How To Inflate A Lay Z Spa - 5 Easy Steps
- Preparation Steps For Easy Inflation. The first thing you’ll need to consider before unpacking your new hot tub is where you are going to put it.
- Connect The Pump. Once you have the hot tub in position, you need to connect the pipe from the airjet outlet on the air pump (the narrow one) to ...
- Inflate Your Lay Z Spa. ...
- Inflating The Lid. ...
- Final Steps. ...
How long does it take to set up a Lay-z-spa?
Lay-Z-Spa hot tubs require no tools for set up and are inflated by using the supplied pump. This takes approximately 5 minutes. Please refer to your Instruction Manual for specific set up information or watch our handy Setup Videos.
What should I do if my Lay-z-spa tub keeps deflating?
This is normally the first thing you should think of if your tub starts deflating regularly. A puncture could occur for any reason. Why Lay-Z-Spa tubs are generally very robust and durable, they are still susceptible to sharp points and objects likely to tear. You should be very careful to check the full lining once completely deflated.
What is the best position for my Lay-z-spa?
We recommend that you position your Lay-Z-Spa on a raised platform and in a covered or sheltered area. This will protect your hot tub from too much sunlight in Summer and from the elements in Winter.
Can children use a Lay-z-spa step and surround?
For those who suffer from arthritis or struggle to move, we recommend a Lay-Z-Spa Step and Surround as they can provide extra assistance and support when entering and exiting the spa. Can Children Use A Hot Tub? A Lay-Z-Spa is not a paddling pool or a toy and therefore is not suitable for children under 8 years old.
How to reduce wind exposure in a lay-z-spa?
What is a layz spa?
What temperature should a spa be?
How far away should a hot tub be from the ground?
When does a spa heater switch on?
How long should a child use a lay-z-spa?
Is chlorine good for hot tubs?
See more
How do you inflate a Lay Z hot tub?
1:396:36Lay-Z-Spa Vegas Inflatable Hot Tub 2014 Set Up Video - YouTubeYouTubeStart of suggested clipEnd of suggested clipSimply hold down the lock button for 3 seconds to release the controls. Following the numbers on theMoreSimply hold down the lock button for 3 seconds to release the controls. Following the numbers on the spa inflate the chambers. Sequentially.
Why is my lazy spa not inflating?
Your inflation valve is too loose. Ensure that the valve is fully inserted and fully secured into the inflation hole. If the troubleshooting does not resolve the problem, please contact the aftersales team for further advise and so we may assist further.
How do you inflate a Bestway lazy spa?
C AssemblyUnfold the spa from the packaging. Spread the spa and cover. ... Open the air outlet on the spa. Screw one end of the inflation hose onto it.Open the air valve on the spa. Connect the other end of inflation hose into the valve.Inflate the spa tub by pressing the “bubble” button.
How do you use a Lay Z Spa pump?
1:448:12Lay Z Spa Operating Instructions for Lay Z Spa Control Panel - YouTubeYouTubeStart of suggested clipEnd of suggested clipOn press and hold. The power button and the power button will light up green and the display willMoreOn press and hold. The power button and the power button will light up green and the display will come up bright with the temperature. By default the display.
How do you know when lazy spa is inflated?
How do I know when the spa is properly inflated? On the Monaco, Palm Springs Siena, Hawaii AirJet and the HydroJet models come with a pressure gauge, these should be inflated to between 7-10psi. The Vegas Miami, Paris, and other models should be inflated until touch soft.
Why has my hot tub deflated?
It may simply be that your tub's inflation valve or deflation valve adapter is faulty, or that it's too loose. A loose inflation valve is likely to be a key cause of air escaping through a Lay-Z-Spa. Once again, it can be uncommon for problems like this to arise in the most robust of tubs.
Do you inflate the bottom of an inflatable hot tub?
2:3510:35HOW TO SET UP your new Lay-Z-Spa HOT TUB - YouTubeYouTubeStart of suggested clipEnd of suggested clipBill once you've got the insulating mats in position then you need to inflate it roughly position itMoreBill once you've got the insulating mats in position then you need to inflate it roughly position it in place.
How do you inflate Lay-Z-Spa Cancun?
0:539:15Lay-Z-Spa™ Set-Up Video - YouTubeYouTubeStart of suggested clipEnd of suggested clipUp using the pump we can inflate the spa attach. The inflation hose to adapter a on the pump. Now weMoreUp using the pump we can inflate the spa attach. The inflation hose to adapter a on the pump. Now we can activate the pump by pressing the Lazy massage button and begin to inflate the spa.
How do you set up a hot tub for the first time?
