OE Error Code - Top Load Washer.
- Press POWER to turn the washer on.
- Press the SPECIAL USE key until SPIN ONLY is lit.
- Press the START/PAUSE button to begin the cycle.
- The unit should begin a SPIN ONLY cycle and attempt to drain any remaining water that is inside the washer.
- If you were able to run the SPIN ONLY cycle with no issues, perform a TUB CLEAN cycle to wash away any buildup that may have formed while the OE error ...
How to identify LG washing machine error codes?
- Turn off the washing machine and remove the plug from the wall socket.
- Remove the top of your LG Washing Machine by removing the screws, holding them down, pulling the top backward, lifting it off, and placing it aside.
- Remove the soap drawer entirely by pulling it out and unscrewing the components that hold it in place
What are some common LG washer error codes?
Select LG error code on your display:
- FE – Water Overflow Error
- OE – Drains Slowly
- IE – Inlet Water Supply
- UE or UB – Unbalanced Load
- CL – Child Safety Lock
- LE – Locked Drive Motor
- tCL – Tub Clean Cycle
- dE – Door is Open
- CE – Over Current in the Electrical Circuit
- SUD – Suds Reducing Cycle
What does OE error code mean on washing machine?
Test the drain pump.
- Press POWER to turn the washer ON.
- Press the SPIN SPEED key until HIGH is selected.
- Press the START/PAUSE button to start the SPIN ONLY cycle.
- Listen to hear a humming sound which indicates that the drain pump motor has started working.
What is UE error code mean on LG washing machine?
LG front-load washer UE error code
- Balance the load. Try the following solutions to get your washer spinning again. ...
- Level the legs. If the LG washing machine UE code appears when the load is balanced, check the leveling legs under the washer.
- Check for a broken part. These tips will help you resolve most problems that cause the UE error code on an LG front-load washer.
How do I reset the OE code on my LG washer?
Run tub clean cycle. Once the drain pump begins sucking air instead of water, the pump signals a drain issue to the unit. Perform a TUB CLEAN CYCLE and REDUCE DETERGENT usage. Run the new cycle to see if the code is cleared. If the OE error code appears again, the unit may require a repair service.Jul 2, 2019
How do I clean my LG washing machine drain pump?
0:412:02LG Washer - Cleaning the Drain Pump Filter (2018 Update) - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd remove the access panel by pulling a tab downward. And out revealing a drain hose and drain pumpMoreAnd remove the access panel by pulling a tab downward. And out revealing a drain hose and drain pump filter. Pull the drain hose carefully. And set a pan and remove the plug from the hose allowing.
How do I unclog the drain hose on my LG washing machine?
0:571:54"OE" - LG Washer not draining - CLOGGED Drain Hose - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo on the back side of your washing. Machine maybe disconnect that hose. And check inside it makeMoreSo on the back side of your washing. Machine maybe disconnect that hose. And check inside it make sure that there are no debris.
How do I manually drain my LG washing machine?
Press the POWER button to turn the washing machine off and remove the plug from the outlet. Locate the service panel on the bottom-left corner of the unit and open it. Unclip the drain hose and remove the plug from the drain hose to drain the water remaining inside the wash tub.Mar 23, 2021
Where is the drain pump filter on my top load LG washer?
Top Load Washer – Lint / Pump FiltersThere are 2 crescent-shaped Fine Mesh plastic lint filters in the bottom of the wash basket under the agitator. …During drain down and spin, the water forces the lint off the bottom of the filters and down the drain.These filters should never require cleaning or replacement.
How do you unclog a washing machine drain pump?
1:143:17Washer Repair: How to Unclog the Drain Pump - YouTubeYouTubeStart of suggested clipEnd of suggested clipCompress that spring clamp. Slide it up the hose. And pull it off you may find something directly atMoreCompress that spring clamp. Slide it up the hose. And pull it off you may find something directly at the input to that pump.
Why won't my LG top load washer drain?
Unbalanced Load. One of the most common reasons your LG washer won't drain often results from an unbalanced load. Washing a large or heavy item can cause it to settle on one side of the washer drum. When this happens your LG washer won't drain or spin properly and water will be left behind.Feb 1, 2020
How do you fix an unbalanced LG washer?
If the load appears unbalanced, consider adding or removing items to balance it out. Often, bulky or large items, like pillows and blankets, or sometimes small loads, can cause the washer to be off-balance. Consider adjusting the wash cycle's settings or add or remove items to fix the issue.Jun 7, 2021
How do I clean the filter on my LG washing machine?
0:002:23[LG Washer] - How to clean the drain filter - YouTubeYouTubeStart of suggested clipEnd of suggested clipLG washing machine how to clean the drain filter hoping to cover first now pull out the tube not tooMoreLG washing machine how to clean the drain filter hoping to cover first now pull out the tube not too far because you can block it hold it high and remove the cap care collect the water.
Why is my LG washer displaying OE code?
