- Connect the iClicker base to a USB port directly in your computer. The base’s LCD screen will light up. ...
- Locate the iClicker ID Finder software on the iClicker Downloads pages under Utilities. You can save the software to your hard drive or a flash drive.
- Unzip the file by opening the folder, locating ClickerID.exe, and selecting Extract all files .
- A simple Clicker ID interface will appear. If you plan to display the base to students (in lieu of or in addition to the computer screen display), make sure Display ...
- Instruct students to vote (pressing any choice) on their iClicker remote.
- The remote ID and vote choice will be displayed for 10 seconds. During that time, additional voting is disabled. This ensures each student has time to record their remote ID. ...
- The software and base LCD will reset after 10 seconds so additional students can use the application.
Where can I Find Your iClicker remote ID?
Your iClicker Remote ID is an 8-digit code found on the back of your iClicker remote.
What is my ClickBank ID?
What is my ClickBank ID? Your ClickBank ID is the same thing as your ClickBank Account Nickname. For more information about your Account Nickname, check out this article.
Where can I purchase a clicker?
If you’re using a physical clicker, purchase your clicker from the University Bookstore. Inside the box is a small card that has your subscription code in red text. DO NOT THROW AWAY YOUR CARD!
How do I Register my Clicker to my class account?
Before students can use their clickers in your classes they will need to register their clicker to an account on Turning Technologies’ website. If you’re using a physical clicker, purchase your clicker from the University Bookstore.
How do I register my clicker remote?
Your remote ID is printed on your iClicker remote as an 8-character code (see image). Your instructor will provide the answers to the following questions in order to register your remote for their class. Be sure to contact your instructor before you register.
How do I know if my iClicker is registered?
Navigate to the iClicker remote registration link in your school's learning management system (e.g., Blackboard, Canvas, Moodle, Brightspace by D2L, or Sakai). If you have registered correctly, your Remote ID and Date Registered will appear on this page.
How do I connect my iClicker?
Table of contentsMake sure you are logged in to the correct Achieve account.Click the yellow banner to connect iClicker.Connect your iClicker account.Your accounts are now linked.Enroll in your instructor's iClicker course.Disconnect your iClicker account.
How do I register a used clicker?
Both of you can simply register the remote with your respective names and student IDs. Please note: If your course requires you to register on i>clicker.com, the second person who registers a used/borrowed remote will be charged the remote registration fee of $6.99.
How do students use iClicker?
How do I use my iClicker? To turn on your iClicker, press the On/Off button at the bottom of the clicker. The power light should shine blue. The clicker will remain on for 90 minutes as long as there is an activated base in your classroom.
How do you connect iClicker to base?
Connect the iClicker base to the computer using the white USB cable. Then connect the USB data stick to the iClicker Base. Open the corresponding drive that contains the iClicker folder. Run the iClicker application file (highlighted above) • Click on “+ Create” to create your course.
How do I redeem my iClicker access code?
Table of contentsGo to the iClicker student web app.Sign in to or create your iClicker account.Navigate to "Subscriptions"Enter your access code.Confirm your access code was redeemed on the "Subscriptions" page.Additional help with iClicker student app access codes.
Can you reuse an iClicker?
Can students share or reuse their iClicker remotes? Yes. They can use a remote for any course that uses i>clicker for the rest of their college career at USU or elsewhere. They can also share remotes with other students, as long as they are not taking the same course as the person they are sharing with.
Why is a clicker required for my class?
Like many instructors, yours has decided that incorporating classroom response system technology helps foster discussion among your classmates, gives your instructor a clear sense of how the class is doing, and ultimately improves comprehension and learning. These results have been confirmed repeatedly by education studies.
How long will my batteries last?
New batteries supply approximately 200 hours of use. The "Low Battery" light will flash red when you need to replace your batteries. Once this light begins flashing, you have approximately 10 hours or less of battery power remaining. Your clicker uses 3 AAA batteries. New iClicker remotes include 3 AAA batteries.
How do I change my batteries?
On the back of your iClicker is a small slot. You will need to insert a paperclip or similar device (such as the tip of a pen) to release the battery cover, allowing you to remove and replace the batteries.
What if I forget to turn off my iClicker?
iClicker remotes have two battery-saving features. As long as a remote is actively communicating with a receiver (i.e. you are using it to vote), the remote will remain on for 90 minutes after the last vote. If a remote is accidentally turned on or buttons are compressed but the remote is not communicating with a receiver (i.e.
Will my iClicker remote work in other classes?
Yes, as long as your other instructors are also using iClicker software and hardware. There are other clickers available, none of which are cross-compatible, so you will need to confirm that your other professors are also using iClicker and not another system, like the previously supported Turning Technologies clicker system.
What if I am having problems with my iClicker?
There is a standard one-year limited warranty on your clicker. If a problem occurs during class, let your instructor know immediately. They may have a loaner clicker available for you to use for the duration of the class.
Do I have to register my iClicker?
Not necessarily. Your instructor will likely tell you if they expect you to register your clicker in one of the first few classes of the term. One benefit to iClicker, you don't have to register your clicker before being able to use it.
Physical Clicker
If you’re using a physical clicker, purchase your clicker from the University Bookstore. Inside the box is a small card that has your subscription code in red text.
TurningPoint Mobile
If you’re using TurningPoint Mobile, the software that allows you to use a smartphone, tablet, or browser in place of your clicker, then you will need to purchase the license either from the University Bookstore as a scratch-off card or directly from the Turning Account page.
Create a Student Clicker Account
Open your browser and go to Blackboard at http://learn.uark.edu and log in.
