Receiving Helpdesk

how do i change the battery in my xfinity home security system

by Riley Kreiger DVM Published 3 years ago Updated 2 years ago

How do I change the battery in my Xfinity home security system? Sign in to the Xfinity Home Subscriber Portal. On the Overview page, click Devices in the menu bar. On the Devices page, you'll see a box for each of your devices. On the device information page, click Remove this device. In the ...

Part of a video titled XFINITY Home Battery Replacement: XHS2 Door and Window ...
0:18
1:32
The tamper switch may reset the sensor to factory settings. Next remove the old battery by usingMoreThe tamper switch may reset the sensor to factory settings. Next remove the old battery by using your fingertip to pull one end of the battery up until it is loose insert.

Full Answer

How to change the batteries in your home security system?

  • Backup batteries are often installed for prospective power failures
  • A control panel runs on AC power but still contains a backup battery
  • Even hardwired smoke detectors may have backup batteries installed
  • Motion detectors are typically battery powered because of their isolated placement

How much is Xfinity Home Security per month?

Xfinity home security starts at $29.99 a month and can be bundled with other Xfinity services. What is included in an Xfinity home security package? The most basic Xfinity Home Secure package includes professional monitoring, three door and window sensors, a touchscreen control, motion sensor, and a keypad.

Is Xfinity Home Security good?

Xfinity Home isn’t the best compared to other security systems. It offers less equipment, less automation, and fewer features than most big security companies like ADT and Vivint while costing the same or more. Again, we think Xfinity Home is best (and stands out more) when bundled with other Xfinity Home services.

What is Xfinity Home Security?

Xfinity is best for:

  • Existing Xfinity customers who are eligible for discounts for bundled services
  • Customers looking for a system that uses equipment from one company for maximum compatibility
  • Customers who want a single bill for their home security, cable TV, and internet services

How do I change the battery in my house alarm sensor?

0:411:52How to Replace the Battery for a Home Security Motion DetectorYouTubeStart of suggested clipEnd of suggested clipNext you must release the lens from the device by depressing three tabs on the device. Two on topMoreNext you must release the lens from the device by depressing three tabs on the device. Two on top and one on the bottom. Next remove the batteries insert the new batteries. Pay attention to polarity.

Does Xfinity Home Security have battery backup?

How it works: The alarm system connects to your Internet connection and includes a 24-hour battery backup in case you lose that connection or your power goes out.Sep 10, 2013

How do I reset my Xfinity security sensor?

Reset the Motion SensorPress the bottom of the face and push up to remove the sensor from the battery cover.Remove both batteries from the motion detector.While holding down the tamper switch (C), insert one battery into the motion detector.Release the tamper switch after one to two seconds.More items...

Do Xfinity cameras have batteries?

When you open a Motion Sensor to replace the battery, your Xfinity Home system will alert you that the Sensor is being tampered with. Don't worry, the tamper alert will clear when you reassemble the Sensor to the base or replace the battery cover.

How much is Xfinity Home security per month?

$29.99 a monthXfinity home security starts at $29.99 a month and can be bundled with other Xfinity services. What is included in an Xfinity home security package? The most basic Xfinity Home Secure package includes professional monitoring, three door and window sensors, a touchscreen control, motion sensor, and a keypad.Feb 23, 2022

Can you use Xfinity camera without service?

Xfinity Home Security lets you own the camera so that you can use it without Service. Disconnect and Reset all the devices in the Xfinity Network and hook it up to your new local network to start using it without service.Mar 14, 2022

How do you reset a door sensor?

instructions:Take off the Sensor's cover and remove battery. ... Touch the Sensor's body with a magnet.Insert the battery.Within 2 seconds remove the magnet from the Sensor's body, the LED will turn off. ... Remove the battery.Re-install the battery.Reset will be confirmed by LED blinking.

How do I turn off the chime on my Xfinity Home?

How do I turn the Door Chime on my TCH or UEI Keypad on or off? The Door Chime signals when a door with a Sensor is opened or closed. Press and hold the 8 button until you get a confirmation beep (~2 seconds) to toggle the chime on or off.

How do I get my door sensor back online?

0:052:05Reinstalling a Door & Window Sensor - YouTubeYouTubeStart of suggested clipEnd of suggested clipThen clean the surfaces with a dry cloth. Next take a small piece of the adhesive tape remove. OneMoreThen clean the surfaces with a dry cloth. Next take a small piece of the adhesive tape remove. One side of protective paper apply the tape to the sensor. And press firmly for 30 seconds.

What size battery do I need for Xfinity door Sensor?

CR2450 batteryInsert the CR2450 battery by placing it flat against the prongs in the battery compartment with the negative (-) side facing down. The battery should fit inside the battery cradle. Be sure not to press down on the tamper (red square) when inserting the battery as this will reset the Sensor to the factory settings.

How do you install door sensors on Comcast home?

On the Sensor & Zones screen, tap Add a Sensor/Zone. On the Locating Wireless Sensor screen, do the following, then tap Next. Put the sensor in pairing mode by placing the sensor face down and removing the plastic battery tab.

How long does it take to replace a battery?

Generally, you have about four to six weeks to replace a low battery, but how long the battery lasts depends on several things, including temperature, WiFi signal strength and how often a sensor is triggered.

What happens if a battery dies?

What happens if the battery dies completely? A device with a dead battery can't communicate. For example, if the battery in a door sensor is dead, it won't tell the system when the door is opened. You won't be able to use the Xfinity Home app or the touchscreen to see if it's closed.

Do You Need a Battery?

Make sure you have batteries before you proceed. Visit your nearest retail store that sells batteries or click the button below to order your replacement battery kit. Call us at 1-800-xfinity if you receive a low battery alert within 30 days of device installation.

How to Install the Battery

Before proceeding, make sure that your system is disarmed. Working on devices while the system is armed can generate false alarms. Did You Know? If you need to remove your Sensor from the wall to install a battery, you may want to have some double-sided tape on hand.

How to contact Xfinity Home?

Please contact Xfinity Home at 1-800-XFINITY (1-800-934-6489) if you need to troubleshoot a problem with your home security system or if you have a question about a battery order that Xfinity placed for you. Filter Products.

Does Xfinity have a security system?

The Xfinity Home security system gives you 24/7 professional home monitoring through the use of an assortment of unique tools and components, such as door sensors, motion detectors, smoke alarms, and thermostats. Each of these wireless sensors and tools is powered by non-rechargeable batteries and will, therefore, require replacement every few months or so. BatteryJunction.com and Comcast have joined forces to help Xfinity Home users keep their security systems powered and ready-to-go at all times. These replacement batteries for your Xfinity Home are from reputable manufacturers, including Panasonic and Energizer, all of which have been approved by Comcast themselves.

Reset Xfinity Home Station

Carefully place the Xfinity Home Station face down and remove the stand by gently pulling it up.

Reset TCA300 or XH1-TC Touchscreen

Place the touchscreen face down and remove the screw at the base of the screen.

Reset TCA200 or TCA203 Touchscreen

Remove the stand from the back of the touchscreen. Note: To avoid triggering the panic button, do not put the device face-down when removing the stand.

A B C D E F G H I J K L M N O P Q R S T U V W X Y Z 1 2 3 4 5 6 7 8 9