Receiving Helpdesk

how do i adjust the temperature on my kic refrigerator

by Isaac Feest Published 3 years ago Updated 2 years ago

How do I adjust the temperature on my KIC refrigerator?

  • The numbers on the fridge's temperature dial indicate refrigerant power. The higher the number goes the colder the fridge will maintain.
  • If you're always storing plenty of food you need the colder settings (3 to 4).
  • As a general rule of thumb the front door of your fridge is its warmest place.

Full Answer

How do I adjust the temperature on my Refrigerator?

Refrigerator - Adjusting Temperature Controls At initial startup both the fresh food and freezer controls should be set at the normal settings or mid point settings. Temperature controls can be found in the back of the fresh food compartment, near the top of the fresh food compartment or on the exterior dispenser control panel.

How do I adjust the temperature on my Kenmore Elite refrigerator?

You're refrigerator will have a spinning gauge that adjusts the temperature for both the refrigerator part and the freezer. Sliding the gauge to the right will make the refrigerator or freezer colder, while sliding it to the left will make it warmer. Thanks!

What temperature should I Set my Refrigerator to?

You can go lower than 40 degrees to keep your food cool but you do not want to go any lower than 35 degrees F or your food will freeze. One way to check your fridge’s temperature consistency is to use a fish tank thermometer, and place it in a jar filled with water. Close the jar with a lid making sure the thermometer is fully covered.

How to adjust temperature on Dometic RV refrigerator?

How to Adjust Temperature on Dometic RV Refrigerator: Like most fridges, the Dometic brand in your RV is not hard to adjust when you need cooler or warmer temperatures. Normally there is a little white adjustment handle on one of the fins that does the job for you.

How do you adjust the temperature on a KIC refrigerator?

To adjust the temperature, follow these steps: Verify the display is not in child lock mode. Press the Freezer button repeatedly to cycle through the available temperature settings. Press the Fridge button repeatedly to cycle through the available temperature settings.Jul 1, 2020

What setting should my KIC fridge be?

What should the temperatures be inside my refrigerator and freezer? A temperature of 3 to 4°C on average is preferred, with upper and lower limits of 0 to 7°C. At 7°C food will deteriorate more quickly.

Why is my KIC fridge not cold?

Clogged coils can cause poor cooling. Check to make sure nothing is stuck in the condenser fan and that it spins freely (models with coils on the back won't have a fan). To do this, unplug the fridge and pull it out. Clean the fan blades and spin the fan by hand to see if it's stuck.Feb 10, 2022

Can you adjust refrigerator temperature control?

1:283:50Adjusting Side-bySide Refrigerator Temp Controls - Actual TempYouTubeStart of suggested clipEnd of suggested clipThis is normal and is due to usage and operating conditions to adjust the temperature cooler. PressMoreThis is normal and is due to usage and operating conditions to adjust the temperature cooler. Press the colder button of the desired compartment to decrease the temperature by only one degree.

What is Nirmal fridge temp?

40 degrees FahrenheitThe ideal refrigerator temperature is 40 degrees Fahrenheit or below, according to the Food and Drug Administration (FDA). These temperatures inhibit the growth of microorganisms like salmonella, E. coli, and listeria, which can cause foodborne illnesses.Jul 15, 2021

What causes the fridge to stop freezing?

Causes: If your freezer won't freeze, most likely the condenser coils are dirty which reduces the overall cooling capacity of the freezer. Evaporator fan motor is malfunctioning, and since it's in charge of circulating the air throughout the freezer, this will need to be resolved, pronto.

What is the coldest setting on a KIC fridge?

The settings on the refrigerator temperature button indicate the refrigerant capacity. The numbers usually range from one to five. Number one is the least cool environment and number five is the coldest.Aug 16, 2021

How do you fix a refrigerator that won't get cold?

Again, the owner's manual often gives clues to brand-specific fixes, so keep it handy as you assess the cause of your fridge not cooling.Check the refrigerator thermostat.Test the seals on your fridge doors.Determine whether the refrigerator is level.Clean the condenser coils.Jan 19, 2022

Will unplugging a fridge reset it?

Unplug your refrigerator Disconnect your fridge from its power source by removing the power cord from the wall outlet. You may hear some whooshing or knocking noises after you do so; that's normal. Make sure your fridge stays unplugged for several minutes, otherwise the reset won't work.Jun 15, 2021

What should the Dial be on in a fridge?

How to Change the Temperature in your Fridge FreezerDial DisplayTemperature Setting0Cooling system offMinimum or 1Warmest setting2 or 3Recommended settingMaximum or 5Coolest Setting

Is 1 or 5 colder on a fridge?

Some fridges don't show the temperature but work on a setting that is listed from 1 to 5. The numbers on the fridge's temperature dial indicate the refrigerating power. Therefore, the higher the setting, the cooler the fridge will be. Choosing setting 5 will make your fridge the coldest.Mar 6, 2019

How can I check my fridge temperature without a thermometer?

