How To Install Closet Shelves | Rubbermaid Fasttrack Closet Kit
- Secure the top rail. Using the magnetic stud finder, I marked 64” up on the wall. ...
- Install the vertical braces. From here, use each of the four uprights and instead of the 6” gap to the wall, which is recommended, I’m going to take 2” ...
- Secure the uprights to the wall with toggle bolts. How do you secure these uprights to the wall? ...
- Plug and play. ...
How do you install Rubbermaid FastTrack?
Rubbermaid created a storage system known as Fasttrack, and it’s designed to make your storage easier than ever to mount on a wall. The hard part, of course, is figuring out how to install it. To install Rubbermaid Fasttrack, you’re going to have to mount the hooks and tracks on the wall of your choice.
Does the Rubbermaid FastTrack storage system add value to your home?
Unlike most other home storage systems, the Rubbermaid Fasttrack storage system has been proven to add some value to your home. To get the most value out of it, we suggest adding it to your closets, pantry, and your garage walls.
Is Rubbermaid fasttrack the best way to hang ladders?
You could opt for a wall-hanging pegboard or slatwall system. But for its low cost, easy installation and wide storage versatility, the Rubbermaid FastTrack is an exceptional option for hanging everything from ladders to bicycles.
Can you cut Rubbermaid FastTrack rails short?
Yes, but it’s not something you should try to do. Rubbermaid Fasttrack rails should not be cut shorter than 32 inches unless absolutely necessary. This will give you enough length to attach them to three studs comfortably.
How do you install Rubbermaid FastTrack garage shelves?
0:032:27How to Install FastTrack Garage Organization System - YouTubeYouTubeStart of suggested clipEnd of suggested clipToday we're going to organize my garage using Rubbermaid FastTrack. Let's get started.MoreToday we're going to organize my garage using Rubbermaid FastTrack. Let's get started.
How do you attach Rubbermaid shelves?
14:2716:26How To Install Closet Shelves | Rubbermaid Fasttrack Closet KitYouTubeStart of suggested clipEnd of suggested clipSo put the top brackets in which one hold the top shelf and two also will hold the clothing rod nowMoreSo put the top brackets in which one hold the top shelf and two also will hold the clothing rod now i'm going to use the two long sections of shelf and expand those out to fit the closet.
How do you install a Rubbermaid garage shelf?
0:292:28How to Install the Rubbermaid FASTTRACK Organization SystemYouTubeStart of suggested clipEnd of suggested clipOnce we have the rail cover secure on the steel rail then you choose from the variety of hooks thatMoreOnce we have the rail cover secure on the steel rail then you choose from the variety of hooks that we have depending on your needs and just stick them to the wall. This is a utility hook.
What screws to use on Rubbermaid shelves?
Rubbermaid® FastTrack® is ideal for storage spaces requiring greater flexibility and strength. FastTrack® is completely adjustable and works with all Rubbermaid® shelving types. Install rail at desired height using #12 x 2 ½" screws and drywall anchors provided (88" is standard height measured from top of rail).
How do you install track shelf brackets?
0:131:26How to Install Shelf Standards and Brackets Correctly - Quick TipsYouTubeStart of suggested clipEnd of suggested clipThen just scoot your standard over making sure that it's in place. Then take a level and lay itMoreThen just scoot your standard over making sure that it's in place. Then take a level and lay it across the top of both of the brackets. Now just move this standard up and down until it reads level.
How do you install wire shelf support brackets?
0:101:10How To Correctly Install ClosetMaid Shelf Support Brackets - YouTubeYouTubeStart of suggested clipEnd of suggested clipMaking sure that the vertical deck wire sits in between the claw on the bracket. Ensure that theMoreMaking sure that the vertical deck wire sits in between the claw on the bracket. Ensure that the base panel of the bracket it sits flat on the wall and is parallel with the wires.
Can Rubbermaid fast track be cut?
Can FastTrack rails be cut? Yes. Rubbermaid recommends not cutting them smaller than 32″, which will still let them attach to three wall studs. Shorter distances will have significantly reduced overall weight capacity.
How high should you hang FastTrack?
Figure out what height you want to install the rail and make a mark there. Rubbermaid recommends 4' or 7'3”, but I installed mine at 6' after experimenting with the tools I planned on hanging. Install the rack with one screw, check the level, and install the next.
Can you cut Rubbermaid FastTrack wall panel?
within easy reach on trays or in bins. I really like that the Rubbermaid slat wall panels interlock into each other and can be cut easily using a circular saw, table saw or miter saw to form a strong seamless look in any area you are installing them.
Can you drill into Rubbermaid shelves?
The Rubbermaid Black Laminated Wood Shelf can be drilled into however you will need a sharp tool for the best results.
How do you hang wire shelves without brackets?
Use a kit that is labeled to support more than the weight of the items you plan to place on it. You can also mount shelves using support pins or ledges. A support pin functions the same way as an invisible bracket in a floating shelf kit. It resembles a long rod with a flanged end, and fits into the shelf from behind.
How do you secure adjustable shelves?
0:211:00Installing Wood Shelves | freedomRail | OrganizedLiving.com - YouTubeYouTubeStart of suggested clipEnd of suggested clipPlace two shelf locators into each bracket remove the double stick tape. Place a shelf on theMorePlace two shelf locators into each bracket remove the double stick tape. Place a shelf on the bracket. And press it to stick to the Shelf locators.
How Does Rubbermaid FastTrack Work?
The Rubbermaid FastTrack is a rail storage system that mounts on the wall, either horizontally or vertically, depending on the model. Horizontal rails are available in 48” or 84” sections for long runs along the wall. Its heavy-duty steel core is covered in a black PVC cover, providing durability and strength within an attractive cover.
How to Install the Rubbermaid FastTrack System
To install the FastTrack rails, you will need to mount into wall studs. The FastTrack has a high weight capacity but drywall cannot support the system and equipment weight. If you cannot mount every screw into a stud, be sure to use appropriate weight-rated drywall anchors for your drywall’s thickness.
How To Plan Out Your Rubbermaid FastTrack System
The first step in setting up the Rubbermaid FastTrack rail system is to plan what you need to store with it and where you want to mount it. FastTrack does an excellent job of curating FastTrack Kits, which come complete with popular mounting accessories for particular storage types.
How Much Weight Can Rubbermaid FastTrack Accessories Hold?
Accessories have different weight capacities to consider when planning your storage. The rails themselves can hold up to 300 pounds when properly mounted but an overloaded hook can easily cause failure. Follow these weight guidelines for common FastTrack accessories:
Is This A DIY Project You Can Do?
The light weight, simple design and pre-install work done on the rails makes installation intuitive and stress-free. You can hire a professional if you are concerned about damage but in most cases, you can set these up with few possible issues. Have the following tools on hand to make set up as quick and accurate as possible:
Can Rubbermaid FastTrack rails be cut?
FastTrack rails can be cut, though there is a limit to how much you can take off. Most studs are situated 16 inches apart so keep your lengths to a 32 inch minimum to ensure you can rest the track on at least three studs. If you wish to cut down rails, use clamps to secure the rail while you make the cut with a hacksaw.
Where Can I Find FastTrack Assembly Instructions?
For all of your assembly needs, visit the FastTrack Assembly Instructions page on the Rubbermaid website. Scroll down or search for “FastTrack garage” to find instructions on all current and discontinued FastTrack systems.
