How do I adjust my hunter prs40? Insert the plastic key finish of the Hunter wrench into the adjustment socket. While conserving the nozzle turret at the right forestall, flip the wrench clockwise.
How does the prs40 work?
This technology and water savings is brought to life in the PRS40. This efficient watering tool combines the rugged Pro-Spray body and replaces the traditional nozzle with a MP Rotator. Regulated at 40PSI, the Pro-Spray PRS40 ensures the optimum output pressure to achieve maximum efficiency.
What PSI is the prs40 pressure regulator?
To optimize MP Rotator performance, the PRS40 is pressure-regulated to 40 PSI. Hunter’s revolutionary MP Rotators use multi-stream technology to deliver accurate streams of water with superior uniformity.
How do you adjust the arc adjustment ring on a hunter riser?
The Hunter Pro-Spray two piece ratcheting riser will allow you to align the riser by twisting in either direction after MP Rotator is tightened. With the MP Rotator operating and in the pop-up position, rotate the Arc Adjustment Ring.
How do I adjust the radius of my Hunter nozzles?
The radius, or distance the water sprays on Hunter Nozzles can be adjusted by turning the center screw on top of the nozzle. This will increase or decrease the radius.
How do you adjust Pro Spray prs40?
1:464:08Hunter PS Ultra & Pro Spray Sprinklers - How to adjust Arc and ...YouTubeStart of suggested clipEnd of suggested clipIf you need to reduce the radius. Turn the screw clockwise. If. You need to reach a little farther.MoreIf you need to reduce the radius. Turn the screw clockwise. If. You need to reach a little farther. Turn it the opposite direction or counterclockwise.
How do you adjust Hunter sprinkler spray distance?
Insert the steel hex end of the Hunter wrench into the radius adjustment screw.Turn the screw clockwise (into the stream of water) to decrease the radius, or counterclockwise to increase the radius. Radius can be reduced by up to 25%.
How do you adjust the range on a Hunter sprinkler head?
0:181:44How to adjust a Hunter PGP sprinkler head - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd you turn it counterclockwise to make it. And that go as far that way and you turn it towards A+MoreAnd you turn it counterclockwise to make it. And that go as far that way and you turn it towards A+ to make it go further that way and a little bit of a turn will make quite a bit of difference.
How do I adjust my Hunter Pro adjustable nozzle?
The adjustable left edge of the spray pattern is marked with a raised dot on top of the nozzle's arc adjusting ring.Hold both sides of the nozzle at a point below the top adjusting ring.Turn the top adjusting ring counterclockwise to increase the arc or clockwise to decrease the arc.
How do you adjust an automatic sprinkler head?
When you have the sprinkler going, use a flat-head screwdriver to rotate the adjustment screw found on the top of the nozzle. If you need to increase the width of the spray pattern, turn the screw counterclockwise. If you want to decrease it, turn the small screw clockwise.
How do you use an adjustable spray nozzle?
0:061:17Adjustable Hose Nozzle Video Instructions OnHow To Use NozzleYouTubeStart of suggested clipEnd of suggested clipBefore turning on your water make sure to twist the nozzle all the way to the left to the offMoreBefore turning on your water make sure to twist the nozzle all the way to the left to the off position. As. You start to twist you'll notice the spray pattern starts out as a fine mist.
What is Hunter Pro spray?
Hunter Pro-Spray line can handle the harshest environments and pressure, and still perform as needed. Pressure regulated models provide new opportunities for extraordinary water savings.
What is a pressure regulated spray?
The pressure-regulated Pro-Spray® PRS30 and PRS40 meet the stringent requirements established by the U.S. Environmental Protection Agency to identify products that exemplify water conservation and performance.
What is a pro spray shut off cap?
The Pro-Spray shut-off cap maintains a clean look for any landscape when capping off a Pro-Spray.
What is a pro spray?
The Pro-Spray line incorporates a heavy-duty ribbed body and durable cap engineered to withstand the harshest environments, including the rigors of foot traffic and the abuses of heavy machinery. In addition, the buttress thread design provides superior strength in cap-to-body gripping capacity helping the head to withstand high inlet surge pressures.
How to adjust spray pattern?
Align the right side of the spray pattern to the desired point. Hold the perimeter of the nozzle with your fingers and turn the nozzle counterclockwise to increase the arc. To decrease the arc hold the perimeter of the nozzle and turn the top adjustment ring clockwise. ADJUSTING THE LEFT SIDE OF THE ARC. The adjustable left edge of the spray ...
What is the arc of Hunter Pro adjustable nozzle?
Hunter Pro Adjustable Nozzles come from the factory with the arc preset at 25 degrees.
How many feet is a Hunter nozzle?
NOTE: Hunter offers fixed nozzle radius sizes from 5, 8, 10, 12, 15 and 17 feet as well as short radius nozzles from 2, 4 and 6 feet. The adjustable nozzles are offered in radius of 4, 6, 8, 10, 12, 15 and 17 feet.
How to reduce radius of nozzle?
To decrease the radius, hold the top of the nozzle edge using your hand. Next, turn the screw in the clockwise direction using a small flathead screwdriver. If you need to reduce the radius more than 25%, install a smaller radius nozzle for this location.
How to adjust MP rotator?
MP Rotator - Adjusting the Radius and Arc 1 Install the MP Rotator with the Left Edge Indicator (flat side of nozzle) pointing to the left side of the desired watering pattern. The Hunter Pro-Spray two piece ratcheting riser will allow you to align the riser by twisting in either direction after MP Rotator is tightened. 2 With the MP Rotator operating and in the pop-up position, rotate the Arc Adjustment Ring. Turning the Arc Adjustment Ring clockwise will increase the arc, counter clockwise will decrease the arc.
Which way to turn arc adjustment ring?
Turning the Arc Adjustment Ring clockwise will increase the arc, counter clockwise will decrease the arc. Note: Adjustment can be done with the MP Rotator Tool (MPTOOL) or by hand.
How to install MP rotator?
Install the MP Rotator with the Left Edge Indicator (flat side of nozzle) pointing to the left side of the desired watering pattern. The Hunter Pro-Spray two piece ratcheting riser will allow you to align the riser by twisting in either direction after MP Rotator is tightened.
What is the operating pressure of a sprinkler?
A consistent operating pressure greater than > 55 PSI (3.7 BAR) shortens the life of the sprinkler, increases rotation speed, reduces sprinkler uniformity and voids the trade warranty.
Does MP rotator shut off?
To prevent damage during adjustment, the MP Rotator does not completely shut off like a spray nozzle. To achieve maximum radius reduction with any MP Rotator model use a 30 PSI (2 BAR) regulating spray body.