You can also use an instant-read meat thermometer. To check the temperature of a refrigerator, it's best to use food or liquid that has been in the compartment for at least 24 hours. The most common practice is to place a glass of water in the refrigerator (but not in the door) and let it sit for a day.Jul 20, 2018

How to check refrigerator temperature?

A clever way to check the refrigerator’s temperature is by touching your food. It’s not the most accurate way, but it can give you an idea of how to change the temperature so your drinks are cold or vegetables aren’t frozen, for instance.

How long to wait to set refrigerator temperature?

You’re aiming for a temperature around 37 °F (3 °C). Stick a thermometer on the center shelf and wait at least 5 hours for the new setting to take effect. Then, see if the temperature is to your liking. Keep using the dial to bring the refrigerator's temperature up to a healthy range.

How to make a refrigerator colder?

If your refrigerator has a range of 1 to 5, turn the dial toward 5 to get a good chill going or turn it toward 1 if you need to warm things up a bit. If your dial has notches on it, turn the dial clockwise to cool things down.

What does sliding the refrigerator gauge do?

Sliding the gauge to the right will make the refrigerator or freezer colder, while sliding it to the left will make it warmer.

How hot should my refrigerator be?

Keep pressing the buttons until the screen displays your desired temperature. Plan on getting the refrigerator to about 37 °F (3 °C). Set the temperature no higher than 40 °F (4 °C) to prevent your food from spoiling and becoming unsafe to eat.

Why is it important to set the temperature of a refrigerator?

When you set your refrigerator to a safe temperature, you protect food from spoiling and even keep it fresher for longer. All refrigerators are different, so every model has a slightly different temperature control system. Before you touch the controls, take the temperature with a thermometer.

Is it safe to eat lettuce in the refrigerator?

Anything 40 °F (4 °C) or below is considered safe. If you’re wondering why your lettuce is a frozen, soggy mess, your refrigerator is probably too cold. However, turning up the temperature too far could mean you encounter that dreaded odor of rancid milk.

What temperature should a refrigerator be set to?

According to the Department of Agriculture, bacteria growth in food accelerates at around 40° F, "so keeping your fridge temperature set to 37 degrees —and your freezer to zero—is a good idea," says Joseph Pacella, CR's refrigerator test engineer.

What to do if refrigerator doesn't budge?

If the refrigerator temperature doesn't budge, try cleaning the compressor coils, because dirty coils can prevent efficient cooling, Pacella says. Check your user manual for the coil location and vacuum them with a soft-bristle brush. If the refrigerator still doesn't get cold, you may need a repair—or a new fridge.

How long to wait to see if refrigerator temperature drops?

If you find that the interior is warmer than your refrigerator's readout, turn the fridge temperature down a few degrees and wait 24 hours to see whether the internal temp drops. If the refrigerator temperature moves down only slightly, keep making incremental decreases until you hit the desired 37° F mark.

Why does the temperature in my refrigerator go down?

A wide variety of factors can influence the temperature within your refrigerator, including simple changes in ambient temperatures brought on by the change of each season. In the winter, colder temperatures in the home can naturally cause the temperature in your refrigerator to go down, just as the opposite effect can occur during the summer.

What is the function of the dials on a refrigerator?

One of the dials on the fridge is responsible for directing the unit to create more or less cold air. The other simply operates a baffle to control how much cold air from the freezer is released into the fridge.

How long does it take for a thermometer to work?

Place the thermometer in a glass of water, then position the glass in the center of your fridge. Check the temperature after five to eight hours.

When are temperature controls set correctly?

The controls are set correctly when beverages are as cold as you would like.

Why do refrigerators need to be turned back on?

Some refrigerators need to be manually turned back on after a power outage or power surge. The refrigerator could also accidentally be turned off during routine cleaning. For Information on how to turn the refrigerator "Off" and "On", please see your Owner's Manual for specific information on your model. If you would like to download ...

What is a demo mode on a refrigerator?

Some refrigerators are equipped with a "Showroom" or "Demo" mode feature. This mode is used when the refrigerator is on display in a retail store or if you want to turn the cooling off and deactivates all other functions except interior lighting).

What temperature should a RV fridge be?

As stated the ideal cooling temperature for your RV’s Dometic fridge is between 40 and 42 degrees F. But sometimes the ideal is hard to maintain or you may have accidentally set the temperature control to the wrong level.

How to tell if RV fridge needs to be adjusted?

One sign that you need to adjust your RV’s Dometic fridge is seeing drips of water coming down from your freezer. This drips tell you that you need to make the fridge and freezer cooler.

How cold should an RV fridge be?

In either case those are not bad situations as you have some leeway in temperature ranges. For an RV Dometic fridge, you should not let the unit get warmer than 50 degrees F. it is just unsafe to store cold food at high temperature settings. The lowest number on the acceptable scale is 35 degrees F.

How cold should the fridge be to keep food cold?

You can go lower than 40 degrees to keep your food cool but you do not want to go any lower than 35 degrees F or your food will freeze. One way to check your fridge’s temperature consistency is to use a fish tank thermometer, and place it in a jar filled with water.

How long does it take for ice to get out of a fridge?

