how do i adjust the shocks on my invisible fence collar

How do I adjust the shocks on my invisible fence collar? The collar will beep or blink in series to indicate the new shock level. Press the button again within 5 seconds to raise the level once more. Continue until the collar indicates it is at the correction level you desire.

Full Answer

How should an invisible fence collar fit?

The Invisible Fence collar should be snug enough to slide only one finger between a correction post and your pet’s skin. Remember to adjust the fit of the collar as your pet’s coat, weight, and age change. Your pet’s coat may change from season to season. Is Invisible Fence waterproof?

How do I replace the battery in my Invisible Fence collar?

How do I replace the battery in my Invisible Fence Computer Collar? Use a small, thin coin to remove the Power Cap battery from the Computer Collar unit. Insert the coin in the slot on top of the Power Cap unit and turn it 45 degrees counter-clockwise.

How do I know what shock setting is on my Collar?

You can actually find out which setting the collar is on by pressing the push button. After pushing the button, the collar will either blink or beep to tell you that it is working properly. It will then do so again, up to 5 times, to show you what the shock setting is.

How many flashes should I set my shock collar to?

When you get to 6 flashes, the high setting, if you press mode again it will reset down to the 1, tone/beep only, setting. Continue to press mode for a second and release until you get to the desired correctly level. What Level Should I Set My Shock Collar?

How do you adjust a shock collar?

0:162:10How to Properly Fit a Remote Training Dog Collar - YouTubeYouTubeStart of suggested clipEnd of suggested clipWe want the strap to be going around the narrowest part of the dog's neck. You take a look at yourMoreWe want the strap to be going around the narrowest part of the dog's neck. You take a look at your dog's and actor just like ours they're narrowest up on top by the head widest.

How do I change the strength on my petsafe collar?

0:030:51How to Set the Correction Level of the Premier Pet Wireless FenceYouTubeStart of suggested clipEnd of suggested clipButton. Press the correction level button and release when the LED. Indicator light lights up a justMoreButton. Press the correction level button and release when the LED. Indicator light lights up a just a static correction level by pressing.

How tight should invisible fence collar be?

How tight should my pet's Invisible Fence Computer Collar be around their neck? The Invisible Fence collar should be snug enough to slide only one finger between a correction post and your pet's skin. Remember to adjust the fit of the collar as your pet's coat, weight, and age change.

Why is my invisible fence collar beeping but not shocking?

Why is my Invisible Fence control panel beeping? If your Invisible Fence control panel is beeping every second, the most likely issue is that you have a wire break somewhere on your property. These can be caused by digging too deep when working in the yard, burrowing animals, and even the weather.

How do you set up a PetSafe shock collar?

2:093:47How to Install a PetSafe® Wireless Dog Fence - YouTubeYouTubeStart of suggested clipEnd of suggested clipCenter the contact points underneath the neck assuring that they touch the skin tighten the collarMoreCenter the contact points underneath the neck assuring that they touch the skin tighten the collar until you can insert one finger between the end of the contact point and your pet's.

What does the button on the PetSafe collar do?

The number of flashes on the collar indicates the current collar level. Press again quickly to increase the collar level. To set lower levels, continue through all the levels until there is one flash indicating level 1. Important: Some containment collars have different button locations, but the steps remain the same.

What level should a shock collar be on?

With the Collar Receiver turned on and properly fitted to your dog, set the Remote Transmitter's Intensity Dial at Level 1 and press the Continuous Stimulation Button for 1 to 2 seconds. If your dog shows no reaction to Level 1, go to Level 2 and repeat the process.

How do I know if my e collar is too tight?

If the receiver box swings freely around the dog's neck when you try to move it, it is on too loose. If the receiver box will not budge when you try to move it, it is on too tightly. Too tight of a fit can contribute to pressure sores being created under the contact points.

How tight should a shock collar be on a dog?

The collar strap should be tight enough that the contact points are applying light pressure on your dog's neck but it shouldn't be able to slide or re-position itself on your pet's neck. You may have to take a few minutes to get the right adjustment, but this step is very important when working with e-collars.

What does flashing red light mean on invisible fence collar?

Troubleshooting Questions. Why is my Invisible Fence collar blinking red? If you have started to see a red flashing light on your pet's Computer Collar unit, your Power Cap battery may need to be replaced. You can order replacement batteries online, from your local dealer, or by calling 1-800-824-3647.

How do I know if my invisible fence collar is working?

A light on the battery tester and audible tone on the receiver confirms that the collar is operating properly. If you get the audible warning but not a light, replace the battery.

What does saturation mean on Invisible Fence?

Saturation: Indicates Loop 1 transmitter output saturation. Loop saturation exists when the signal has reached maximum output level, which is caused by excessive loop size, excessive resistance, or poor connections.

What Level Should I Set My Shock Collar?

When training initially you should start without a static correction setting. Use treats and praise to teach them the edge of the invisible or wireless boundary.

How Do I Know If My Shock Collar Is Working?

