How do I drain the water from my Kenmore Elite washer?
- STEP 1: Turn off the power.
- STEP 2: Locate the drain hose and water supply hoses.
- STEP 3: Drain the washing machine of water.
- STEP 4: Remove a drain hose clog.
- STEP 5: Remove a drain pump clog.
- STEP 1: Turn off the power.
- STEP 2: Locate the drain pump filter and/or drain tube.
How do you drain a Kenmore front load washer?
How do you drain a Kenmore front load washer? Open the drain pump filter door, pull out the drain tube and remove the drain tube plug. Allow any water left in the washer to drain into the pan.
Why is my Kenmore Elite washer not draining?
Every Kenmore model has the same type of water draining system that removes water from the washer tub at various points during the wash cycle. If the control panel or water sensors become damaged, the washer may not automatically drain.
How do you clean a Kenmore Elite Elite Elite washer?
Accordingly, how do you clean a Kenmore Elite washing machine? Open the washer door and remove any clothing that is inside. Open the dispenser drawer and pour 2/3 cup of chlorine bleach. Press the "Cycle" button a few times until the "Clean Washer" cycle is selected.
How do you clean the lint trap on a Kenmore washing machine?
Lift up the lid to your Kenmore washing machine. Twist off the top of the agitator, the bar in the center of the machine that moves the laundry around. Pull out the plastic lint trap. Empty any debris in the trap and throw the debris away.
How do I force my Kenmore Elite washer to drain?
Squeeze the locking pin on the end of the drain hose that is connected to the back of the washer if you will be draining the water into a floor drain. Pull the hose away from the washer to disconnect it. The water will pour out as soon as the hose is disconnected.
How do you force a washing machine to drain?
If not, follow these steps:Step 1: Turn off the power and lay down towels. For safety, unplug the machine. ... Step 2: Locate the drain hose at the back of the washing machine. ... Step 3: Drain the water. ... Step 1: Turn off the power and lay down towels. ... Step 2: Locate the drain hose. ... Step 3: Drain the water. ... Step 4: Scrub the filter.Nov 3, 2020
How do you drain a washer with standing water?
0:162:14How to Drain the Water Out of Your Washing Machine - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd pull it out this is a coin trap the water comes in this way. And goes out this way so it'll trapMoreAnd pull it out this is a coin trap the water comes in this way. And goes out this way so it'll trap anything in there that could possibly damage the pump.
How do I get my Kenmore washer to drain and spin?
0:086:44Washer Won't Drain or Spin: Troubleshooting VMW and Direct ...YouTubeStart of suggested clipEnd of suggested clipSet the washer in the spin mode. And see what happens if the water won't drain. Turn the Machine offMoreSet the washer in the spin mode. And see what happens if the water won't drain. Turn the Machine off pull the drain hose out of the standpipe. And check for a clog at the end of the hose.
How do you position a washing machine drain hose?
In order for the drain hose on your Top Load washer to function properly, the drain must be at least 30" up from the floor and less than 8 feet high. In order for the drain hose on your Front Load washer to function properly, the drain must be at least 24" up from the floor and less than 8 feet high.
How do you manually drain an automatic washing machine?
If your washing machine has one, it will be behind a small flap in the back wall of the washer. Underneath the flap will be a small drain hose. Place a bucket underneath the drain hose then pull the stopper out of it to allow the water to drain. The water will drain slowly as it filters through.
Should there be water under the drum of my washing machine?
It is supposed to have water underneath the drum; it is only an issue if it backs up into the drum. That water gets changed every time you run the machine. It might be the rubber lining that smells and not the water below the drum.Mar 10, 2013
How do you drain a washing machine without water going everywhere?
5 Easy Steps to Get Water Out of Your WasherStep 1: Power It Down and Turn Off the Water Supply. Start by powering down your machine. ... Step 2: See If You Can Drain the Drain Hose. ... Step 3: Check Out the Drain Pump. ... Step 4: Drain the Interior Manually If Needed. ... Step 5: Know When to Call a Professional.Sep 28, 2020
Where is the drain pump on a Kenmore washer?
The drain pump is located in the lower front corner of most Kenmore front-loading machines, and the most difficult part of the job may be getting to it. If the machine doesn't have an access panel, as some do, you'll have to take the entire front panel off.
Why won't my Kenmore washer drain or spin?
If the washer won't drain, should check the drive belt. If the belt is broken or if it isn't tight on the pulleys the washer won't drain properly, if at all. If the washer won't drain the lid switch assembly might be defective. This is a very common problem.Mar 16, 2014
Why my Kenmore washer will not drain?
If the washer won't drain or is not draining properly, and the washer has a coin trap, remove the coin trap and clean it thoroughly. First, check the drain hose to determine if it is kinked, twisted, or bent. If the drain hose is bent, straighten it out. In addition, remove the drain hose and check it for obstructions.