Others have found that if they put ice inside the fridge, their units took anywhere from 3 to 4 to 12 hours to get down to the ideal temperature. 8 hours may also be a possibility. Your experience may be different and it depends on a variety of factors.

Is a Dometic fridge the same as a RV fridge?

You may think that the RV Dometic fridge is different from the one in your home but that would be a miscalculation on your part. The two are basically the same unit that does the same task. That means that the ideal fridge temperature in your home is the same as the one in your RV.

Can you reset the temperature on a Dometic fridge?

Now you have to move the temperature control to a warmer setting. It is not hard to reset the temperature in your Dometic fridge. The temperature control in an RV Dometic fridge should be a little lever that goes up and down on the same fin. You do not want to move it side to side as some people have done.

A B C D E F G H I J K L M N O P Q R S T U V W X Y Z 1 2 3 4 5 6 7 8 9
8.3.17PHP Version2.18sRequest Duration2MBMemory UsageGET {post}Route
  • warninglog[07:14:23] LOG.warning: Creation of dynamic property Barryvdh\Debugbar\DataFormatter\QueryFormatter:...
  • warninglog[07:14:23] LOG.warning: Creation of dynamic property Barryvdh\Debugbar\DataFormatter\QueryFormatter:...
  • warninglog[07:14:23] LOG.warning: Callables of the form ["Swift_SmtpTransport", "Swift_Transport_EsmtpTranspor...
  • warninglog[07:14:23] LOG.warning: Creation of dynamic property Barryvdh\Debugbar\DataFormatter\SimpleFormatter...
  • warninglog[07:14:23] LOG.warning: Creation of dynamic property Barryvdh\Debugbar\DataFormatter\SimpleFormatter...
  • warninglog[07:14:23] LOG.warning: json_decode(): Passing null to parameter #1 ($json) of type string is deprec...
  • warninglog[07:14:23] LOG.warning: json_decode(): Passing null to parameter #1 ($json) of type string is deprec...
  • warninglog[07:14:23] LOG.warning: json_decode(): Passing null to parameter #1 ($json) of type string is deprec...
  • warninglog[07:14:23] LOG.warning: json_decode(): Passing null to parameter #1 ($json) of type string is deprec...
  • warninglog[07:14:23] LOG.warning: mt_rand(): Passing null to parameter #2 ($max) of type int is deprecated in ...
  • warninglog[07:14:23] LOG.warning: explode(): Passing null to parameter #2 ($string) of type string is deprecat...
  • Booting (21.09ms)
  • Application (2.15s)
  • 1 x Application (99.01%)
    2.15s
    1 x Booting (0.97%)
    21.09ms
    7 templates were rendered
    • themes.DevBlog.content.post (resources/views/themes/DevBlog/content/post.blade.php)34blade
      Params
      0
      post
      1
      postContent
      2
      author
      3
      updated_at
      4
      bing_rich_snippet_text
      5
      bing_rich_snippet_link
      6
      bing_related_keywords
      7
      google_related_keywords
      8
      bing_news_title
      9
      bing_news_description
      10
      bing_videos
      11
      bing_images
      12
      bing_search_result_title
      13
      bing_search_result_description
      14
      bing_search_result_url
      15
      bing_paa_questions
      16
      bing_paa_answers
      17
      bing_slider_faq_questions
      18
      bing_slider_faq_answers
      19
      bing_pop_faq_questions
      20
      bing_pop_faq_answers
      21
      bing_tab_faq_questions
      22
      bing_tab_faq_answers
      23
      google_faq_questions
      24
      google_faq_answers
      25
      google_rich_snippet
      26
      google_search_result
      27
      indexedArray
      28
      total_images
      29
      total_videos
      30
      settings
      31
      url_current
      32
      menus
      33
      sidebar
    • themes.DevBlog.layouts.master (resources/views/themes/DevBlog/layouts/master.blade.php)41blade
      Params
      0
      __env
      1
      app
      2
      errors
      3
      post
      4
      postContent
      5
      author
      6
      updated_at
      7
      bing_rich_snippet_text
      8
      bing_rich_snippet_link
      9
      bing_related_keywords
      10
      google_related_keywords
      11
      bing_news_title
      12
      bing_news_description
      13
      bing_videos
      14
      bing_images
      15
      bing_search_result_title
      16
      bing_search_result_description
