How do I apply Thompson's Water Seal to my fence? Scrub the fence with a long-handled brush and wood cleaner to remove grime. Fill a garden sprayer with polyurethane wood sealer. Spray up and back down the front of each fence slat to ensure full coverage. Walk to the back and repeat the process, ...
How do you use Thompson's WaterSeal on a fence?
When treating your fence and applying a Thompson's® WaterSeal® waterproofer or fence stain, follow the label’s application instructions carefully. Avoid lap marks by applying the waterproofer or stain along the vertical boards, moving from top to bottom and working on one or two boards at a time.
What is the best way to apply Thompson’s water seal?
The application technique that you choose will all depend on your own personal preference and particular situation. To apply Thompson’s water seal with a sprayer, you can use a garden sprayer with a hose or a pump sprayer.
Can You Spray Thompson’s water seal on railings?
Quick Note: While a spray application may be your preferred method to apply Thompson’s water seal to your deck, fencing, or another surface, for railings, consider painting it on with a brush. When you use a sprayer to apply sealant to railings, you’ll lose a significant amount of the product to overspray.
What kind of sprayer do you use on Thompson water seal?
Answer: The manufacturer of Thompson Water Seal recommended that you use their product with a plastic sprayer with a brass wand, such as our Chapin Premier sprayer. There are no concerns about it eroding any of the seals inside of it. Herein, how many coats of Thompson Water Seal do I need?
How to avoid lap marks on a wood deck?
What to do if water is absorbed on a fence?
How long does it take for a power washer to work on a fence?
How to prevent lap marks?
Do you need to clean exterior wood before painting?
Can you use Thompson's Waterseal on wood?
See more
How do you apply a WaterSeal to a fence?
It is easy to apply water seal to a wooden fence.Sand all splintered areas of the fence until smooth. ... Dust off the fence using a broom. ... Open and stir the water seal. ... Apply a thin coat of sealer to a small section of the wooden fence using the paint roller.More items...•
What is the best way to apply sealer to a fence?
0:383:34Best Application Methods For Ready Seal - YouTubeYouTubeStart of suggested clipEnd of suggested clipA paint roller is another great way to apply ready-seal simple and easy rolling is very easy as youMoreA paint roller is another great way to apply ready-seal simple and easy rolling is very easy as you can see it's a little bit faster than the brush.
Can you use Thompson Water Seal on fences?
For the convenience of a one-day project, Thompson's® WaterSeal® Exterior Stains can be applied to damp, freshly cleaned wood. When treating your fence and applying a Thompson's® WaterSeal® waterproofer or fence stain, follow the label's application instructions carefully.
Can you apply Thompson's water Seal with a sprayer?
Answer: The manufacturer of Thompson Water Seal recommended that you use their product with a plastic sprayer with a brass wand, such as our Chapin Premier sprayer. There are no concerns about it eroding any of the seals inside of it.
How Much Thompson water Seal do I need?
COVERAGE Thompson's Water Seal will cover approximately 4 m² per litre. Coverage will vary depending on the texture and porosity of the surface to being treated. DRYING TIME Thompson's Water Seal should be dry in 2 hours under normal conditions. Dry times depend on the texture & type of surface you're coating.
How much sealer do I need for my fence?
For a small fence, up to 175 square feet, you will only need one gallon of stain, in any transparency. If your fence is larger, up to 550 square feet, you will need to buy 2 gallons of stain. For very large fences, up to 700 square feet, you will need 3 to 4 gallons of stain to complete the project.
Do you need to seal both sides of a fence?
In reality, if one side of the fence faces a neighbor and they choose not to stain or seal their side will discolor and yours won't, without this affecting the structural integrity of the structure.
How long does Thompson water Seal last on wood?
How Long Does Thompson's WaterSeal Last? Thompson's WaterSeal Waterproofer Plus Clear Wood Protector claims to last for up to 4 years when applied correctly.
Should you water seal your fence?
Wood is porous, so every time it gets wet, the water does a bit more damage to the fence. Instead of letting the elements take their toll, use a water seal to protect your fence and extend its life.
Can you put 2 coats of Thompson's water seal?
Deck Sealing and Staining Tips Thompson's WaterSeal products typically need only one application, but you can apply a second coat of stain to darken the wood, if desired. However, you must wait for the first coat to dry (typically about 2 hours) and apply the second coat within 4 hours of applying the first coat.
Is Thompson Water Seal supposed to be thick?
Keep the coats thin regardless of which Thompson's product you have. Thompson's water sealants work best when applied in thin coats. Having liberal amounts of the product on your deck or patio will only prolong the drying time.
How long does it take for Thompson's water seal to dry?
Drying. Allow at least 48 hours to dry; however drying time will vary depending on the substrate, temperature, and humidity. Allow minimum of 30 days drying time before applying oil based paint over Thompson's® WaterSeal® Waterproofing Wood Sealer – Clear.
What to use to seal a garden sprayer?
Fill a garden sprayer with polyurethane wood sealer.
Can you use Thompson water seal with a brass wand?
Answer: The manufacturer of Thompson Water Seal recommended that you use their product with a plastic sprayer with a brass wand, such as our Chapin Premier sprayer. Once you are done with the product, it is recommended that you run mineral spirits through the sprayer and then water to clean it.
What Type of Sprayer?
To apply Thompson’s water seal with a sprayer, you can use a garden sprayer with a hose or a pump sprayer.
What is the difference between clear sealer and semi transparent stain?
