10 Tips for Installing a Kohler Highline Toilet
- Remove the Old Toilet and Install the Wax Ring on the New Toilet. ...
- Position the Toilet on the Drain Flange. Flip the toilet again, so it is now upright, with the bowl facing upward, and carefully set it onto the floor over the ...
- Compress the Wax Ring. Once the T-bolts are extending through the mounting holes on the base of the toilet, apply weight to the toilet bowl to press it down and ...
- Check Measurements. Use a tape measure to double-check the measurements between the toilet bowl and the back wall. ...
- Secure the T-Bolts at the Base of the Toilet. Add the included plastic washer, metal washer, and nut (in that order) onto the two protruding brass T-bolts sticking up from ...
- Prepare the Tank. A peculiarity of the Kohler Highline toilet is that the gasket bolts on the bottom of the tank need to be forced back into the tank for ...
- Tighten the Tank Bolts. Thread the mounting nuts onto the tank bolts and hand-tighten them with your fingers. ...
- Level the Toilet Tank. As you are turning the tank's bolts, keep a bubble level on the top of the tank to check for level, both side-to-side and front-to-back.
- Cut Off the Mounting Bolts. Some toilets come with two sets of floor mounting bolts, allowing you to choose the set that best matches your toilet flange.
- Connect the Water Supply and Attach the Toilet Seat. If you are installing a new flexible water supply tube, connect it now. ...
Full Answer
How to install a Kohler Santa Rosa toilet?
Install brackets. Plastic Trap Outlet Toilet Gasket Fig.#8 8 Install plastic to ground and mounted with 3 set of bolts firmly.(not supplied) 3() NOTE: Must use the toilet installation gasket ring (not supplied) to seal the area where the waste pipe contacts the construction section to avoid leakage. Fig.#4 4 Fig.#5 5 Drain Hole Fig.#6 6 3/8 10mm 10mm 5
How to install a Kohler elongated toilet seat?
- Elongated closed-front seat
- Grip-tight bumpers hold seat firmly in place
- Quick-release hinges allow seat to be unlatched from toilet for easy removal and convenient cleaning; no tools required
- Color-matched plastic hinges
- Contoured seat for user comfort
- For residential use only
- Plastic
- Quick-attach hardware for fast and secure installation
Should I put tile first before installing a toilet?
Installing the toilet can only happen once your bathroom floor tiles, whether ceramic or vinyl, are properly installed. Depending on what kind of tile and adhesive you used, your waiting period may be anywhere from minutes to several days. It's generally safest to wait 48 to 72 hours after installing ceramic tiles before installing the toilet.
How to install a Kohler touchless toilet flush kit?
- Easy installation
- Easy to use
- Reduces contact with germs
- Kid-friendly/fun to use
- You can still retain the flush handle
How do you install a Kohler toilet?
0:002:13Installation - KOHLER Toilet Tanks - YouTubeYouTubeStart of suggested clipEnd of suggested clipLower the toilet tank onto the toilet bowl. Slide the washers on to the bolts. And loosely thread onMoreLower the toilet tank onto the toilet bowl. Slide the washers on to the bolts. And loosely thread on the nuts. Alternately hand tighten each of the hex nuts onto each of the bolts.
Is it easy to install a toilet by yourself?
Replacing and installing a new toilet isn't as hard as it sounds. All you need are a few hours, a helper and the right tools and toilet parts for the job.
How do you install a toilet from start to finish?
1:243:30How to Install a Toilet - YouTubeYouTubeStart of suggested clipEnd of suggested clipSet the toilet directly over the bolts. And put your weight on it to squish the wax ring down untilMoreSet the toilet directly over the bolts. And put your weight on it to squish the wax ring down until the base of the toilet is setting on the floor.
How do I install my own toilet?
2:353:50How to Replace a Toilet - DIY Network - YouTubeYouTubeStart of suggested clipEnd of suggested clipSit. Down on the toilet. And help it make the seal with the wax ring to ensure a snug level thin addMoreSit. Down on the toilet. And help it make the seal with the wax ring to ensure a snug level thin add the washers that should have come with the bolts.
Should you caulk around a toilet?
Caulk Keeps the Toilet Secure Think again! Caulk keeps your toilet secure the floor, and avoids any chance of injury or toilet malfunctioning. It's actually required by the International Plumbing Code to caulk a toilet to the floor, and now knowing the reasoning behind it, why would you not want to?
How long does it take a professional to install a toilet?
approximately 2 to 4 hoursIt takes approximately 2 to 4 hours for a plumber to install a toilet at a base rate of $65 per hour. If the plumber runs into any unexpected issues after the installation begins, it can raise labor costs by as much as $800.
Should toilet flange be flush with floor?
0:214:10The Correct Height of a Toilet Flange - YouTubeYouTubeStart of suggested clipEnd of suggested clipThing you want to do is remember that all toilet flanges should always be installed on top of theMoreThing you want to do is remember that all toilet flanges should always be installed on top of the finished floor.
How is a toilet connected to the floor?
0:375:17How to Fix a Toilet - Parts - Flange - YouTubeYouTubeStart of suggested clipEnd of suggested clipThe toilet flange is what physically holds the toilet in place and therefore must be securelyMoreThe toilet flange is what physically holds the toilet in place and therefore must be securely attached to the sewer inlet and the floor.
How do you align a toilet flange?
1:094:12How to Install a New Toilet Flange | Ask This Old House - YouTubeYouTubeStart of suggested clipEnd of suggested clipUsing an old shim. Good. This is actually a compression flange. We're going to be using a rubberMoreUsing an old shim. Good. This is actually a compression flange. We're going to be using a rubber gasket and that will make a nice tight seal between the bend. And the flange.
What do I need to know when replacing a toilet?
0:161:50Things to Consider When Purchasing a New Toilet | The Home DepotYouTubeStart of suggested clipEnd of suggested clipBut smaller bathrooms may only accommodate around Bowl you might also consider a water saving toiletMoreBut smaller bathrooms may only accommodate around Bowl you might also consider a water saving toilet it only uses 1.28 gallons per flush now they'll save both water and money.
How do you connect a toilet to a sewer line?
0:2612:06Installing Sewer Pipe for Toilet | Earthbag Kitchen & BathroomYouTubeStart of suggested clipEnd of suggested clipSo that's about a half an inch in two feet if we take our shoes off and count that up so I put aMoreSo that's about a half an inch in two feet if we take our shoes off and count that up so I put a little half-inch kind of a block on the end of my two foot. Level.
How long does it take to set a toilet?
one to four hoursThe time frame for fitting a toilet varies from one to four hours, depending on your level of DIY experience. Any new toilet installation requires prior preparation and, essentially, working backwards from removing an old toilet.
Are Kohler toilets easy to install?
Kohler toilets are easy to install. It doesn’t require special skills to install the toilet. You can install the toilet yourself without hiring any...
How do I adjust the water on my Kohler toilet?
It is important that your toilet tank have the proper amount of water. This will ensure the toilet flushes properly. The Kohler toilet has an indic...
Are Kohler toilets good?
Kohler toilets are good as they have a lot to offer. They offer the perfect mix of style as well as functionality. The look of the Kohler toilets i...