Asked by: Shahnaz Kornetzky.
- Squirt the toothpaste onto a lint-free cloth. As before, a clean rag made from cotton or microfiber is ideal.
- Gently wipe the scratched area. Rub the toothpaste over the scratched area.
- Wash off the toothpaste. Hold the CD under running water.
- Dry the CD.
- Eject the problematic disc if it is still in the system.
- Power the system off and ensure it is placed correctly.
- After 30 seconds has passed, power the Wii U back on.
- Insert the disc. Be sure to verify you are inserting it correctly.
How do I fix the read error on my Wii?
09/09/2008 · A flaw in the disc could prevent the console from reading it. Hold the bottom side of the disc to the light to see any smudges or scratches. If a smudge is the culprit, cleaning the disc often fixes the problem. Use a microfiber cloth like the ones used to clean eyeglasses.
Why Wii won’t read discs?
13/02/2020 · Spray the special cleaning solution on the optical part (surface) of the disk. Use the soft and clean cloth to gently clean the surface of the disk. Wait until the disk is dried and then insert it into the Wii console. After these three steps, you can go to check whether Wii can successfully read the inserted disc.
How do I fix a dirty disc on my Wii?
16/03/2020 · How do I fix my Wii U when it wont read discs? If your Wii has trouble reading a dual-layer disc, use a lens-cleaning kit to clean the lens in the console. If you cleaned the disc and the game console and the disc still won't play, the disc may be bad. Use the right disc for the console. The Wii and Wii U are different consoles.
How do I fix error 2 on my Wii disc?
28/11/2021 · Here are a few methods to try to fix your scratched disc at home: Rubbing Alcohol Method: Get a lint free non scratching cloth. Toothpaste Method: Use a small dab of the gritty type of toothpaste. Banana Method: Use a banana that is peeled and cut in half. Skip Scratch Fixer Method: Petroleum Jelly Method:. How do I clean my Wii U disc reader?
How to clean a Wii disc?
You need to strictly clean the disk by following these steps without damaging the disc further: 1 Spray the special cleaning solution on the optical part (surface) of the disk. 2 Use the soft and clean cloth to gently clean the surface of the disk. 3 Wait until the disk is dried and then insert it into the Wii console.
Why is my Wii disk dirty?
The disc is dirty: it is quite possible that the disk the console tries to read is dirty. In a situation like this, the Laser Lens can have issues to read the disk. Why? The Laser Lens uses an optical laser to read the target disk. If the disk is dirty, the Laser Lens may not properly read the disk and you may receive an error message saying Wii ...
What happens if the Wii is dirty?
If the disk is dirty, the Laser Lens may not properly read the disk and you may receive an error message saying Wii Unable To Read Disc or other error messages. The Laser Lens is dirty: the Laser Lens can also get dirty. If so, it will not properly scan and read the disk.
How to check if a Wii disk is read?
Use the soft and clean cloth to gently clean the surface of the disk. Wait until the disk is dried and then insert it into the Wii console. After these three steps, you can go to check whether Wii can successfully read the inserted disc.
Can you play a Wii U disc?
When you use it to play games, you may encounter different kinds of issues like Wii or Wii U not reading disc, the game is freezing or crash on Wii or Wii U, Wii or Wii U won’t play disc, and more.
Why won't my Wii U read discs?
The Laser Lens is broken: if the Laser Lens is broken, you will, of course, the Wii U not reading disc issue. After you use the Laser Lens for a long time, it may get damaged. This is a common issue. But, the damaged Laser Lens can’t be fixed and you need to replace it with a new one. Now, you know the causes of the Wii won’t read disk ...
How to make a disc rotate?
Tape the ends of the soft fabric to the disk. Use a sturdy but thin thread to stick the fabric to the end of the disk. Tape the fabric as well. At the same time, you need to make sure that the tape is not above the fabric and thin. Insert that disc inside the console and make it rotate.
