How to Change a Toilet Drain to a Shower Drain Unscrew the old toilet flange and pry it loose. … Join the 4-inch to 2-inch PVC reducer bushing to the sewer pipe with a 4-inch rubber coupling, if the pipe is metal or non-PVC. … Temporarily mount a 2-inch PVC trap under the shower drain location with a pipe hanger.
Full Answer
How to convert a shower to a toilet?
How to Convert a Shower to a Toilet 1 Demolition. The shower pan, regardless if it is plastic or tiled, has to be removed to expose the drain, and that means also removing the walls because all pans are ... 2 Capping Plumbing. ... 3 Plumbing the Toilet. ... 4 Reinstall Walls and Floors. ... 5 Setting the Toilet. ...
Can you put a toilet drain pipe in a shower?
This means that you are going to have to replace the shower drainpipe, so it is big enough to fit the toilet. If, for some reason, the previous plumbers put a 3” drainpipe in the shower, then you can skip this step; otherwise, you have some work to do.
How do you attach a shower drain to the floor?
Attach the pipe to the floor joists with pipe straps using 1 1/2 inch screws, holding the pipe at a 1/4-inch drop per foot of run to allow the water to gravity-flow through drain properly. Measure the distance from the top of the trap to the expected floor of the shower.
What size PVC pipe do I need for a shower drain?
The 4-inch PVC of the toilet drain will need to be reduced to 2 inches for the shower, so you unless you have access beneath the bathroom via a basement or crawl space, you will need to cut away some of the subflooring to make the plumbing changes beneath the floor.
How to Convert a Floor Drain to a Shower Drain?- 6 steps Guide
Installing a shower is very easy and it’ll save you a lot of money. Your floor drain will be useful again after the conversion.
FAQs
Answer: Shower drains cost around $50-60 with additional pipe fittings. Extra charges are added if you take help from a professional for installation.
Final Words
Hopefully, now you know how to convert floor drain to shower drain. Remember to replace the drainpipe or else, the water won’t pass through the drain properly.
How much should a horizontal drain pipe slope?
Horizontal pipes should slope 1/4 inch per linear foot from the flange to the vertical drain pipe. Use the existing 2-inch pipe as a guideline for how much length and what connectors you need, then buy 3-inch material and install it. PVP pipe can be cut with a hacksaw and glued together with connectors.
Can you convert a shower to a toilet?
Showers and toilets have one thing in common: plumbing. And while you can’t always interchange things in a home when working on a remodel project , you can convert your shower into an area for a toilet simply by doing some demolition and remodel work, along with replacing the plumbing. After that, you can move the new shower anywhere you want ...
What tools do you need to demolish a bathroom?
Tools. Hammer or sledgehammer: you are going to have to open some walls. The bigger the hammer, the quicker you can get the job done. Pry bar: this will help with the demolition. Goggles: you are going to be causing debris to fly around your bathroom, either knocking down walls, cutting pipe, or pulling apart floors.
How to run PEX pipe from old water source?
Instead of running the PEX directly from the old water source, you need to use the reciprocating saw to cut out a section of the existing pipe. Once you have removed the section of the pipe , add a t-connector and attach a vertical pipe, which has a cap and a connector for the toilet supply line.
Why do you need a wye fitting for a toilet?
this will allow you to run straight pipe at the right pitch from the toilet. the wye fitting is needed so you can attach the new drainpipe to the stack.
Can you run PEX from a shower?
If there is some issue with using the shower’s cold water line, you could also run the PEX from the pipe that used to supply water to the toilet at its old location. You will obviously need to run a longer pipe, so make sure you run it through the joists and support it where necessary.
Can you connect a shower drain to a toilet trap arm?
In some areas, to be in code, you cannot connect shower or sink drains to the toilet trap arm. This means they have to be downstream of where the toilet connects to the main stack. When you run your new line, make sure it is above the other drain lines.
Can you put a toilet in a shower?
The simple answer is yes, you can put a toilet where a shower was, but the move doesn’t come without its issues. This isn’t a simple DIY job. You are going to have to remove at least one wall and, hopefully, only a small portion of the floor.
Do toilets need water?
Toilets need a water supply and, fortunately, you are putting your toilet right next to a water supply. You will still need to do a little plumbing but nothing major.