      17
      bing_search_result_url
      18
      bing_paa_questions
      19
      bing_paa_answers
      20
      bing_slider_faq_questions
      21
      bing_slider_faq_answers
      22
      bing_pop_faq_questions
      23
      bing_pop_faq_answers
      24
      bing_tab_faq_questions
      25
      bing_tab_faq_answers
      26
      google_faq_questions
      27
      google_faq_answers
      28
      google_rich_snippet
      29
      google_search_result
      30
      indexedArray
      31
      total_images
      32
      total_videos
      33
      settings
      34
      url_current
      35
      menus
      36
      sidebar
      37
      i
      38
      __currentLoopData
      39
      loop
      40
      item
    • themes.DevBlog.panels.head (resources/views/themes/DevBlog/panels/head.blade.php)41blade
      Params
      0
      __env
      1
      app
      2
      errors
      3
      post
      4
      postContent
      5
      author
      6
      updated_at
      7
      bing_rich_snippet_text
      8
      bing_rich_snippet_link
      9
      bing_related_keywords
      10
      google_related_keywords
      11
      bing_news_title
      12
      bing_news_description
      13
      bing_videos
      14
      bing_images
      15
      bing_search_result_title
      16
      bing_search_result_description
      17
      bing_search_result_url
      18
      bing_paa_questions
      19
      bing_paa_answers
      20
      bing_slider_faq_questions
      21
      bing_slider_faq_answers
      22
      bing_pop_faq_questions
      23
      bing_pop_faq_answers
      24
      bing_tab_faq_questions
      25
      bing_tab_faq_answers
      26
      google_faq_questions
      27
      google_faq_answers
      28
      google_rich_snippet
      29
      google_search_result
      30
      indexedArray
      31
      total_images
      32
      total_videos
      33
      settings
      34
      url_current
      35
      menus
      36
      sidebar
      37
      i
      38
      __currentLoopData
      39
      loop
      40
      item
    • themes.DevBlog.panels.header (resources/views/themes/DevBlog/panels/header.blade.php)41blade
      Params
      0
      __env
      1
      app
      2
      errors
      3
      post
      4
      postContent
      5
      author
      6
      updated_at
      7
      bing_rich_snippet_text
      8
      bing_rich_snippet_link
      9
      bing_related_keywords
      10
      google_related_keywords
      11
      bing_news_title
      12
      bing_news_description
      13
      bing_videos
      14
      bing_images
      15
      bing_search_result_title
      16
      bing_search_result_description
      17
      bing_search_result_url
      18
      bing_paa_questions
      19
      bing_paa_answers
      20
      bing_slider_faq_questions
      21
      bing_slider_faq_answers
      22
      bing_pop_faq_questions
      23
      bing_pop_faq_answers
      24
      bing_tab_faq_questions
      25
      bing_tab_faq_answers
      26
      google_faq_questions
      27
      google_faq_answers
      28
      google_rich_snippet
      29
      google_search_result
      30
      indexedArray
      31
      total_images
      32
      total_videos
      33
      settings
      34
      url_current
      35
      menus
      36
      sidebar
      37
      i
      38
      __currentLoopData
      39
      loop
      40
      item
    • themes.DevBlog.panels.navbar (resources/views/themes/DevBlog/panels/navbar.blade.php)41blade
      Params
      0
      __env
      1
      app
      2
      errors
      3
      post
      4
      postContent
      5
      author
      6
      updated_at
      7
      bing_rich_snippet_text
      8
      bing_rich_snippet_link
      9
      bing_related_keywords
      10
      google_related_keywords
      11
      bing_news_title
      12
      bing_news_description
      13
      bing_videos
      14
      bing_images
      15
      bing_search_result_title
      16
      bing_search_result_description
      17
      bing_search_result_url
      18
      bing_paa_questions
      19
      bing_paa_answers
      20
      bing_slider_faq_questions
      21
      bing_slider_faq_answers
      22
      bing_pop_faq_questions
      23
      bing_pop_faq_answers
      24