How to Start a Hot Tub in 12 Easy StepsRinse and Drain. If you're a new hot tub owner, you're going to have to get used to the cleaning that comes with hot tub ownership. ... Turn off All Power. ... Clean the Empty Hot Tub. ... Install or Clean the Filter. ... Fill Your Hot Tub. ... Prime the Pump. ... Add the Start-Up Chemicals. ... Run the Pump.More items...•
Should my inflatable hot tub pump run all the time?
Leave it running! This may be surprising to hear, but turning your inflatable spa off frequently is actually not the most efficient. If you want to use your inflatable hot tub regularly, say more than three times a week, the most economical and effective way is to keep the spa heater running.
How long does it take to heat up a hot tub for the first time?
When heating your hot tub for the first time, or for the first time each year, you will be raising the temperature from an average temperature, around 55 degrees, to around 102 degrees. A 110v hot tub will take one to two days to reach optimal temperatures from this starting point.
How to reduce wind exposure in a lay-z-spa?
Surroundings: Placing your Lay-Z-Spa near a windbreak such as a fence will help to reduce wind exposure, helping it to retain more heat and in turn help to reduce your running costs. You should also consider where you will drain the water when required.
What is a layz spa?
Whenever the Lay-Z-Spa's heater is turned on, the filtration function is automatically activated.
What temperature should a spa be?
When not in use, we would recommend setting your spa at a temperature of between 34°C and 38°C, and then an hour or so before increasing this to 40°C. A Lay-Z-Spa's heater is thermostatically regulated. The heater will therefore only switch on when the temperature falls a couple of degrees below your desired temperature.
How far away should a hot tub be from the ground?
The socket that the hot tub is being plugged in to should be grounded and at least 4 metres away, at a height of at least 1.2m from the ground. Please Note: You should not overload your plug socket. We recommend that you only run power to your Lay-Z-Spa from a plug socket and nothing else at the same time.
When does a spa heater switch on?
The heater will therefore only switch on when the temperature falls a couple of degrees below your desired temperature. Consequently, this is much better than letting your spa's water rise and fall from hot to cold, as this will require much more energy to bring the spa back up to temperature.
How long should a child use a lay-z-spa?
We recommend that children over 8 years old only use a Lay-Z-Spa for a maximum of 10 minutes at a time.
Is chlorine good for hot tubs?
Chlorine or bromine is a powerful sanitiser which is necessary to keep your hot tub clean and healthy. As a body of still water, a hot tub runs the risk of becoming stagnant and dangerous if not treated properly. Therefore, it is essential to use ClearWater Chemicals to help maintain the water health of your spa.
Why does air shoot out of my tub?
It doesn’t always have to be a puncture that’s causing air to shoot out of your tub. It may simply be that your tub’s inflation valve is faulty, or that it’s too loose. A loose inflation valve is likely to be a key cause of air escaping through a Lay-Z-Spa.
Can a lay-z spa tub be punctured?
A puncture could occur for any reason. Why Lay-Z-Spa tubs are generally very robust and durable, they are still susceptible to sharp points and objects likely to tear. You should be very careful to check the full lining once completely deflated.
Can an inflatable spa leak?
One of the biggest problems inflatable spa owners may face is a deflating hot tub . Unfortunately, as a fully inflatable system, there may come a time when you find that your spa springs a leak. The best tubs and spas should hold up for years to come.
How to reduce wind exposure in a lay-z-spa?
Surroundings: Placing your Lay-Z-Spa near a windbreak such as a fence will help to reduce wind exposure, helping it to retain more heat and in turn help to reduce your running costs. You should also consider where you will drain the water when required.
What is a layz spa?
Whenever the Lay-Z-Spa's heater is turned on, the filtration function is automatically activated.
What temperature should a spa be?
When not in use, we would recommend setting your spa at a temperature of between 34°C and 38°C, and then an hour or so before increasing this to 40°C. A Lay-Z-Spa's heater is thermostatically regulated. The heater will therefore only switch on when the temperature falls a couple of degrees below your desired temperature.
How far away should a hot tub be from the ground?
The socket that the hot tub is being plugged in to should be grounded and at least 4 metres away, at a height of at least 1.2m from the ground. Please Note: You should not overload your plug socket. We recommend that you only run power to your Lay-Z-Spa from a plug socket and nothing else at the same time.
When does a spa heater switch on?
The heater will therefore only switch on when the temperature falls a couple of degrees below your desired temperature. Consequently, this is much better than letting your spa's water rise and fall from hot to cold, as this will require much more energy to bring the spa back up to temperature.
How long should a child use a lay-z-spa?
We recommend that children over 8 years old only use a Lay-Z-Spa for a maximum of 10 minutes at a time.
Is chlorine good for hot tubs?
Chlorine or bromine is a powerful sanitiser which is necessary to keep your hot tub clean and healthy. As a body of still water, a hot tub runs the risk of becoming stagnant and dangerous if not treated properly. Therefore, it is essential to use ClearWater Chemicals to help maintain the water health of your spa.
