how do i clean my garrison water cooler

How do I clean my garrison water cooler?

• Unplug the power cord from the electrical outlet.
• Remove the water bottle.
• Remove the water guard.
• Clean the drip guard.
• Disinfect the reservoir.
• Rinse the reservoir.
• Replace parts and plug in.
• Clean the water drip tray.

Full Answer

How do you clean a 5 gallon water cooler?

Also, how do you clean a 5 gallon water cooler? You can either use a chemical disinfectant or an all-natural solution to clean your water cooler.

Can I use mild soap to clean my water cooler?

We don’t recommend mild soap or other chemical cleaners as they may impact the taste of your bottled water. To make a gentle bleach solution for disinfecting your water cooler, mix 1 gallon of tap water with 1 tablespoon of unscented chlorine bleach.

How much vinegar do you put in a water cooler?

If you prefer to use vinegar to clean your water cooler, use plain, white vinegar. Add 1 quart of vinegar to a bucket and fill with 3 quarts of warm water.

How do I Clean my Dog's Water Cooler?

Remove the bottle from your cooler (it’s best to do this when the bottle is empty) and drain reservoir thru the cold water (blue) faucet into a bucket and throw that away or give it to your dog. (If there is ice in the reservoir, allow it to melt and then drain. Add hot water to speed up this process.)

How do I clean my garrison bottom loading water cooler?

How to Clean a Bottom-Loading Water DispenserUnplug the power cord from the electrical outlet. ... Remove the water bottle. ... Mix your cleaning solution in the water bottle. ... Hook up the cleaning bottle. ... Drain the reservoir. ... Rinse the reservoir. ... Replace parts and plug in. ... Clean the water drip tray.

How do I clean and sanitize my water cooler?

Mix 1 cup of distilled white vinegar with 3 cups of hot water and pour this into the reservoir of the cooler. (Gloves may come in handy here, especially if you have sensitive skin.) Wipe the inside of the reservoir clean using this solution and a microfiber cloth.

How do you clean dust out of a water cooler?

2:394:48How to Clean an AIO (All-In-One) CPU Cooler - YouTubeYouTubeStart of suggested clipEnd of suggested clipIf you look through it you can see lots of small holes some which are blocked with dust a good wayMoreIf you look through it you can see lots of small holes some which are blocked with dust a good way to blow out the dust is to use a can of compressed. Air.

Can I run vinegar through my water cooler?

A vinegar cleaning solution is a natural and safe way to disinfect a water cooler. Mix a vinegar solution from 1 cup of distilled white vinegar and 3 cups of hot water (or any 1:3 ratio) and fill the cooler reservoir. Use a gentle scrub brush with a long handle to scrub the inside of the reservoir.

Does a water cooler need to be cleaned?

The U.S. Department of Energy recommends cleaning the cooler with every change of the bottle, or every six weeks, whichever arrives first. Keeping the water clean is the most important part of maintaining your cooler. Fortunately, washing your dispenser requires only some time, water, and either bleach or vinegar.

Can you get sick from a water cooler?

Contaminated workplace water is not only unappetizing, but it can also pose a health risk to coworkers. Certain species of bacteria that are common in bottled water cooler dispensers can cause a person to contract Legionnaires' disease, which causes flu-like symptoms and can eventually turn into pneumonia.

How do you deep clean a water dispenser?

1:403:08How to Clean a Water Dispenser – ReadyRefresh by Nestlé - YouTubeYouTubeStart of suggested clipEnd of suggested clipCompletely through the cold water spigot replace the baffle into the hole in the base of theMoreCompletely through the cold water spigot replace the baffle into the hole in the base of the reservoir reinsert. The air filter into the no spill adapter. And place back on the dispenser.

How often should you clean your water cooler?

Generally, we recommend that you clean and sanitize your water cooler every 6-12 months. Cleaning a bottled water cooler is really pretty easy. Please read ALL the instructions before starting to clean your cooler. Make sure you follow the necessary precautions for a Hot & Cold Cooler.

How do you descale water dispenser?

Descaling using vinegar or citric acidYou can use ordinary vinegar (white or malt) or citric acid to descale your HotCup water dispenser. ... If you are using vinegar, make up a solution of 1 cup vinegar to 1 cup of water. ... Pour the solution into the tank, close the lid and allow it to stand for 1 hour.More items...