      bing_tab_faq_questions
      25
      bing_tab_faq_answers
      26
      google_faq_questions
      27
      google_faq_answers
      28
      google_rich_snippet
      29
      google_search_result
      30
      indexedArray
      31
      total_images
      32
      total_videos
      33
      settings
      34
      url_current
      35
      menus
      36
      sidebar
      37
      i
      38
      __currentLoopData
      39
      loop
      40
      item
    • themes.DevBlog.panels.footer (resources/views/themes/DevBlog/panels/footer.blade.php)41blade
      Params
      0
      __env
      1
      app
      2
      errors
      3
      post
      4
      postContent
      5
      author
      6
      updated_at
      7
      bing_rich_snippet_text
      8
      bing_rich_snippet_link
      9
      bing_related_keywords
      10
      google_related_keywords
      11
      bing_news_title
      12
      bing_news_description
      13
      bing_videos
      14
      bing_images
      15
      bing_search_result_title
      16
      bing_search_result_description
      17
      bing_search_result_url
      18
      bing_paa_questions
      19
      bing_paa_answers
      20
      bing_slider_faq_questions
      21
      bing_slider_faq_answers
      22
      bing_pop_faq_questions
      23
      bing_pop_faq_answers
      24
      bing_tab_faq_questions
      25
      bing_tab_faq_answers
      26
      google_faq_questions
      27
      google_faq_answers
      28
      google_rich_snippet
      29
      google_search_result
      30
      indexedArray
      31
      total_images
      32
      total_videos
      33
      settings
      34
      url_current
      35
      menus
      36
      sidebar
      37
      i
      38
      __currentLoopData
      39
      loop
      40
      item
    • themes.DevBlog.panels.scripts (resources/views/themes/DevBlog/panels/scripts.blade.php)41blade
      Params
      0
      __env
      1
      app
      2
      errors
      3
      post
      4
      postContent
      5
      author
      6
      updated_at
      7
      bing_rich_snippet_text
      8
      bing_rich_snippet_link
      9
      bing_related_keywords
      10
      google_related_keywords
      11
      bing_news_title
      12
      bing_news_description
      13
      bing_videos
      14
      bing_images
      15
      bing_search_result_title
      16
      bing_search_result_description
      17
      bing_search_result_url
      18
      bing_paa_questions
      19
      bing_paa_answers
      20
      bing_slider_faq_questions
      21
      bing_slider_faq_answers
      22
      bing_pop_faq_questions
      23
      bing_pop_faq_answers
      24
      bing_tab_faq_questions
      25
      bing_tab_faq_answers
      26
      google_faq_questions
      27
      google_faq_answers
      28
      google_rich_snippet
      29
      google_search_result
      30
      indexedArray
      31
      total_images
      32
      total_videos
      33
      settings
      34
      url_current
      35
      menus
      36
      sidebar
      37
      i
      38
      __currentLoopData
      39
      loop
      40
      item
    uri
    GET {post}
    middleware
    web, checkdate
    as
    post.show
    controller
    App\Http\Controllers\Frontend\json_data\PostController@show
    namespace
    where
    file
    app/Http/Controllers/Frontend/json_data/PostController.php:18-166
    7 statements were executed2.13s
    • select * from `posts` where `published_at` <= '2025-05-04 07:14:23' and `slug` = 'how-do-i-adjust-the-temperature-on-my-kic-refrigerator' and `posts`.`deleted_at` is null limit 1
      6.24ms/app/Providers/RouteServiceProvider.php:54receivinghelpdeskask
      Metadata
      Bindings
      • 0. 2025-05-04 07:14:23
      • 1. how-do-i-adjust-the-temperature-on-my-kic-refrigerator
      Backtrace
      • 15. /app/Providers/RouteServiceProvider.php:54
      • 18. /vendor/laravel/framework/src/Illuminate/Routing/Router.php:842
      • 19. Route binding:39
      • 20. /vendor/laravel/framework/src/Illuminate/Pipeline/Pipeline.php:167
      • 21. /vendor/laravel/framework/src/Illuminate/Foundation/Http/Middleware/VerifyCsrfToken.php:78
    • select * from `json_post_contents` where `json_post_contents`.`post_id` = 149635 and `json_post_contents`.`post_id` is not null and `rewrite_id` = 0
