How To Drain Intex Pool With Garden Hose
- Attach one end of your garden hose to the drain plug on your Intex pool
- Put the other end of the hose into a nearby drain or into a bucket
- Open the drain plug to allow water to start flowing out of the pool
- When the pool is empty, close the drain plug and remove the hose
How do I drain my Intex pool?
Another inexpensive way to drain your pool is by utilizing the drain valve of your Intex pool if it’s equipped with one. Just a reminder to pool owners.
Do I need help with my Intex pool pump setup?
If you need assistance for your Intex pool pump setup, then follow these instructions. The first step is to grab a Phillips screwdriver. You’ll be needing that later. Ask for assistance from one of your family members or friends. At least two people should work on your Intex pool pump setup.
How do you connect a garden hose to an Intex pool?
You can connect the female end of your garden hose to the drain connector. For other Intex pools, you may have to screw a hose adapter with your female garden hose end before you can connect it to your drain valve. This process is faster than siphoning your pool water, but not as fast compared to using a submersible pump.
How do you change a sand filter on an Intex pool?
At least two people should work on your Intex pool pump setup. Remove the sand filter and its accessories from the packaging carefully and inspect for any visible damage. Unscrew the leaf trap cover in a counter-clockwise motion in the pre-filter housing. Take out the basket and filter housing nut.
How do you drain a pool pump with an Intex pool?
0:371:39Draining the Intex UltraFrame - Quick and Easy - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd have the liner holding the pool down with the hose down at the bottom of the pool. So it's goingMoreAnd have the liner holding the pool down with the hose down at the bottom of the pool. So it's going to tree in the wireless pool pretty quickly lot quicker than the half inch hose method.
How do I drain the water from my pool pump?
Shut off the pump. Go to the back of the filter and unscrew the drain plug. Turn the pump back on and let the water run until it reaches the point where you want to drain the water out. Turn the pump back off and put the plug back into the drain plug.
How do I drain my Intex pool without the adapter?
0:001:05How to Drain a Bestway/Intex Without Garden Hose Adapter - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo now both of these hoses running draining the pool. And then I figure once the pool runs out ofMoreSo now both of these hoses running draining the pool. And then I figure once the pool runs out of most of the water. I can lift the pool towards these holes and drain it that.
How do I drain my Intex sand filter pump?
0:415:24Complete Backwash and Rinse Tutorial for Intex Sand FilterYouTubeStart of suggested clipEnd of suggested clipLet it run for about I mean anywhere from 30 seconds to a minute but really you're letting it runMoreLet it run for about I mean anywhere from 30 seconds to a minute but really you're letting it run out until the water looks.
How do you drain an above ground pool pump?
6:388:14How to DRAIN an ABOVE GROUND POOL (Even Without A Pump!)YouTubeStart of suggested clipEnd of suggested clipFloor. Turn on the pump by plugging it in and remember try not to use an extension cord at thisMoreFloor. Turn on the pump by plugging it in and remember try not to use an extension cord at this point the water should be flowing through the hose.
Where is the pool main drain valve?
The main drains are usually located on the lowest point in the pool, so the entire pool surface slants toward them. Most of the dirt and debris that sinks exits the pool through these drains.
What is the fastest way to drain an Intex pool?
0:5911:23Intex Ultra Frame Pool Draining and Take Down - YouTubeYouTubeStart of suggested clipEnd of suggested clipYour pump from the electricity. If you haven't yet done so next close both plunger valves all theMoreYour pump from the electricity. If you haven't yet done so next close both plunger valves all the way by turning them clockwise. This is a drain connector.
How long does it take to drain a pool with a garden hose?
If you can pump around 30 GPM (gallons per minute), which is also equivalent to 1800 GPH (gallons per hour), it should take you 2.78 hours or 2 hours and 46 minutes to drain your pool using a hose.
How do you drain a pool with a garden hose?
2:023:18How to quickly get a siphon going to remove water from your pool cover ...YouTubeStart of suggested clipEnd of suggested clipI'll set that in the pool. Put enough hose in there. It won't fall out now let's take this end andMoreI'll set that in the pool. Put enough hose in there. It won't fall out now let's take this end and we're gonna set it down on a low spot. And let the water flow. Right. So here we. Go.
How do you get water out of a sand filter?
Locate the drain plug at the bottom of the filter. Slowly turn the plug counter-clockwise to release any pressure. Once the pressure is released, remove the plug completely and let all of the water drain out.
How do you drain a pool filter?
0:523:30How to drain a pool with a cartridge filter - YouTubeYouTubeStart of suggested clipEnd of suggested clipAs soon as you have it opened up whether it's halfway or all the way you'll come back over turn yourMoreAs soon as you have it opened up whether it's halfway or all the way you'll come back over turn your filter pump back on and let it drain down.
What is waste on pool pump?
Waste. This setting draws water from the pool and sends it straight to the waste outlet without passing through the filter. You would use the 'Waste' setting to drain or partially drain your pool or you may use it when vacuuming if there is a lot of dirt and debris on the bottom of your pool.
How to tell if Intex pool pump is running?
The best indication that your saltwater system is running is when you hear a beep once you press the button and see a green working indicator on your control panel.
When was the Intex pool last updated?
Last Updated on May 2, 2021. Now that you’ve got the pool that you need. It’s time to start setting it up for you and your family to use. Setting up the frame and pool liner of your Intex pool is easy and pretty straightforward. You just pull everything out of the box and put things together.
How to put a 6 way valve on a machine?
Once you add the sand in, you can now put the 6-way valve on the center pipe hub top opening. Place an L-shape O-ring on the 6-way valve inlet connection and the pump motor outlet. Connect your sand filter hose between your 6-way valve inlet connection and pump motor outlet.
How to change salt water filter?
Change your saltwater system mode to “ Filter Pump “. Hold the button for the Filter Pump until “FP” flashes on your screen. Determine the amount of salt you need to add and evenly spread it inside the system. Avoid adding salt through the skimmer for you not to clog your filter.
How to connect a leaf trap to a motor water inlet?
Take out the basket and filter housing nut. Connect your pre-filter housing to the motor water inlet and in a clockwise motion you have to screw the filter housing nut into your motor water inlet. Afterward, put back the basket and leaf trap cover back to your pre-filter housing.
How long does it take to boost a pool?
For the first time setup it is required that you boost your pool’s saltwater system. You just need to press and hold the “ Boost ” button for five seconds.
Can you put pool chemicals in Intex pool pump?
Basic Tips For Intex Pool Pump Setup. Never put pool chemicals directly into the filter pump. This may damage the pump and void the warranty. Your Intex pool pump must be installed on a solid level and vibration-free base. It should be protected from the weather, moisture, flooding, and freezing temperature.
How to reduce pool fill time?
Using a hose connected to a backyard spigot, lay it into the pool and turn on the water. If you can use more than one spigot and hose simultaneously, you’ll significantly reduce your fill time.
Can you drain a pool on a sunny day?
While it might sound like a good idea to do a drain on a sunny day, that’s not actually ideal. Pools are designed to be filled with water. Having them sit empty in the hot sun can dry out the finish/liner and lead to damage.
Can you use a pool brush without a skimmer net?
If your swimming pool goes years without being thoroughly scrubbed, it’ll catch up with you eventually. Yes, you should still be following a maintenance schedule using your skimmer net, pool brush, and vacuum, but the presence of TDS in the water will compound as time goes on, staining the finish.
