Here is a step by step guide to cutting wood with your Cricut Explore Air 2 machine:
- Design your design in Design Space. MAKE the design.
- Set the dial on your machine to CUSTOM and change the CUSTOM MATERIAL setting to 331 pressure and somewhere between 4-8 cuts
- Place your material on a stronggrip mat. Tape it on all 4 sides.
- Load the mat into the machine and hit GO.
- Once done, examine the cut. ...
- Remove the mat from the machine. ...
Can the Cricut cut basswood?
What is Basswood? Basswood is a type of light-colored hardwood that is really great for crafting. While many people carve blocks of basswood, the Cricut can cut basswood sheets. Basswood has a smooth, even wood grain, with no resin or pitch to interfere with the Knife Blade.
Can the Cricut explore air cut wood?
For the past little while, I have been experimenting with cutting wood using my Cricut. While the Cricut Explore Air isn’t technically the best for cutting wood, it is possible, and after a lot (and I mean a lot), of trial and error, I think I finally figured out the best ways to cut balsa wood and basswood!
How do you cut basswood?
When cutting, use a StrongGrip mat, and make sure to tape down all four edges. If your mat is not new, use a brayer to really press your basswood into the adhesive on the mat. You don’t want it shifting during cutting! Make sure your piece is no wider than 11″ wide.
Can you use balsa wood in a Cricut?
Let’s start with Balsa Wood! If you aren’t familiar with balsa wood, it’s a type of wood that feels rather flexible. It almost feels like styrofoam. It’s great when you need a material that’s a little stiffer, and I know a lot of people who have enjoyed using it for different Cricut crafing projects.
How do I cut balsa wood in Cricut explore AIR 2?
2:563:56How to Cut Wood with Cricut Explore Air and Cricut Maker - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo the fine point blade at 300 pressure and five times cut I did it three times cut the first time.MoreSo the fine point blade at 300 pressure and five times cut I did it three times cut the first time. And I was able to pop it out to be easily.
What Cricut setting for basswood?
The Cricut Maker can cut materials up to 2.4mm or 3/32 of an inch. Note: Cricut basswood is 1/16. If you are buying other basswood make sure it is either 1/16 or 1/32 since these are the basswood settings in design space.Nov 19, 2020
Can a Cricut explore cut basswood?
The Knife Blade is exclusive to the Cricut Maker Adaptive Tool System. Because of its cutting depth you can cut out things that have more dimension. It will slice through thicker materials such as basswood, balsa wood, leather, mat board, and chipboard with ease and precision.Jan 20, 2020
Why won't my Cricut maker let me cut basswood?
First, you will need to use a StrongGrip cutting mat (the purple one). The Standard Grip mat is just not strong enough, so you will need the Strong Grip mat to cut wood. When you are cutting thick materials on your Cricut Maker, the knife blade is a must. You won't be able to cut wood without this.Jun 25, 2019
Can I cut basswood with a utility knife?
Very thin basswood can be cut with an x-acto knife, though it is difficult. But if the basswood is thick enough that you can't easily flex it, you'll need power tools.Aug 8, 2006
What size basswood can Cricut maker cut?
1/32″Basswood: Basswood is a stronger craft wood. It is heavier and sturdier than balsa. It's generally easier to paint and stain because it holds the products better and isn't as fragile to handle. The Cricut Maker can cut it at 1/32″ and 1/16″ thick with the Knife Blade.Mar 6, 2019
How do you cut basswood with Cricut?
0:539:11Cricut Knife Blade - Cutting Bass wood and more! - YouTubeYouTubeStart of suggested clipEnd of suggested clipYou use the rotary blade it does take a little bit of time. And you want to make sure that thatMoreYou use the rotary blade it does take a little bit of time. And you want to make sure that that stays stuck.
How do you cut basswood?
9:0327:52how to cut basswood with knife blade on cricut maker + lessons i learned!YouTubeStart of suggested clipEnd of suggested clipOkay so the basswood. Comes in four sheets. So i have four at that 12 inch by six inch. And it'sMoreOkay so the basswood. Comes in four sheets. So i have four at that 12 inch by six inch. And it's really really easy to trim with a knife blade.
Can you use basswood in Cricut maker?
Cricut Basswood is specifically developed for optimal results with Cricut Maker and Knife Blade. What do I look for when purchasing materials? If the wood has a knot, cuts should be positioned in a way that blade will not go over the knot.