      10.76msmiddleware::checkdate:30receivinghelpdeskask
      Metadata
      Bindings
      • 0. 149635
      • 1. 0
      Backtrace
      • 19. middleware::checkdate:30
      • 20. /vendor/laravel/framework/src/Illuminate/Pipeline/Pipeline.php:167
      • 21. /vendor/laravel/jetstream/src/Http/Middleware/ShareInertiaData.php:61
      • 22. /vendor/laravel/framework/src/Illuminate/Pipeline/Pipeline.php:167
      • 23. /vendor/laravel/framework/src/Illuminate/Routing/Middleware/SubstituteBindings.php:50
    • select * from `nova_menu_menus` where `slug` = 'header' limit 1
      850μs/vendor/outl1ne/nova-menu-builder/src/helpers.php:32receivinghelpdeskask
      Metadata
      Bindings
      • 0. header
      Backtrace
      • 15. /vendor/outl1ne/nova-menu-builder/src/helpers.php:32
      • 17. /vendor/laravel/framework/src/Illuminate/Routing/Controller.php:54
      • 18. /vendor/laravel/framework/src/Illuminate/Routing/ControllerDispatcher.php:45
      • 19. /vendor/laravel/framework/src/Illuminate/Routing/Route.php:261
      • 20. /vendor/laravel/framework/src/Illuminate/Routing/Route.php:205
    • select * from `nova_menu_menu_items` where `nova_menu_menu_items`.`menu_id` = 1 and `nova_menu_menu_items`.`menu_id` is not null and `parent_id` is null order by `parent_id` asc, `order` asc, `name` asc
      1.23ms/vendor/outl1ne/nova-menu-builder/src/Models/Menu.php:35receivinghelpdeskask
      Metadata
      Bindings
      • 0. 1
      Backtrace
      • 19. /vendor/outl1ne/nova-menu-builder/src/Models/Menu.php:35
      • 20. /vendor/outl1ne/nova-menu-builder/src/helpers.php:33
      • 22. /vendor/laravel/framework/src/Illuminate/Routing/Controller.php:54
      • 23. /vendor/laravel/framework/src/Illuminate/Routing/ControllerDispatcher.php:45
      • 24. /vendor/laravel/framework/src/Illuminate/Routing/Route.php:261
    • select * from `nova_menu_menu_items` where `nova_menu_menu_items`.`parent_id` in (1) order by `order` asc
      1.61ms/vendor/outl1ne/nova-menu-builder/src/Models/Menu.php:35receivinghelpdeskask
      Metadata
      Backtrace
      • 24. /vendor/outl1ne/nova-menu-builder/src/Models/Menu.php:35
      • 25. /vendor/outl1ne/nova-menu-builder/src/helpers.php:33
      • 27. /vendor/laravel/framework/src/Illuminate/Routing/Controller.php:54
      • 28. /vendor/laravel/framework/src/Illuminate/Routing/ControllerDispatcher.php:45
      • 29. /vendor/laravel/framework/src/Illuminate/Routing/Route.php:261
    • select `id`, `post_title`, `slug` from `posts` where `status` = 'publish' and `posts`.`deleted_at` is null order by RAND() limit 10
      2.1s/app/View/Composers/SidebarView.php:22receivinghelpdeskask
      Metadata
      Bindings
      • 0. publish
      Backtrace
      • 14. /app/View/Composers/SidebarView.php:22
      • 15. /app/View/Composers/SidebarView.php:12
      • 16. /vendor/laravel/framework/src/Illuminate/View/Concerns/ManagesEvents.php:124
      • 17. /vendor/laravel/framework/src/Illuminate/View/Concerns/ManagesEvents.php:162
      • 20. /vendor/laravel/framework/src/Illuminate/View/Concerns/ManagesEvents.php:177
    • select * from `fake_users` where `fake_users`.`id` = 25283 limit 1
      8.58msview::2dd102cf0462e89a4d4d8bc77355d767652bf9aa:15receivinghelpdeskask
      Metadata
      Bindings
      • 0. 25283
      Backtrace
      • 21. view::2dd102cf0462e89a4d4d8bc77355d767652bf9aa:15
      • 23. /vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:108
      • 24. /vendor/laravel/framework/src/Illuminate/View/Engines/PhpEngine.php:58
      • 25. /vendor/livewire/livewire/src/ComponentConcerns/RendersLivewireComponents.php:69
      • 26. /vendor/laravel/framework/src/Illuminate/View/Engines/CompilerEngine.php:61
    App\Models\FakeUser
    1
    Outl1ne\MenuBuilder\Models\MenuItem
    1
    Outl1ne\MenuBuilder\Models\Menu
    1
    App\Models\JsonPostContent
    1
    App\Models\Post
    11
        _token
        Z8cEbUhXVzULIgUF3bslgewr8abE3tXZItJE2yXY
        _previous
        array:1 [ "url" => "https://receivinghelpdesk.com/ask/how-do-i-adjust-the-temperature-on-my-kic-re...
        _flash
        array:2 [ "old" => [] "new" => [] ]
        PHPDEBUGBAR_STACK_DATA
        []
        path_info
        /how-do-i-adjust-the-temperature-on-my-kic-refrigerator
        status_code
        200
        
