Similarly, you may ask, how do I know what engine my Oldsmobile is? A 2-letter code on the oil filler tube identified the engine. Have the last six digits of the VIN number, the year of the block, and the assembly plant stamped on the driver's side of the block below the cylinder head.
How do I know what engine my truck has?
AFM = 5.3. The RPO codes listed in the glove box will tell you everything about your truck. You can decode them here should you need to do in the future. The eighth digit of your VIN will also tell you your engine. More sharing options...
Why is it important to know what kind of engine your car?
Knowing what sort of engine your car has can make it easier to find the parts you need to keep it running at its best. It’s also interesting to see how much horsepower and torque its capable of, as individual engines can vary from the figures quoted by the manufacturer.
How do I find the VIN number on my car?
How to Find Your Car’s VIN. On many cars, the VIN is located on the dashboard directly beneath the windscreen and can be seen from outside the vehicle. The number is almost always on the front passenger’s side, at the point where the bottom of the windscreen meets the dash.
What should you look for when buying a used car?
Checking performance specs – From capacity to max torque, the VIN offers figures on your car’s individual performance – great for those passionate about knowing the ins and outs of their car. Buying a used car – Before you shake the dealer’s hand, make a note of the car’s VIN, go home, and check it.
Where is the ID number on a engine?
It's all in the engine code (sometimes referred to as engine number) and vehicle identification number (VIN). You can find the VIN in the lower corner of your windshield on the driver's side. In the series of numbers and letters, the tenth from the left denotes the model year and the eighth is the engine code.
How do I identify a Oldsmobile 350 engine?
3:0512:31Oldsmobile V8 Engine Information & Casting Numbers - YouTubeYouTubeStart of suggested clipEnd of suggested clipThere you see that big number 2 right next to the oil pressure switch. That's the code number. ForMoreThere you see that big number 2 right next to the oil pressure switch. That's the code number. For example this is mine right here it's a 68 through 72 350.
How do you read VIN numbers on Oldsmobile?
How to decode an Oldsmobile VINFirst position: country of origin. Where in the world was your Oldsmobile made? ... Positions 2-3: manufacturer information. ... Positions 4-8: vehicle-specific information. ... Position 9: the VIN check digit. ... Position 10: model year. ... Position 11: assembly plant. ... Positions 12-17: vehicle serial number.
How do I identify my Oldsmobile engine block?
Facing the front of the engine, at the top surface of the timing chain area, to the left of the oil fill tube, there is a code about 1.5" high followed by the casting number. A letter indicates a big block, a number indicates a small block. A big block measures 14" between the heads at the manifold base.
How do I identify a 455 engine?
On blocks produced in 1970 and after, you will find 350, 400, or 455 stamped towards the left side of the front of the block. There is no displacement stamp for 421, 389 or 326 blocks. To further identify the year and application, move to the top and rear of the block, where the distributor is mounted.
How do I identify Oldsmobile heads?
The Oldsmobile factory-production small-block cylinder heads are identified by a number cast into the front lower portion of the head next to the number-1 and number-8 cylinders. The oldest castings have a lower number and the latest production castings have a higher number.
How do I look up a VIN number?
You can get a free VIN check at the National Insurance Crime Bureau (NICB), VehicleHistory.com or iSeeCars.com/VIN. Just pop in your car's digits and these sites will do the VIN lookup and give you information on the vehicle.
Where is the VIN number on a 85 Cutlass?
Frequently you can find your VIN number in one of the following locations: on the driver's side door jam (sometimes on the passenger's side), under the windshield on the driver's side, near the firewall of the vehicle or on the steering column.
How do I identify my GM engine?
0:333:27How To Identify Your Chevy Engine Block With Casting NumbersYouTubeStart of suggested clipEnd of suggested clipThis is the driver's side rear for this block. This is a six digit number sometimes or longer thanMoreThis is the driver's side rear for this block. This is a six digit number sometimes or longer than that and that's the number that you're looking for that's what you want to write down.
Where can I find the engine block number?
The engine serial number is on a metal plate attached to the block, typically found on the left-hand side of the engine. The position of the engine plate varies across different engine series.
How do you tell what year your engine block is?
The engine will have a alphanumeric casting number on the passenger side (right side) of the block, under the heads. The first letter of the code identifies the decade (C=1960s, D=1970s, E=1980s), the second digit in the code identifies the specific year. A 1973 motor for instance would be D3, as an example.
luisGMC
Well i just got a 2009 GMC Sierra V8 4x2 with the oem 20" wheels and allmost all the options except NAV and leather.
txab
I hope you didn't pay for a 6 and get a 5.3. AFM = 5.3. The RPO codes listed in the glove box will tell you everything about your truck. You can decode them here should you need to do in the future.
gbieber05
Yeah like "Txab" said with the AFM you have to have the 5.3L they don't offer that in the 4.3 if my memory servers me right.
Nick The Great
Digit 8 of the VIN is an engine code. Though the RPO Code will be just as easy.
VMax2007
Yeah like "Txab" said with the AFM you have to have the 5.3L they don't offer that in the 4.3 if my memory servers me right.