Overall, the solid stain is much thicker and can offer the most fortification for wood. The clear sealer will take on the color of the wood and provides minimal protection against sunlight. On the other hand, semi-transparent stain can potentially modify the appearance of the wood on your deck.
How to apply Thompson's water seal?
To apply Thompson’s water seal with a sprayer, you can use a garden sprayer with a hose or a pump sprayer.
Why use a sealer on a deck?
The primary purpose of a sealer is to provide dependable protection for the surface of your deck.
How long does it take for a sealer to dry?
This will give it the necessary time to dry completely before it is able to get wet. If rain has occurred prior to application, allow at least four to five days for the surface to dry before you start applying the sealer. With spray application, some pigmented stains can clog the tip of the sprayer.
What to cover under deck furniture?
If you have any furniture or shrubbery nearby or underneath your deck, these will need to be protected from your application. Cover any surrounding objects with plastic sheeting to protect them from failing stain or paint.
What to do if your deck is attached to your house?
Additionally, if your deck is attached to your home, cover the siding with masking paper and masking tape.
Can you put Thompson Water Seal on concrete?
Thompson’s WaterSeal not only protects fresh concrete from moisture, it actually helps it cure when you apply it before the concrete has hardened. You can also apply Thompson’s WaterSeal to hardened concrete to seal out moisture. The application procedure is the same, but hardened concrete may need cleaning first.
How do you seal water against concrete?
Sweep all dirt, dust and debris away with a broom. Remove oil, grease, paint and any other stains that may be on your concrete floors.
How long does it take Thompson’s Water Seal to dry on concrete?
DRYING TIME Thompson’s Water Seal should be dry in 2 hours under normal conditions. Dry times depend on the texture & type of surface you’re coating. Remove as much product as possible from equipment before cleaning. All equipment should be cleaned immediately after use with detergent and warm water.
What is the difference between concrete sealer and Waterproofer?
Concrete sealers and waterproofing compounds perform similar functions in different ways. Sealers primarily form protective layers over concrete surfaces, while waterproofing compounds penetrate into surfaces to fill in gaps.
Is Thompson Water Seal any good?
I used my spray gun to apply, and a little goes a long way. Obviously, you can use a brush to apply it as well.
What is a good concrete sealer?
Keep reading to find out more about choosing and using the best concrete sealers.
Should I spray or roll concrete sealer?
Rough surfaces and high temperatures can also present problems when rolling solvent-based sealers due to puddling and surface bubbling. Consider spraying followed back rolling when sealing stamped or textured surfaces with a solvent-based sealer. Push and pull the sealer around, maintaining a wet edge.
How long does it take for Thompson's Waterseal to dry?
However, you must wait for the first coat to dry (typically about 2 hours) and apply the second coat within 4 hours of applying the first coat.
What is the difference between a stain and a sealer?
Generally speaking, a sealer does not color the wood and is designed primarily for protection against moisture, while a stain/sealer includes pigment that helps protect against the damaging effects of sunlight (UV degradation) in addition to sealing out moisture. There are three basic categories of sealers or stains: clear sealer, semi-transparent stain, and solid stain. Keep in mind that all deck stains are also sealers.
How to dispose of soiled rags?
2 Dispose of soiled rags in a sealed, water- and detergent-filled container or through another safe disposal method. Oily rags left in direct sunlight can catch fire. 3
How often should I reapply semi transparent stain?
It also must be reapplied more often than most stains, typically every year. Semi-transparent stain adds some color to the wood and offers a moderate amount of UV protection. It is the most common type of deck finish because it strikes the best balance between UV protection and a natural wood look.
How long does it take for a deck to dry before staining?
The forecast should indicate no rain for at least 24 hours after application. The deck surface should be allowed to dry for at least 48 hours before application.
Can deck sealer cause a fire?
Deck sealers and stains may contain solvents that can cause rags to spontaneously combust. Dispose of soiled rags in a sealed, water-filled container or through another safe disposal method. Oily rags left in direct sunlight can start on fire in a matter of minutes.
How to avoid lap marks on a wood deck?
Avoid lap marks by applying the waterproofer or stain along the vertical boards, moving from top to bottom and working on one or two boards at a time. For best results, use an exterior paint pad with a long handle. To prevent lap marks, keep the leading edge "wet" and distribute the finish evenly.
What to do if water is absorbed on a fence?
Splash water on a small area of the fence and if the water is absorbed rapidly, darkening the wood, it is time to re-apply a clear waterproofer or exterior stain. If the water beads up or otherwise remains on top of the wood, then it does not need protection at this time. In addition to protecting the wood, the type of waterproofer ...
How long does it take for a power washer to work on a fence?
Follow product label application instructions carefully. Allow the formula to sit on the fence for the time indicated on the product label, usually 10-15 minutes.
How to prevent lap marks?
To prevent lap marks, keep the leading edge "wet" and distribute the finish evenly. Brushes are particularly effective in tight or hard-to-reach spaces.
Do you need to clean exterior wood before painting?
All exterior wood, from decks to fences to siding, should be cleaned before sealing, staining or painting. Cleaning is a crucial step to long-lasting protection. It removes the discoloration that makes weathered wood unsightly and will improve the durability of a waterproofer or stain.
Can you use Thompson's Waterseal on wood?
After cleaning, your wood fence will need protection from water damage. For the convenience of a one-day project, Thompson's® WaterSeal® Exterior Stains can be applied to damp, freshly cleaned wood. When treating your fence and applying a Thompson's® WaterSeal® waterproofer or fence stain, follow the label’s application instructions carefully.
