The Blue indicator lights on the Shark robot indicates the battery percentage. When your Shark robot is charging, both Blue LED will flash. When charging is complete, both blue lights will stop flashing and illuminate steadily.
How do I know if my shark robot is charging?
A solid green light on the side of the charging dock should illuminate. If there is no light on the charging dock, or the light is flashing, try a different outlet. Next, make sure the power button on the side of the Shark robot is turned on.
How do I troubleshoot common shark Ion Robot problems?
Here is a troubleshooting guide with easy-to-follow instructions on how to get around common shark ion robot problems. This error light indicates that your battery is ready to be replaced. Visit sharkclean.com for replacement. This shows that aside brush is stuck. To clear the error, check the side brushes and remove debris if found.
How do I charge my shark robot vacuum?
Charging your Shark robot vacuum is very simple. If your Shark robot is not charging, first, make sure the charging station is plugged properly into a working outlet. A solid green light on the side of the charging dock should illuminate. If there is no light on the charging dock, or the light is flashing, try a different outlet.
How do I charge my shark ion™ W1?
You can charge your Shark ION ™ W1 by placing it on the ION Charging Dock. Please note that only the ION Charging Dock should be used to charge your vacuum.
Why does my Shark robot not charge?
If your Shark robot is not charging, first, make sure the charging station is plugged properly into a working outlet. A solid green light on the side of the charging dock should illuminate. If there is no light on the charging dock, or the light is flashing, try a different outlet.
What does it mean when Shark robot vacuum lights blink?
The meaning of flashing lights on your Shark vacuum largely depends on their color. Blue flashing lights indicate that the battery is charging on cordless models. However, flashing red indicators point to overheating, a burnt motor, or a jammed brush roll.
How long does it take to charge a Shark ion robot?
about 3 hoursHow long does my Robot take to charge? Your Shark ION ROBOT needs about 3 hours to fully charge.
Why is my Shark ion robot blinking blue?
“CLEAN” Flashing Blue If the vacuum's “CLEAN” light is flashing blue, the front wheel sensor, drop sensor, or bumper is reporting an error. Move the robot to a new location on a level surface to make sure it is able to move freely. Make sure that the vacuum's front bumper is not stuck on an obstacle.
How do I know if my Shark battery is charging?
The lights will also blink and illuminate to show the status of the ION Power Pack while charging. In addition, the lights will illuminate in certain configurations to inform you of any issues with the ION Power Pack.
What does green light on Shark mean?
Solid Green: The brush rolls are on and working as they should. Solid Red: There is a jam in the brush roll area. Turn your vacuum off and remove the blockage.
Where is power button on shark ion robot?
NOTE: Before cleaning, the robot's power must be turned on. Press the top of the power switch on the side of the unit to turn on power. TIP: Shark ION ROBOT will automatically return to the charging dock when the battery level is low.
Why is my shark ion robot flashing red exclamation point?
Usually the distressed signal happens for one of two reasons: the robot is stuck and cannot move, or something has caused the main cylinder brush to lock up.
How do I reset my shark ion vacuum?
This is the most recommended way of resetting a Shark ION.Open the shark app on your mobile device. Ensure the app and the robot vacuum cleaner are using the same WiFi network.Go to the settings menu and choose factory reset. The reset procedure will start and the Shark will restore to factory settings.