How do I connect my led aura to my phone?
- Tap on Settings.
- Select “General”
- Tap on “Bluetooth”
- Flip the On/Off button to toggle Bluetooth on or off.
- Close out of Settings and you're on your way.
...
Download the Aura Pro app to your Smartphone Device, ensure your Bluetooth is turn ON (see below on see how).
- Tap on Settings.
- Select “General”
- Tap on “Bluetooth”
- Flip the On/Off button to toggle Bluetooth on or off.
- Close out of Settings and you're on your way.
Are Aura LED lights Bluetooth?
Product Description. Our AURA PRO Lighting Kits put you in control of the mood and ambiance. WE NOW OFFER OUR BLUETOOTH CONTROL BOX! If you have AURA Original, you can now upgrade to AURA Pro LED Bluetooth App Enabled Phone Controller and Box.
Can you hook up your LED lights to your phone?
You can remotely control your led tape lights by your smartphone APP. You can also easily change brightness, color, mode, speed and as much as 16 colors.
Is there an app for Aura LED lights?
auraLED is an APP to control LED RGB strip, to control the brightness and color.27-Aug-2019
How do you set up an LED aura?
0:292:20How to INSTALL AURA LED Interior Lighting Kit using the Simple MethodYouTubeStart of suggested clipEnd of suggested clipStep 3 remove the sticker backing along the or LED strips. And begin placing the strip's underneathMoreStep 3 remove the sticker backing along the or LED strips. And begin placing the strip's underneath your vehicle's seats dashboard side panels or any other location. You want to light. Up.
How do you connect LED lights to Bluetooth?
0:264:18Feican Smart LED Light Strip Review - Bluetooth LED RGB Strip - YouTubeYouTubeStart of suggested clipEnd of suggested clipCheck out what else is in the box before we open so Manuel here does find the Bluetooth controllerMoreCheck out what else is in the box before we open so Manuel here does find the Bluetooth controller app remote. Control lots of buttons nice. And then you have the power adapters.
How can I control my lights with my phone?
The Belkin WeMo Light Switch is among the most popular on the market. The Wi-Fi enabled device allows you to turn lights on and off from anywhere in the world using a mobile device (Android and iOS). The $50 Belkin WeMo Insight Switch is also a good choice and one that works with Amazon Alexa.10-Jan-2017
Can you connect Aura LED lights?
Answer: Yes, you can add it the AURA PRO control box led strips kits to expand your pre-existing kit. Failed to get answers.
How do you set up an aura led remote?
On the remote control, press a device key once (i.e., TV, PVR, DVD, CBL/SAT, AUD, or VCR). Press and hold SET until the LED (red light) blinks twice, then release SET. Use the "Manufacturer's Codes" to locate the type of device and brand name and then enter the first four-digit code for your device.09-Nov-2016
How do you pair Aura LED strips?
0:202:45How to Cut and Connect LED Light Strips. - YouTubeYouTubeStart of suggested clipEnd of suggested clipRemove the plastic to reveal the circuits and make sure you remove enough to expose the letters. TooMoreRemove the plastic to reveal the circuits and make sure you remove enough to expose the letters. Too. You can create a new end or connect two lines. Directly. Now in a pinch.
Why won't my aura LED lights turn on?
Bad Pin Connection – If your LED strip light fails to turn on at all, then check your pin connections. Most likely, the pin is not inserted correctly. In rare cases, the pin is faulty. ... If your RGB strip lights won't change colors try flipping your strip light around and reconnecting it.17-Sept-2017
What is a 4 pin RGB header?
4-Pin RGB Header (12V) This header has the 4 pins used for red, blue, green and ground. So, there is no data stream in this setup. When you send information through the blue pin (0 = off, 1 = on), you either turn that color on or off. For you, this means that every LED on the same strip or circuit will be the same.07-Oct-2020
How do I reset my LED controller?
Insert a paper clip, or a similar sized object, into the reset hole on the controller (depicted below). Using the paper clip, press and hold the reset button inside the reset hole for eight (8) seconds. If done successfully, the light strip will flash five times then cycle through the colors blue, green and red.
How to turn on Bluetooth on Aura Pro?
Tap on Settings. Select “General”. Tap on “Bluetooth”. Flip the On/Off button to toggle Bluetooth on or off. Close out of Settings and you're on your way. 3.) Once the Bluetooth setting is ON, next find the Aura Pro App on your smart phone device, the app should look this which means you downloaded the correct application for the Aura Pro LED kit. ...
How to connect OPT7 to Aura Pro?
Download the Aura Pro app to your Smartphone Device, ensure your Bluetooth is turn ON (see below on see how). Tap on Settings. Select “General”. Tap on “Bluetooth”.