How do you clean a water cooler with baking soda?

Mix one gallon of warm water with two tablespoons of baking soda or distilled vinegar. Pour directly into the reservoir. Thoroughly wash the reservoir with a clean cloth or sponge. Let the solution sit for five minutes before draining it from the reservoir through the cold spigot.

Can I use apple cider vinegar to clean water dispenser?

Heat some white or apple-cider vinegar until warm (NOT boiling) and wipe down the outer ice/ water dispenser surface. Next, clean the dispenser water tip by using a small brush and vinegar to poke up in there, and wipe inside and outside.

Why does the water in my water cooler taste funny?

Dirty Water Tank Left to itself, a water cooler can quickly become a breeding ground for mold and bacteria. In fact, it's estimated that 28 percent of water dispensers contain some sort of contaminant. They cause bad smells, rotten tastes, and sometimes even illness.

What to use to clean a hot and cold cooler?

Lint-free towel or lint-free paper towels. Clean container or bucket that can hold a gallon or two of water. Unscented household bleach (just a tiny bit!) A small cork or plug if you have a hot & cold cooler This is a CRITICAL piece that you need to clean your hot/cold cooler. For a room temperature and cold cooler, a cork or plug is not needed.

How to get chlorine taste out of water?

Place a bottle on the cooler and drain two cups of water from each faucet (hot, room temp, and cold). You shouldn’t have any chlorine taste. If you do, keep draining more water until the taste disappears. Plug the cooler back in – it’ll take thirty minutes of so before the water is hot and/or cold!

Why do you have to use bleach in a hot water tank?

The reason you have to do this is to prevent sanitizer from getting into your hot tank. The hot tank sanitizes itself since it’s very hot!! If bleach gets into the hot tank, your hot water will taste like chlorine for many days to follow.

How long to let a sanitizer sit?

Allow to sit for at least 3 minutes and then rinse profusely with clean bottled water – like about a gallon and set aside to dry. Now let’s get rid of the sanitizing solution. Fill reservoir full (all the way to the top) of fresh bottled water and completely drain that water thru the cold faucet.

Where is the hot water hole in a water cooler?

Once the baffle is removed, you’ll see two holes in the bottom of the reservoir leading to the faucets. In a hot/cold water cooler, the hole in the center is the hot water hole. That’s the one you need to plug with a cork or plug.

How to get ice out of a dog bottle?

Remove the bottle from your cooler (it’s best to do this when the bottle is empty) and drain reservoir thru the cold water (blue) faucet into a bucket and throw that away or give it to your dog. (If there is ice in the reservoir, allow it to melt and then drain. Add hot water to speed up this process.)

Make sure your drinking water is clean and fresh by keeping your water cooler pristine

Water coolers provide fresh filtered drinking water at the press of a button. Since they’re a common fixture in offices, gyms, and homes, you may use one of these convenient dispensers on a near-daily basis. But have you thought about what goes into keeping them clean? Water coolers create a moist environment that can harbor mold, grime, and germs.

BEFORE YOU BEGIN

A water jug cooler should be cleaned every time the bottle is changed or every 6 weeks, whichever comes first. Keep in mind that it’s easier to work with an empty water gallon dispenser than a full one, so it’s best to plan for cleaning when it’s time for a bottle change.

STEP 1: Unplug the cooler and remove the water bottle

Before we jump into how to clean a water dispenser, there’s one important step to remember: always unplug the cooler before you start cleaning. This ensures that the water cooler is safe to clean, even in the case of accidental spills. Once unplugged, remove the empty water bottle and drain any remaining water using the drain plug or spigots.

STEP 2: Remove and wash the water guard and baffle with dish soap and warm water

To properly clean the inside of the water cooler, you’ll need to remove the water guard and baffle. If they don’t come out easily, follow the manufacturer’s directions to remove these parts without damaging them. Wash these parts with mild dish soap and warm water. If you prefer, you can clean them with a non-abrasive sponge.

STEP 3: Mix up a vinegar cleaning solution and pour it into the water cooler reservoir

A vinegar cleaning solution is a natural and safe way to disinfect a water cooler. Mix a vinegar solution from 1 cup of distilled white vinegar and 3 cups of hot water (or any 1:3 ratio) and fill the cooler reservoir. Use a gentle scrub brush with a long handle to scrub the inside of the reservoir.

