Stanley 10-788 Utility Knife, Quick Blade Change Contractor-grade utility knife makes changing blades easy because no tools are required. Simply push the blade-release button and slide out the old blade. Swing-out blade storage is built into the handle.
Full Answer
How to change a blade on a Stanley instant-change utility knife?
How to Change a Blade on a Stanley Instant-Change Retractable Utility Knife. Step 1. Push the slide button forward as far as it will go, or three full stops if it is retracted. Press down on the slide button and push it ... Video of the Day. Step 2. Step 3. Step 4.
How do I change the blade on my knife?
Push and hold the yellow button down while sliding the new blade into the knife. Push the blade all the way in until you feel it stop. Release the yellow button. Push in on the slide button and slide it all the way back to retract the blade.
How do you remove the blade from a pocket knife?
Basically, you push up on the little tab on the top of the blade – you can see my thumb there, and out comes the blade. If I was reversing the blade to use the other end, you re-insert it into the end of the knife. Use your thumb to press the lever up, make sure it’s secure.
How do I extend the blade on my machete?
FULLY EXTEND THE BLADE. Press down and forward again on the slide button until the button is in the full front of the top slot (0 through 3 in the below picture). Note- the blade must be extended beyond the 3rd detent position.
How do you open the Stanley utility knife 10 788?
0:111:44Stanley 10-788 Utility Knife Instructions and DemonstrationYouTubeStart of suggested clipEnd of suggested clipThere's a button on the back handle of the knife. All. You need to do is push that button pull theMoreThere's a button on the back handle of the knife. All. You need to do is push that button pull the side out.
How do you remove a blade from a Stanley knife?
0:523:31How To Change Blades in a Stanley 10-788 Utility Knife - YouTubeYouTubeStart of suggested clipEnd of suggested clipIf we push that all the way forward.MoreIf we push that all the way forward.
How do I change the blade on my utility knife?
1:147:39How to change the Blade on a utility knife - YouTubeYouTubeStart of suggested clipEnd of suggested clipI just kind of put it back in you push in there then you got to pull lift up and pull out same kindMoreI just kind of put it back in you push in there then you got to pull lift up and pull out same kind of vice-versa. That's the same this is the new blade here.
How do you put the blade in a Stanley carpet knife?
3:074:11How to assemble the Stanley carpet knife - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd a bowl so bolt goes in this little funky piece that holds the blade here the circle needs to beMoreAnd a bowl so bolt goes in this little funky piece that holds the blade here the circle needs to be popping upwards that's what I just found out slide that up into place there.
How do you change the blade on a Stanley Fatmax 10 778?
0:002:43How to Change a Blade in a Stanley FatMax Utility Knife - YouTubeYouTubeStart of suggested clipEnd of suggested clipYou simply push this little black button right here. And that will release the blade. And withoutMoreYou simply push this little black button right here. And that will release the blade. And without touching the sharp part I want to reach in ahead first of all stick it out all the way.
How do you open a utility knife?
0:433:39Replacing a Utility Knife & Box Cutter Blade | DIY - YouTubeYouTubeStart of suggested clipEnd of suggested clipYou just pop this top. Off. So this whole mechanism comes out of the utility knife or the casing.MoreYou just pop this top. Off. So this whole mechanism comes out of the utility knife or the casing. And then in the back typically.
How do you remove a blade from a cutter?
0:164:18BOX CUTTER BLADE CHANGING HOW TO - YouTubeYouTubeStart of suggested clipEnd of suggested clipGo ahead and put a brand new one in there just to be safe. And uh like i said you're gonna see theMoreGo ahead and put a brand new one in there just to be safe. And uh like i said you're gonna see the two little grooves.
How do you change the blade on a safety cutter?
3:405:20S4 Safety Cutter - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd swing open gently use your index finger to press the blades up from behind with the index fingerMoreAnd swing open gently use your index finger to press the blades up from behind with the index finger and slide one blade out with your thumb. To close the compartment.
How do you snap off box cutter blades?
0:002:233 Ways to Break off Utility Knife Blades - YouTubeYouTubeStart of suggested clipEnd of suggested clipPut put the first blade upside down into the slot on the second knife. And you'll see that there'sMorePut put the first blade upside down into the slot on the second knife. And you'll see that there's one line showing and then again safety goggles.
How do you put a blade in a carpet knife?
0:502:06How to put together the Stanley Retractable Carpet Knife - YouTubeYouTubeStart of suggested clipEnd of suggested clipMake sure that the protrusion is in the upward position. And that this is upward position and as youMoreMake sure that the protrusion is in the upward position. And that this is upward position and as you slide it you'll notice that this extension is a bug you're casting aside you blade so the back
How do you remove the packaging from a Stanley knife?
Press the red button at the blade end and firmly pull the last of the packaging out of the knife (do this straight and don't try to pull it out at an angle). It should come away quite easily if you've already done step 2.
How do you use a Stanley blade dispenser?
10:4812:29Stanley 11-921L 50-Pack Heavy Duty Utility Knife Box Cutter Blades with ...YouTubeStart of suggested clipEnd of suggested clipThat's the old blade and I'm gonna put one more of these blades in here just so I have it. And thenMoreThat's the old blade and I'm gonna put one more of these blades in here just so I have it. And then you take this thing and you close it. And that is how you change a blade on a Stanly utility knife.
Step 1
Push the slide button forward as far as it will go, or three full stops if it is retracted. Press down on the slide button and push it slightly forward. When it clicks, the button will stay down.
Step 2
Push the yellow button on the top of the knife. Put on work gloves. Pull the blade straight out while holding the yellow button down.
Step 3
Push and hold the yellow button down while sliding the new blade into the knife. Push the blade all the way in until you feel it stop.
Step 4
Release the yellow button. Push in on the slide button and slide it all the way back to retract the blade.