How wide should basswood be on Cricut?
Wood should be no wider than 11". If using Cricut 12" x 6" basswood, place it on the mat so the length runs down the mat (vertically) rather than across (horizontally). Then rotate your design on the project preview screen as needed to align with the wood on the mat.
What to do if you cut a piece but didn't?
If there are pieces that should have cut but didn’t, flip the piece over and use a craft knife to gently follow the cuts until the piece is free. If a piece is not completely cut, do not try to pop it out. Pushing on the piece could cause it to break.
How to make a wood sanding board?
Handle the wood cautiously as it can be very fragile. Protect your work surface. Cut material to the size needed for project using a craft knife and a safety ruler. Make multiple passes with the craft knife as needed. Ensure the piece of wood is no wider than 11" . Remove any stickers or packaging from the wood.
What to do if your machine stops cutting?
If the machine cannot move past this point, there may be imperfections in the material. Remove material from your machine, discard, and begin the cut again with a new piece of material .
Can composite wood be cut over?
If using composite pieces, you may encounter inconsistent cutting over the seam, which may cause damage to the blade. This is because the glue is often harder than the wood itself. Pay attention to the color and grain of the wood; make sure you can buy enough of similar appearance to complete your project.
Is basswood a good wood for a crates?
Denser than balsa wood, basswood has a smooth, even wood grain – an ideal surface for clean cuts to craft models, toys, puzzles, or even small gift crates. It can be painted and stained easily without having to seal it first.
What thickness of basswood is used for cricut?
Right now, the Cricut has qualified 1/32″ and 1/16″ basswood, so make sure you’re looking at those thicknesses. You also want a uniform sheet, with no seams. A glued piece of basswood has a higher potential of jamming your Cricut.
What is basswood wood?
What is Basswood? Basswood is a type of light-colored hardwood that is really great for crafting. While many people carve blocks of basswood, the Cricut can cut basswood sheets. Basswood has a smooth, even wood grain, with no resin or pitch to interfere with the Knife Blade.
Is basswood good for Cricut?
Basswood is a little tough to find, particularly in sheet sizes that are good for the Cricut. The other concern is that it’s always good to look at your basswood in person, so you can check it for defects and seams, like I mentioned above.
Can you cut corners in Cricut Design Space?
If not, Cricut Design Space will give you the option to do one more pass. If you do that and there’s still small corners or parts that haven’t cut all the way through, but the majority has, then remove your mat, release your project, and use a craft knife to cut the last little bits in the corners.
How long does it take to cut basswood on a cricut?
This can happen with cuts that take over an hour.
How thick of wood can a Cricut Maker cut?
How thick of a wood can the Cricut Maker cut? The Cricut Maker can cut materials up to 2.4mm or 3/32 of an inch. Note: Cricut basswood is 1/16. If you are buying other basswood make sure it is either 1/16 or 1/32 since these are the basswood settings in design space.
What is the difference between a Cricut and a Cricut Maker?
The main difference between a Cricut Maker and other Cricut machines is that it can cut thicker material like basswood, chipboard, veneer, felt, leather, etc. Want to make a project with basswood?
How to load a knife blade?
To load the knife blade remove the plastic cap over the blade and open slot b on your maker. Place the blade in so the flat open part of the gear is against the machine. Now if you haven’t calibrated your knife blade follow these instructions here.
Is basswood a good wood?
Basswood is a denser wood than balsa wood, it has a smooth, even wood grain – an ideal surface for clean cuts to craft models, toys, puzzles, or even small gift crates. It can be painted and stained easily without having to seal it first.
Can you cut basswood with an exacto knife?
If there is resistance you may need the assistance of an exacto knife. If your knife blade is dull and needs to replaced it may not cut all the way through your basswood. Not to worry trace along the likes with your exacto knife. I suggest doing this on a self healing cutting mat.
Cut Wood with Cricut Explore and Cricut Maker
Please keep in mind that neither of these woods are on the official “approved” list from Cricut, so you are cutting them at your own risk. However, I did not have any issues with them, and I cut a lot from these materials recently.
How to Cut Basswood
I wasn’t planning on cutting basswood until I stumbled into it when I had gone back to the store to get more balsawood.
WELCOME TO CLARKS CONDENSED
Clarks Condensed provides uplifting and motivating information to share the joys of home and family living through parenting and pregnancy advice, easy DIY tutorials, recipes, and more – all with a frugal twist. Read more...
