It's Easy to Change a Maytag Refrigerator Light Bulb
- Grasp the shield with one hand and put equal pressure on its two sides to release the snap-on tabs from the frame.
- Pull the shield down or slide it toward you to remove it.
- Replace the shield by reversing the procedure for taking it off.
Full Answer
How do you change a light bulb in a Maytag refrigerator?
Unplug your Maytag refrigerator's power cord. Squeeze in on the clips on the side of cover to free it from your refrigerator's wall. Turn the light bulb counterclockwise to unscrew it from its holder. Place the new light bulb in its holder. Plug in your Maytag refrigerator's power cord and open the refrigerator's door.
Is your Maytag refrigerator freezer freezer light not working?
That would probably be a waste of time because LEDs seldom burn out, and the problem with the lighting is usually something else. If your Maytag refrigerator freezer light isn't working or the light in the refrigerator compartment has gone dark, Maytag offers simple replacement instructions on its website, and they're exactly what you'd expect:
How do I replace the LED bulb in my freezer?
A replacement LED bulb can be purchased from an authorized dealer. Replace the light shield. Plug in freezer or reconnect power. This part can be ordered at our Purchase Genuine Parts site.
How do I remove the lens on my Maytag refrigerator?
Remove the lens cover using a small screwdriver. Insert the screwdriver in the front centre of the lens cover and gently lever down. Likewise, how do I reset my Maytag refrigerator?
How do you change the lightbulb in a Maytag freezer?
To Change the Light Bulb:Unplug refrigerator or disconnect power.Remove light shield when applicable.Remove light bulb and replace with one of the same size, shape and wattage.Replace light shield when applicable.Plug in refrigerator or reconnect power.
Can you replace freezer light bulb?
Before replacing the light bulb check to see if the light bulb is loose, tighten if needed. If the bulb needs to be replaced, be sure to replace with an appliance bulb of same size, shape and wattage (no greater than 40 watts). Not all appliance bulbs will fit your freezer.
How do you remove a freezer light bulb?
Unplug or disconnect power to the refrigerator. Lightly spray a lubricant such as WD-40® at the base of the bulb. Allow it to set for a few minutes and reach crevices. Use a damp rag or leather glove and gently twist the bulb counter clockwise to remove it.
How do you replace LED bulbs in the freezer?
0:372:05How to replace Freezer LED Light Module part # W11483116 on your ...YouTubeStart of suggested clipEnd of suggested clipOut then disconnect the electrical. Connector you may need to use a tool to depress the locking tabMoreOut then disconnect the electrical. Connector you may need to use a tool to depress the locking tab when shopping for a new led.
Why is my freezer light not working?
If your refrigerator light is not coming on, it may be that the bulb has reached the end of its lifespan and has burned out. Check the bulb to see if it has a dark area in the bulb or has a broken and loose filament. When you shake the bulb, you may hear a rattling noise if the filament inside is damaged.
How do you remove the light cover on a Whirlpool freezer?
0:201:52Whirlpool Refrigerator LED Light Replacement #W10289592YouTubeStart of suggested clipEnd of suggested clipUnplug the power cord. Use a Phillips head screwdriver to remove the screws securing the light.MoreUnplug the power cord. Use a Phillips head screwdriver to remove the screws securing the light. Cover. Pull down on the cover to release it. Now depress the tabs to release the old LED light module.
How do you remove the light cover on a Maytag refrigerator?
Grasp the shield with one hand and put equal pressure on its two sides to release the snap-on tabs from the frame. Pull the shield down or slide it toward you to remove it. Replace the shield by reversing the procedure for taking it off.
Do you need a special light bulb for a freezer?
It's also important to use bulbs with the recommended wattage and the proper base size. Ovens, microwave ovens, ranges, range hoods, refrigerators, freezers and dryers are among the appliances that require these special bulbs.
How do I change the bulb in my Whirlpool bottom freezer?
1:223:37Whirlpool Refrigerator Freezer Replace Light Socket #W10134764YouTubeStart of suggested clipEnd of suggested clipThe socket down to detach it. And disconnect the wires install the new freezer light socket by firstMoreThe socket down to detach it. And disconnect the wires install the new freezer light socket by first connecting the wires to the appropriate terminals. Now align the socket tab in the housing.