STEP 4: Drain, scrub, and rinse the reservoir

With a large enough bucket under the taps, drain the remainder of the vinegar cleaning solution from the reservoir. Refill the reservoir with clean water and rinse thoroughly to remove the vinegar solution. Use the scrub brush again to ensure that surfaces are squeaky-clean and remove any leftover cleaning solution.

STEP 6: Wipe down the outside of the water cooler

The outside of the water cooler is also a high-touch surface that can collect germs, dirt, and dust. Using a soft cloth, wipe down the outside of the water jug cooler. For a better clean, add a small amount of soapy water or non-toxic cleaner (like the vinegar cleaning solution) to wipe down the exterior.

Why do coolers need regular cleaning?

Even coolers that promise to be self-cleaning need regular maintenance to prevent bacteria build-up and to remove mineral deposits from the interior working parts. The exterior also needs regular cleaning to remove fingerprints and the bacteria left by hands on the controls.

How to clean a drip tray on a grill?

While the cleaning solution is sitting in the reservoir, clean the drip tray. If the tray is removable, take it to the sink and use a bit of dishwashing liquid to clean away any residue from the grill and tray. Rinse well and dry with a microfiber cloth .

How much water to add to a bucket of distilled white vinegar?

Stir to mix well. Distilled White Vinegar Solution: Add one gallon of water to a bucket and pour in five and one-third cups of distilled white vinegar. Stir to mix well. The Spruce / Almar Creative.

Is a water cooler more efficient than a plastic bottle?

A water cooler is usually more cost-effective than individual plastic bottles; it dispenses the exact amount of water you want; and reduces the amount of plastic waste that should be recycled. There are three basic types of home water coolers: Top-loading models: The water jug sits upside-down on top of the cooler and water is dispensed by gravity. ...

How to clean a water cooler?

Mix 1 cup of white vinegar and 3 cups of warm water and pour this into the cooler's reservoir. Gloves may come in use here, especially if you've got sensitive skin.) Wipe the interior of the reservoir clean with a microfiber cloth and this option. Drain the cleaning solution in your bucket from the reservoir.

How to clean a plastic baffle?

Lift the baffle, which is a metal or plastic disc. Wash the water guard or the baffle with a mix of warm water and gentle dish washing liquid, just as you'd wash dishes by hand . Rinse the water guard to make sure all the soap is removed and place them aside on a clean and dry microfiber cloth. Mix 1 cup of white vinegar and 3 cups ...

Can bleach and vinegar be mixed?

Bleach and vinegar are two cleaners that should never be mixed, as they produce toxic chlorine gas when mixed. It is always a good idea to follow the sanitization guidelines provided in your manufacturer's manual or ask your water service provider if they offer sanitization services.

Can a water dispenser get dirty?

You wouldn't imagine that something as apparently harmless as a water dispenser could get dirty... but it could. In reality, a water dispenser has to be cleaned and even sanitized regularly. (After all, microbes love moisture, and there is loads of that in your water cooler .)

Is sanitizing a water cooler bad for you?

Additionally, sanitizing a water cooler can be challenging and doing it in a wrong way could result in your water tasting odd or being toxic to your health if sanitizer resides in it for too long. Many people often sanitize their water coolers using bleach.

How to clean a water cooler?

1. Unplug the water cooler from the wall, and remove the bottle. Make sure there's no other electronics plugged into the same outlet, or near the area where you've chose n to clean your water cooler. This avoids any possibility, however small, of water meeting live electricity. 2.

How to get rid of the smell of vinegar?

To ease the scent of the vinegar, you can choose to add a tablespoon or two of lemon juice. Mix in one part white vinegar for every three parts water. So if using a gallon of water, use 1/3 of a gallon (5 1/3 cups) of white vinegar. If including the lemon juice, add it after mixing the water and vinegar.

How to clean clothes with bleach?

1. Pour one gallon of water into a bucket. This step is the same whether you're using a bleach or a vinegar solution. Consider a bucket with a handle, or one that is easy to manage. It's best if none of the bleach solution spills out of the container and onto the floor, or your clothes. 2.