        status_text
        OK
        format
        html
        content_type
        text/html; charset=UTF-8
        request_query
        []
        
        request_request
        []
        
        request_headers
        0 of 0
        array:24 [ "cf-ipcountry" => array:1 [ 0 => "US" ] "cf-connecting-ip" => array:1 [ 0 => "18.224.18.7" ] "cdn-loop" => array:1 [ 0 => "cloudflare; loops=1" ] "sec-fetch-site" => array:1 [ 0 => "none" ] "accept" => array:1 [ 0 => "text/html,application/xhtml+xml,application/xml;q=0.9,image/avif,image/webp,image/apng,*/*;q=0.8,application/signed-exchange;v=b3;q=0.7" ] "user-agent" => array:1 [ 0 => "Mozilla/5.0 AppleWebKit/537.36 (KHTML, like Gecko; compatible; ClaudeBot/1.0; +claudebot@anthropic.com)" ] "upgrade-insecure-requests" => array:1 [ 0 => "1" ] "sec-ch-ua-platform" => array:1 [ 0 => ""Windows"" ] "sec-ch-ua-mobile" => array:1 [ 0 => "?0" ] "sec-ch-ua" => array:1 [ 0 => ""Chromium";v="130", "HeadlessChrome";v="130", "Not?A_Brand";v="99"" ] "cache-control" => array:1 [ 0 => "no-cache" ] "pragma" => array:1 [ 0 => "no-cache" ] "sec-fetch-dest" => array:1 [ 0 => "document" ] "cf-ray" => array:1 [ 0 => "93a45008ddb468d7-ORD" ] "accept-encoding" => array:1 [ 0 => "gzip, br" ] "priority" => array:1 [ 0 => "u=0, i" ] "sec-fetch-user" => array:1 [ 0 => "?1" ] "sec-fetch-mode" => array:1 [ 0 => "navigate" ] "cf-visitor" => array:1 [ 0 => "{"scheme":"https"}" ] "connection" => array:1 [ 0 => "close" ] "x-forwarded-proto" => array:1 [ 0 => "https" ] "x-forwarded-for" => array:1 [ 0 => "18.224.18.7, 172.69.59.78" ] "x-server-addr" => array:1 [ 0 => "154.12.239.204" ] "host" => array:1 [ 0 => "receivinghelpdesk.com" ] ]
        request_server
        0 of 0
        array:55 [ "USER" => "runcloud" "HOME" => "/home/runcloud" "SCRIPT_NAME" => "/ask/index.php" "REQUEST_URI" => "/ask/how-do-i-adjust-the-temperature-on-my-kic-refrigerator" "QUERY_STRING" => "" "REQUEST_METHOD" => "GET" "SERVER_PROTOCOL" => "HTTP/1.0" "GATEWAY_INTERFACE" => "CGI/1.1" "REDIRECT_URL" => "/ask/how-do-i-adjust-the-temperature-on-my-kic-refrigerator" "REMOTE_PORT" => "43686" "SCRIPT_FILENAME" => "/home/runcloud/webapps/ReceivingHelpDesk/ask/index.php" "SERVER_ADMIN" => "you@example.com" "CONTEXT_DOCUMENT_ROOT" => "/home/runcloud/webapps/ReceivingHelpDesk/" "CONTEXT_PREFIX" => "" "REQUEST_SCHEME" => "http" "DOCUMENT_ROOT" => "/home/runcloud/webapps/ReceivingHelpDesk/" "REMOTE_ADDR" => "172.69.59.78" "SERVER_PORT" => "80" "SERVER_ADDR" => "127.0.0.1" "SERVER_NAME" => "receivinghelpdesk.com" "SERVER_SOFTWARE" => "Apache/2.4.63 (Unix) OpenSSL/1.1.1f" "SERVER_SIGNATURE" => "" "LD_LIBRARY_PATH" => "/RunCloud/Packages/apache2-rc/lib" "PATH" => "/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin" "HTTP_CF_IPCOUNTRY" => "US" "HTTP_CF_CONNECTING_IP" => "18.224.18.7" "HTTP_CDN_LOOP" => "cloudflare; loops=1" "HTTP_SEC_FETCH_SITE" => "none" "HTTP_ACCEPT" => "text/html,application/xhtml+xml,application/xml;q=0.9,image/avif,image/webp,image/apng,*/*;q=0.8,application/signed-exchange;v=b3;q=0.7" "HTTP_USER_AGENT" => "Mozilla/5.0 AppleWebKit/537.36 (KHTML, like Gecko; compatible; ClaudeBot/1.0; +claudebot@anthropic.com)" "HTTP_UPGRADE_INSECURE_REQUESTS" => "1" "HTTP_SEC_CH_UA_PLATFORM" => ""Windows"" "HTTP_SEC_CH_UA_MOBILE" => "?0" "HTTP_SEC_CH_UA" => ""Chromium";v="130", "HeadlessChrome";v="130", "Not?A_Brand";v="99"" "HTTP_CACHE_CONTROL" => "no-cache" "HTTP_PRAGMA" => "no-cache" "HTTP_SEC_FETCH_DEST" => "document" "HTTP_CF_RAY" => "93a45008ddb468d7-ORD" "HTTP_ACCEPT_ENCODING" => "gzip, br" "HTTP_PRIORITY" => "u=0, i" "HTTP_SEC_FETCH_USER" => "?1" "HTTP_SEC_FETCH_MODE" => "navigate" "HTTP_CF_VISITOR" => "{"scheme":"https"}" "HTTP_CONNECTION" => "close" "HTTP_X_FORWARDED_PROTO" => "https" "HTTP_X_FORWARDED_FOR" => "18.224.18.7, 172.69.59.78" "HTTP_X_SERVER_ADDR" => "154.12.239.204" "HTTP_HOST" => "receivinghelpdesk.com" "HTTPS" => "on" "REDIRECT_STATUS" => "200" "REDIRECT_HTTPS" => "on" "FCGI_ROLE" => "RESPONDER" "PHP_SELF" => "/ask/index.php" "REQUEST_TIME_FLOAT" => 1746323063.2926 "REQUEST_TIME" => 1746323063 ]
        request_cookies
        []
        