Unbalanced Load. One of the reasons that your LG washer is displaying OE code is due to an unbalanced load. When you wash a large or heavy item, it can settle on one side of the drum. This can cause the machine to go out of balance, and water may remain in the drum. To avoid this, try throwing a few lighter items in with a heavier one ...
How to check LG washing machine drain hose?
To check if your LG washing machine’s drain hose is causing issues, simply remove it from the back of the washer and see if it has any kinks or bends. If you notice that the hose is crimped or curved in a way that prevents water from flowing through it properly, you can easily straighten it out.
Why does my washer door lock not open?
The wires connecting the lock or switch to the control board can be loose. If your washer’s door lock does not allow you to open or close the door, ...
Where is the drain pump filter located on a washing machine?
Before you can clean the drain pump, you need to open the access panel. Luckily, it’s located right on the bottom of the machine in front of the filter housing. After you remove the two screws that hold it in place, lift the cover-up and set it aside.
Why won't my washer open the door?
If your washer’s door lock does not allow you to open or close the door, it is because the door switch and lock assembly have broken. It is always best to replace this assembly, as attempting to fix it may cause further damage.
How long does it take for a washing machine to save?
A washing machine can save you hours, days, even weeks in time over the course of its lifetime. However, it can be frustrating when a fault occurs. Fortunately, some of these faults can be detected and fixed quickly and easily on your own using the help of an error code reader.
Does LG have a drainage problem?
That being said, LG washing machines can also experience some problems with drainage issues. This article will help you diagnose and fix the LG Washer OE code so that your washer is back in business.
What Causes the OE Error Code?
The OE error code will show when the washer is not draining quickly enough. The washer is trying to drain, but the control panel is sensing that it cannot drain properly. The usual causes of the OE error code are a faulty drain pump, a kinked or clogged drain hose, or a clogged pump filter.
1. Reset the Washer
Occasionally, the OE error code is caused by a control board glitch. Therefore, resetting the control board by disconnecting the power for five minutes may solve the issue. Disconnecting the power to resolve the error code may also work if you do not have time to fix the issue.
2. Clean the Pump Filter (Front-Loader Washers)
Many LG front-loader washers have a pump filter or debris filter that can be accessed on the front of the washer. LG recommends removing lint and foreign objects from the pump filter at least monthly. Making sure the pump filter is cleaned regularly will prevent odors, mold, and mildew and will allow the washer to drain correctly.
3. Check the Drain Hose
If the washer will not drain, the drain hose may be kinked, pinched, or obstructed by a small object. It is also possible that the drain hose outlet has been submerged in water, which would restrict the washer’s draining ability. Another thing to check is that the drain hose is installed correctly.
4. Test the Drain Pump
To test the drain pump, run a spin cycle to see if you can hear it working. To perform the test, press the Spin Speed button until HIGH is visible. Then, press the START/PAUSE button to start the spin cycle. You should now hear a humming noise, which indicates the pump is working.
5. Check the Drain Pump & Internal Drain Hose
If you have completed the checks above and the drain pump is not working or the error code persists, the drain pump or internal drain hose may have a problem that will require accessing them to fix the issue.
Conclusion
Hopefully, these instructions have fixed the drainage issue and the error code has been resolved. If the error code persists, you may need to hire a trained professional to check that the control board is not defective and causing the issue.
How to remove the top of LG washer?
First, disconnect the power from the washer to prevent electrocution. 2. Then, you’ll need to locate the screws holding the top of your LG washer in place, and remove them. After removing the screws you’ll pull the top toward the back of the machine and lift upwards. 3.
Why is my washer hose crimped?
When washers are pushed too far back against a wall the drain hose can end up getting crimped. When the hose has bends or kinks it can prevent the proper flow of water through it. If you see that the hose is not straight you’ll simply need to straighten it out and ensure it has no blockages.
Meaning Of an OE Error Code on an LG Washing Machine
Quite simply, an OE error, also known as a water outlet error, means that your washing machine can’t drain the water and is, therefore, unable to complete the wash cycle.
Causes of an OE Code
Usually, the reason for your LG washer not draining has to do with its drainage system. This system includes the drain hose, drain pump, and drain pump filter.
How to Fix This Error Code
First things first, make sure you unplug your washing machine from the power source and shut off its gas and water supply to remove any risk to yourself.
Conclusion
An OE error code on an LG washer means that it’s unable to drain the water and complete the wash cycle. This is usually due to a problem in the water draining process, so start looking there.
Step 1. Check the drain hose for obstructions
If the drainpipe is clogged or has a sharp bend. It may be the reason your washing machine cannot expel the water. Hence, the oe error occurs.
Step 2. Check the drain pump filter and clean it
The drain pump filter normally is located at the bottom front of your LG washing machine. Whether it is top load or front load, most likely the location is still the same.
Step 3. Call the washing machine brand service center
This is your last option. As it seemed your washers issue is beyond normal. You need to seek the help of a technician trained to deal with your washing machine.