You want to set it to a minimum setting where your dog notices the static correction and doesn’t yelp or seem stressed or in pain.

How Many Volts Should A Dog Shock Collar Have?

Other sources have claimed that shock collars range from 400 to 6,000 volts. This does not seem to be true.

Where Should A Shock Collar Be Placed On A Dog?

Shock collars should be placed on your dog ’s neck under their chin. Follow the instructions above to properly fit and tighten a shock collar.

How Long Should You Leave A Shock Collar On A Dog?

As this article relates to invisible and wireless fences we will answer this question as if you are using a shock collar to keep your dog inside your fence.

How to adjust the strength of a dog collar?

For all models use the following steps to adjust the strength to the proper setting: Start at the lowest setting. Place the collar on your dog. Take your dog to the invisible or wireless fence boundary.

How to set static correction level?

To set the static correction level press and hold the mode button again until you see a red light.

How to reset invisible fence?

Also, how do you reset an invisible fence transmitter? Resetting the system can be as simple as replacing the batteries in your transmitter. Bring your dog inside, and turn off the power to the fence. Unplug the transmitter. Look for metal objects around or on top of the fence.

Does Innotek IUC-4100 work with invisible fence?

For the most part there is no compatibility between brands. So the Innotek IUC-4100 collar will not work with any other system, and in particular will not work with an Invisible Fence system. The single exception is the SportDog and PetSafe. Invisible Fence denotes one brand of underground pet containment system.

Adjust the Invisible Fence Collar Strength

First of all, push the receiver button. The receiver light will flash, so after this, adjust the boundary area with the warning of the beep alarm and, in the end, change the metal probes of the receiver. If you want the best adjustment for your dog collar, so you must try to practice.

Change the shock on my Invisible Fence Collar

Moreover, If you are above the level and setting the beep mode, press the button for five seconds will increase once more. Collar indicates that the correction levels are according to your desire; if you want a lower correction level, so pressing the button, then the level will come back.

What level should you set for your shock Collar

When you start your dog training, you should not use the static correction level during the training. Use treats and precise to teach the boundary of Invisible or Best Wireless Dog Fence to your dog. You can start the lowest setting during the training, find those Pet Safe Collar Setting that does not hurt your dog.

Receiver Collar

Suppose your Invisible fence collar is not working. Firstly check that the Invisible Fence is blinking greenlights or not, remove the collar from your dog’s neck, and check that the collar battery is installed correctly or not. Further, please remove the battery from the collar and install it again.

Boundary wire

Sometimes when your Invisible fence wire breaks without any reason and your transmitter or collar do not work correctly. Then find the issue in the wire some time, you cannot find the problem successfully. Hence, change this piece of wire that may die and start your dog collar again.

Fence Transmitter

In some cases, your fence transmitter may not work, so check the plug of your transmitter or change the plug and solve the issue.

Changing signals

You can install the fence transmitter, and collar in your garden or home to face the signals issue that the transmitter does not send a full signal to your collar and the collar does not work correctly.

How snug should an invisible fence collar be?

The Invisible Fence collar should be snug enough to slide only one finger between a correction post and your pet’s skin. Remember to adjust the fit of the collar as your pet’s coat, weight, and age change. Your pet’s coat may change from season to season.

How to contact invisible fence?

Bring your Invisible Fence Brand transmitter and Computer Collar Receiver with you to your new home and contact us at 866-804-1250 to install new boundary wire, flag your property and re-train your pet (s) to their new boundaries. To request a service appointment online, click here.

Why does my invisible fence beep?

These can be caused by digging too deep when working in the yard, burrowing animals, and even the weather. The most important thing to know is that your fence will NOT contain your pets when there is a wire break, so you should not let your pets outside until the issue is resolved. To set up a service call for a wire break, call 866-804-1250 or request a service appointment from your local dealer online by clicking here.

How to schedule a service appointment for invisible fence?

Request a service appointment online by clicking here or by calling us at 866-804-1250. At your service appointment, our Technician will test your entire system including the control panel, lightning and surge protection, Computer Collar Receivers, indoor units, and underground wire. We will provide a complete system analysis and make any necessary repairs to your Invisible Fence system.

Is invisible fence CE compliant?

CE - All Invisible Fence products sold within the European Economic Area (EEA) are CE compliant and bare the CE mark.

Can you put invisible fence wire on an existing fence?

Yes! Invisible Fence system boundary wire can be installed along an existing fence for reinforcement from digging, jumping, or getting out of an open gate. Our Pet Safety Professionals can aid you in the design of your system.

Can you use an invisible fence on a multi pet home?

Yes! Invisible Fence is the perfect solution for multi-pet homes. When used in conjunction with our MicroLite Computer Collar receivers, the Shields Indoor Solutions can be customized for multiple pets. You can keep one pet outside while allowing another to enter, you can separate food bowls, or you can even keep a certain pet off the couch – the options are endless. Learn more about Shields Multi-Pet Solutions.