        response_headers
        0 of 0
        array:7 [ "content-type" => array:1 [ 0 => "text/html; charset=UTF-8" ] "cache-control" => array:1 [ 0 => "private, must-revalidate" ] "date" => array:1 [ 0 => "Sun, 04 May 2025 01:44:23 GMT" ] "pragma" => array:1 [ 0 => "no-cache" ] "expires" => array:1 [ 0 => -1 ] "set-cookie" => array:2 [ 0 => "XSRF-TOKEN=eyJpdiI6IkNRSFVMS05XVGpwZkJjbjBZaG04a0E9PSIsInZhbHVlIjoiUlVOYUVMOTFtdVBqSGFQZzJvMVVtRlZsdmdGSVFNdzFHWXp5T3B5L0ovMUtLRUxzZS80RHBGTTRTMzh4Q2pUUDNlckNsUWNkaWFpaE1zZWt4OGs0RWRKK0xkdnpkd2s5cGw2T1p4ZHJnTkdPRDJQWTJDMnZ0Qm9uYjY3UWsyWTAiLCJtYWMiOiIxMmMzZDM0OGQ1Yjk2Y2FlZDA0NjE5OGJlZTJiMGU4ZDJjMGQ2OTA2YTIwYWQ5YzU1YjEzYmVmOWRiNmU3NGJmIiwidGFnIjoiIn0%3D; expires=Sun, 04-May-2025 03:44:25 GMT; Max-Age=7200; path=/; samesite=laxXSRF-TOKEN=eyJpdiI6IkNRSFVMS05XVGpwZkJjbjBZaG04a0E9PSIsInZhbHVlIjoiUlVOYUVMOTFtdVBqSGFQZzJvMVVtRlZsdmdGSVFNdzFHWXp5T3B5L0ovMUtLRUxzZS80RHBGTTRTMzh4Q2pUUDNlckNsU" 1 => "askhelpdesk_session=eyJpdiI6InpjR0N2VE5ZYjY1L3FoV1JjdjhSZlE9PSIsInZhbHVlIjoiNWxQYmVxRjJIRWFyNmlocVpEanEzSVU0eGR2cXhXTkNJNWN0T3pOTFlZdHRjdXdsU21lWDAvcStoY2pkQTNHcmJHRmZWNUxqTkNERDlidUpqeUdIZmd5S2YxYUtXZDBwVkk0WGs4WTd4SVpNZUI2REtqb2YvSjRGTVhIZ3IzWTIiLCJtYWMiOiJjZGE1YzRlNmY3MjU2MjAwODUwZWEzMDQ1M2Y5YjljOTQ0NWFiMjNiN2NjMzY1NzlhMzYxNjAxMjY4Njk5OWJmIiwidGFnIjoiIn0%3D; expires=Sun, 04-May-2025 03:44:25 GMT; Max-Age=7200; path=/; httponly; samesite=laxaskhelpdesk_session=eyJpdiI6InpjR0N2VE5ZYjY1L3FoV1JjdjhSZlE9PSIsInZhbHVlIjoiNWxQYmVxRjJIRWFyNmlocVpEanEzSVU0eGR2cXhXTkNJNWN0T3pOTFlZdHRjdXdsU21lWDAvcStoY2pkQTNH" ] "Set-Cookie" => array:2 [ 0 => "XSRF-TOKEN=eyJpdiI6IkNRSFVMS05XVGpwZkJjbjBZaG04a0E9PSIsInZhbHVlIjoiUlVOYUVMOTFtdVBqSGFQZzJvMVVtRlZsdmdGSVFNdzFHWXp5T3B5L0ovMUtLRUxzZS80RHBGTTRTMzh4Q2pUUDNlckNsUWNkaWFpaE1zZWt4OGs0RWRKK0xkdnpkd2s5cGw2T1p4ZHJnTkdPRDJQWTJDMnZ0Qm9uYjY3UWsyWTAiLCJtYWMiOiIxMmMzZDM0OGQ1Yjk2Y2FlZDA0NjE5OGJlZTJiMGU4ZDJjMGQ2OTA2YTIwYWQ5YzU1YjEzYmVmOWRiNmU3NGJmIiwidGFnIjoiIn0%3D; expires=Sun, 04-May-2025 03:44:25 GMT; path=/XSRF-TOKEN=eyJpdiI6IkNRSFVMS05XVGpwZkJjbjBZaG04a0E9PSIsInZhbHVlIjoiUlVOYUVMOTFtdVBqSGFQZzJvMVVtRlZsdmdGSVFNdzFHWXp5T3B5L0ovMUtLRUxzZS80RHBGTTRTMzh4Q2pUUDNlckNsU" 1 => "askhelpdesk_session=eyJpdiI6InpjR0N2VE5ZYjY1L3FoV1JjdjhSZlE9PSIsInZhbHVlIjoiNWxQYmVxRjJIRWFyNmlocVpEanEzSVU0eGR2cXhXTkNJNWN0T3pOTFlZdHRjdXdsU21lWDAvcStoY2pkQTNHcmJHRmZWNUxqTkNERDlidUpqeUdIZmd5S2YxYUtXZDBwVkk0WGs4WTd4SVpNZUI2REtqb2YvSjRGTVhIZ3IzWTIiLCJtYWMiOiJjZGE1YzRlNmY3MjU2MjAwODUwZWEzMDQ1M2Y5YjljOTQ0NWFiMjNiN2NjMzY1NzlhMzYxNjAxMjY4Njk5OWJmIiwidGFnIjoiIn0%3D; expires=Sun, 04-May-2025 03:44:25 GMT; path=/; httponlyaskhelpdesk_session=eyJpdiI6InpjR0N2VE5ZYjY1L3FoV1JjdjhSZlE9PSIsInZhbHVlIjoiNWxQYmVxRjJIRWFyNmlocVpEanEzSVU0eGR2cXhXTkNJNWN0T3pOTFlZdHRjdXdsU21lWDAvcStoY2pkQTNH" ] ]
        session_attributes
        0 of 0
        array:4 [ "_token" => "Z8cEbUhXVzULIgUF3bslgewr8abE3tXZItJE2yXY" "_previous" => array:1 [ "url" => "https://receivinghelpdesk.com/ask/how-do-i-adjust-the-temperature-on-my-kic-refrigerator" ] "_flash" => array:2 [ "old" => [] "new" => [] ] "PHPDEBUGBAR_STACK_DATA" => [] ]