Receiving Helpdesk

how do i move my thermostat to another room

by Jamir Torphy Published 3 years ago Updated 2 years ago

To move your thermostat to another room, follow these general steps:
  1. Choose a new location for the thermostat.
  2. Turn thermostat power off.
  3. Remove thermostat.
  4. Run wires to the new location.
  5. Install the thermostat in the new location.
  6. Repower the thermostat.
  7. Repair the old thermostat location.
Nov 9, 2021

How do you move a thermostat into another room?

How To Move A Thermostat Without Rewiring Step 1: Pick Where You Want to Move It. Deciding where to move the thermostat is a key part of the process. Think about... Step 2: Take The Interface Off The Back Panel. The interface should attach …

How much does it cost to move thermostat?

May 10, 2019 · Moving the thermostat: When you are moving your thermostat to another location, you will need to follow the first steps as above. Instead of simply swapping out the thermostat, you will need to locate the new back panel on the adjacent wall. This will require drilling holes in the adjoining wall to seat the back panel.

How do I move thermostat from downstairs to upstairs?

Mar 18, 2020 · To do this, you could either move your existing thermostat and wiring, or achieve a similar effect by getting a thermostat with a wireless remote temperature sensor. In the winter, you'd have the thermostat base its operation on the temp downstairs, and in the summer move the sensor upstairs.

How do I Turn on the thermostat?

How to Move a Thermostat. Turn off the circuit breaker for your furnace or heating system. Snap the thermostat off the back plate, and pull it away from the wall far enough that you can disconnect the wires from their corresponding screwplate electrical contacts. Unscrew the backplate, using the screwdriver, and remove it from the wall.

Can you move the location of a thermostat?

Fortunately, in many cases, it is possible to move a thermostat as a DIY task with just a few basic tools. If you only need to replace the interface or move your thermostat to the adjacent wall, the entire project may only require an hour or so.May 10, 2019

Is it difficult to relocate a thermostat?

Moving a thermostat to a new room far away from the existing cables can be difficult for people with little experience with electrical work. These projects require advanced knowledge of wiring. With wired systems, for example, a cable must run from the HVAC unit to the wall where the thermostat will be installed.Jul 5, 2016

How much does it cost to relocate a thermostat?

The average cost to move a thermostat is $135 to $450, depending on the distance. Drywall repair costs $75 to $150 to patch the old hole and cut a new one, while wiring installation runs $6 to $10 per foot....Cost To Move A Thermostat.LaborAverage CostMoving 20 Feet$195 – $350Moving 30 Feet$255 – $4501 more row

Where in the house should thermostat be located?

The best place for your thermostat is on an interior wall, away from all the areas we previously discussed (direct sunlight, air vents, your kitchen, hallways, windows and doors). Ideally, it should be placed toward the center of your home.

Does the location of a thermostat matter?

Thermostats monitor the temperature in your home and send signals to the HVAC system to adjust the heat or air conditioner to your desired settings. It's crucial to have proper thermostat placement to ensure accurate readings and optimal comfort. So, does thermostat placement matter? The answer is yes.Jan 31, 2021

Can an electrician move a thermostat?

Pros do More Also, the electrician will do more than just install the new thermostat, move it to a new location, and/or add new wiring. They will likely service your HVAC system and check on any other electrical issues throughout the home.

Why you might want to consider moving your thermostat?

0:221:16Why you might want to consider moving your thermostat - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo that it can maintain a strong Wi-Fi signal. Multiple thermostats placed throughout your home willMoreSo that it can maintain a strong Wi-Fi signal. Multiple thermostats placed throughout your home will give you the most accurate temperature. But if you're not quite ready to make that leap.

Should thermostat be in coldest room?

We would not advise putting the thermostat in the coldest room as this would not be a true reflection of the temperature of the rest of the house. You want an average reading for it to work efficiently so placing it in the coldest part of the house would be an extreme cold air temperature zone to avoid.Apr 14, 2020

Why the Nest thermostat needs to be left in one spot

You’ll make it difficult for your Nest thermostat to work as expected if you move it frequently. This can cause unexpected thermostat behavior, and you could get too warm or cold. For instance, don’t unplug it and take it to your bedroom at night, or put it next to your TV while you’re watching a show.

If you must move your thermostat

If you need to clean, it’s fine to move your stand-mounted thermostat temporarily, but you should put it back in the same place, facing the same direction.

How do I install a thermostat?

Remember to first cut power to your HVAC system before working on the project. Here are some steps to follow after that: 1 Remove the interface from the back panel, and slowly disconnect the cables. 2 Remove the back panel from the wall. 3 Install the new back panel, before reconnecting the cables to the new thermostat interface. It’s very important that the wires are connected to the correct ports. If not, the unit will not work properly, and in some cases, it may fail.

Why do you move the thermostat?

Secondly, another common reason to move the thermostat is to better balance air. A poorly placed thermostat can cause uneven heating or cooling throughout the house. For example, a room with many large windows heats ...

Do I need to rewire my thermostat?

There are two instances when moving your thermostat may be a DIY project: Replacements and moving the thermostat to an adjacent surface. In both cases, you do not need to rewire the thermostat, which often requires the help of an HVAC specialist.

Step 2

Snap the thermostat off the back plate, and pull it away from the wall far enough that you can disconnect the wires from their corresponding screwplate electrical contacts. Note which colors connect to which labeled contacts.

Step 3

Unscrew the backplate, using the screwdriver, and remove it from the wall.

Step 4

Drill a hole in the thermostat's new location. The bigger the hole, the easier it will be to fish the wires through to the new location. If the new location is on the opposite side of a wall stud from the old location, you'll either need to drill a hole through the stud or find a hole already used for electrical wires to pass through.

Step 5

Fish the wires through the new hole, using the wire fishing tool or a piece of wire with a hook.

Step 7

Reconnect the wires to the proper contacts on your thermostat, tuck the wires back into the wall, snap the thermostat onto its backplate, and turn the circuit breaker back on.

image
A B C D E F G H I J K L M N O P Q R S T U V W X Y Z 1 2 3 4 5 6 7 8 9