Why is my Whirlpool freezer light not working?
If your refrigerator or freezer compartment has a traditional light bulb check to see if the light bulb is loose in the socket and tighten if needed. If the bulb needs to be replaced, be sure to replace it with an appliance bulb of the same size, shape, and wattage (no greater than 40 watts).
How do I change the bottom light bulb on a Kenmore freezer?
1:543:14How To: LG/Kenmore Light Bulb 6912JK2002E - YouTubeYouTubeStart of suggested clipEnd of suggested clipUnscrew the bulb turning it counterclockwise. You place it with a new one and screw it in clockwiseMoreUnscrew the bulb turning it counterclockwise. You place it with a new one and screw it in clockwise greased out the light lens insert the front tabs into the cutouts. And lock the rear tabs.
How do I replace the LED light on my Samsung freezer?
0:231:14Samsung Refrigerator Freezer LED Light Cover Replacement DA63 ...YouTubeStart of suggested clipEnd of suggested clipCover. Free to install the new freezer led light cover align the cover on the bottom of the door andMoreCover. Free to install the new freezer led light cover align the cover on the bottom of the door and snap it into position plug the power cord back in. And the refrigerator should be ready.
What to do if Maytag refrigerator light isn't working?
If your Maytag refrigerator freezer light isn't working or the light in the refrigerator compartment has gone dark, Maytag offers simple replacement instructions on its website, and they're exactly what you'd expect: Unplug the appliance. Remove the plastic light shield, if there's one.
How many watts does a Maytag refrigerator use?
Some Maytag refrigerators take standard 40-watt appliance bulbs, which have the same shape as regular incandescent bulbs but are a little smaller. Some are frosted and some are clear, and it doesn't matter which you choose as long as the wattage is the same or less than that of the bulb you're replacing. A higher wattage bulb generates more heat ...
Why won't my light bulb work?
The reason a light bulb doesn't work isn't always that it's defective, and if that's true, changing it won't have any effect. If the refrigerator has LED lighting that isn't working, you can't change the individual LEDs unless you're ready to disassemble the appliance.
How to remove a snap on shield?
Grasp the shield with one hand and put equal pressure on its two sides to release the snap-on tabs from the frame. Pull the shield down or slide it toward you to remove it . Replace the shield by reversing the procedure for taking it off. Advertisement.
Can you use LED bulbs with less wattage?
You can use an LED or CFL bulb to save energy, but it has to be the same size as the one you're replacing or it won't fit. Wattage isn't as important because both types of bulbs use less power than incandescents.
How to Check or Replace the Light Bulb in your Maytag Freezer
Before replacing the light bulb check to see if the light bulb is loose, tighten if needed. If the bulb needs to be replaced, be sure to replace with an appliance bulb of same size, shape and wattage (no greater than 40 watts). Not all appliance bulbs will fit your freezer. For instructions on how to Change the Light Bulb see your Owner's Manual.
To replace the light bulb (on some models)
NOTE: Not all appliance bulbs will fit your freezer. Be sure to replace the bulb with an appliance bulb of the same size, shape, and wattage. Please review your Owner's Manual for specific instructions for your model.
Where is the light bulb on a GE freezer?
Where Is the Light Bulb in a GE Freezer? The light bulb of a GE freezer is usually located on the roof or the rear wall of the freezer. And it is always enclosed in a light shield. The location of the freezer light bulb may vary depending on the refrigerator’s model.
How to remove light bulb cover on GE refrigerator?
To remove the light bulb cover in a GE refrigerator, do the following: 1. Locate the Light Bulb Cover. The light bulb cover is located where the light bulb is and a GE refrigerator has four bulbs. One is in the freezer, two in the fresh food compartment, and another in the water dispenser.
How to remove a light shield?
Remove the Light Cover. Empty and remove the basket directly beneath the light cover for easy access to the shield. Then, firmly hold the light cover at the upper front edge and pull towards you until the retaining tabs are released. Then, remove the shield by sliding it off.