car kit is on.
- Activate Bluetooth on your phone, and search for Bluetooth devices.
- Select Parrot CK from the list.
- Enter 1234 on your phone when prompted.
Why won't my parrot ck3100 pair with my phone?
Check that your Parrot CK3100 has not reached its limit for number of paired Bluetooth devices, which is five. If it has, delete one by going to "Settings" then "Paired devices.". Choose a device to remove from the list then select "Delete.". Go through the Bluetooth pairing procedure on your phone again.
How do I Pair my ck3100 with the handsfree kit?
After you have deleted one or more phones, search from your phone on Bluetooth and select the CK3100 then pair with the handsfree kit. The PIN Code is 1234. If the CK3100 refuses to remember pairing please see this article: Is Your Parrot CK3100 Installed Correctly ?
How do I remove a paired phone from my ck3100?
This will not remove paired phones, but will allow the CK3100 to start from a known state. You wil still need to remove any paired phones manually. After you have deleted one or more phones, search from your phone on Bluetooth and select the CK3100 then pair with the handsfree kit. The PIN Code is 1234.
Does the ck3100 come with a microphone?
The CK3100 comes with a microphone and uses your car radio as a speaker. If you're having trouble with the installation or use of your CK3100 there are some simple troubleshooting measures you can take.
Why wont my Parrot CK3100 connect?
This error is caused, for the most part, by an incorrect installation. When the Parrot CK3100 is turned off it MUST power down correctly by showing “Good Bye” on the screen. If the CK3100 powers off instantly without showing the “Good Bye” message it has been installed incorrectly.
How do I connect my Parrot Bluetooth to my phone?
0:081:21BlueParrott B350-XT Bluetooth Pairing - YouTubeYouTubeStart of suggested clipEnd of suggested clipThen in your cell phone settings menu select bluetooth search scan mode wait while the devicesMoreThen in your cell phone settings menu select bluetooth search scan mode wait while the devices discover each other and select pair on the phone enter the passcode.
How do I put my Parrot in pairing mode?
Parrot MKi9000:Start the car and ensure the car kit is on.Activate Bluetooth on your phone, and search for Bluetooth devices.Select Parrot MKi9000 from the list and enter 0000 on your phone when you are prompted to enter a PIN code.The kit will say "Pairing Successful"
How do you reset a Parrot CK3100?
1. Go into Settings / Bluetooth / Paired Devices and click on a phone you wish to remove. Press centre knob and scroll down to “delete”, then press GREEN button to confirm deletion. Repeat this process to remove all paired phones not required.
Why won't my Blueparrott connect to my phone?
If you are using your headset with an Android smartphone, clearing the Bluetooth cache may resolve issues with pairing, button use, and audio.
How do you turn on a parrot ck3100?
1:032:45Parrot CK3100 Demonstration - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo if we turn the no wheel. Call register dial and what voice coming daddy you turn into menus timeMoreSo if we turn the no wheel. Call register dial and what voice coming daddy you turn into menus time to select those you press the Nelly button.
What does the Blue Parrott button do?
The BlueParrott Button™ is configured out-of-the-box to mute, and will mute the microphone while both off or on a call. Programming is performed using the BlueParrott app that you download to your Android or iOS based smartphone (or on your computer using the BlueParrott Updater program).
Why is my BlueParrott headset blinking red?
A slow flashing red LED while the headset is connected to your phone indicates the battery is low and the headset should be charged. You should also hear a low battery alert Steady red flashing every second on the B350-XT, B250-XT+ and B250-XT indicates the headset is not connected to a device.
What is the multifunction button on Blue Parrot headset?
MFB: Abbreviation for “Multifunction Button .” Multipoint Mode: Multipoint Mode allows you to connect and switch between two Bluetooth devices . Paired: Two Bluetooth devices agree to communicate with one another .
How do I update my parrot ck3100 software?
You need to pair the parrot and the computer first - go to control pannel - Bluetooth Devices - click 'Add@; the computer will search and find the car kit which should be switched on - pair the devices. Then. Use the Parrot update facility with the car kit set to 'Update software' - the car kit will now be found.
How do I pair my hands free parrot?
0:001:13How to Pair a Mobile To A Parrot MKi9200 Bluetooth Handsfree KitYouTubeStart of suggested clipEnd of suggested clipSo bluetooths on there then we click like so turn the rotary control till we get settings clickMoreSo bluetooths on there then we click like so turn the rotary control till we get settings click settings. You've got bluetooth click Bluetooth pair with go down to pair with click pair.
Why is my car Parrot not working?
This may be one of two issues: Check to make sure that the fuse on the battery line is still good and the battery line connections are still good. Check to make sure that the battery line is in fact connected to the battery and not also tied in with the ignition line.
I have removed all paired phones from my Parrot CK3100 but cannot pair another phone
This is quite a common problem and the good news is that the CK3100 is probably not faulty.
But my CK3100 has worked fine for ages.
This still doesn’t mean it was installed correctly to start with. When the CK3100 shuts down with a “Good Bye” it performs memory clearance and general housekeeping.
What to do about this issue
JustCarKits can repair this fault for a reasonable charge, if you are in our installation area. Please call for an appointment.
What is the pin code for CK3100?
After you have deleted one or more phones, search from your phone on Bluetooth and select the CK3100 then pair with the handsfree kit. The PIN Code is 1234.
How to remove power from CK3100?
Remove power from the CK3100 by disconnecting the control box for 5 to 10 mins (to allow capacitors to fully discharge). This will not remove paired phones, but will allow the CK3100 to start from a known state. You wil still need to remove any paired phones manually. No other methods will work.
How to reset a phone that is not a dedicated device?
As there is no dedicated reset function you can accomplish this in one of 3 ways: 1. Go into Settings / Bluetooth / Paired Devices and click on a phone you wish to remove. Press centre knob and scroll down to “delete”, then press GREEN button to confirm deletion .
Can you re-flash a CK3100?
The CK3100 can either be re-flashed with a USB update cable (which we supply) or you can re-programme it over a Bluetooth connection with the Parrot update tool. Re-programming will remove all paired phones. 3.
