- Insert the plastic key end of the Hunter wrench into the adjustment socket
- While holding the nozzle turret at the right stop, turn the wrench counterclockwise. Each full 360° turn of the wrench will decrease the arc 90°.
- Adjust to any arc between 40° and 360°. The PGP Ultra is adjustable from 5-360 degrees.
- The wrench will stop turning, or there will be a ratcheting noise, when the minimum arc of 40° has been reached.
How to adjust Hunter sprinkler heads without key?
How to adjust hunter sprinkler heads without key. Turn your irrigation system on and. Factory setting is for full radius, and the radius can be reduced by 25%. You should also adjust the sprinkler head arc to avoid spraying water on. Adjust the sprinklers to water the lawn in the direction you want and to use the volume of water you want.
How to adjust a hunter rotary sprinkler head?
- Turn your sprinkler system on and stand behind the rotor you want to adjust. ...
- Rotate the head all the way to the left to finish any cycle the rotor may be doing.
- Apply pressure to the top of the rotor head and turn it all the way to the right until it stops. ...
- Locate the PLUS and MINUS signs on the top of the rotor head. ...
How to adjust Hunter irrigation sprinkler heads?
To adjust the arc, follow these steps:
- Insert the hunter key in the adjustment socket. ...
- Once you have inserted the key, turn it clockwise and complete one whole circle while turning it. ...
- After turning the key a full circle four times, the key will not allow you to rotate it any further. ...
How to adjust Hunter PGP gear drive rotor?
- Professional grade 3/4 In. inlet rotor, ideal for residential landscape applications
- 4 inch pop-up clears the turf to allow the water to be distributed without being blocked
- Adjustable arc of 40° - 360° allows for full use in all applications
How do you adjust PGP Ultra Hunter sprinklers?
The PGP Ultra is adjustable from 5-360 degrees....Insert the plastic key end of the Hunter wrench into the adjustment socket .While holding the nozzle turret at the right stop, turn the wrench clockwise. ... Adjust to any arc between 40° and 360°.More items...•
How do I change the distance on my Hunter PGP?
0:232:28How to adjust the arc and radius of a Hunter PGP Sprinkler - YouTubeYouTubeStart of suggested clipEnd of suggested clipSimply install the allen wrench. Into the raised arrow. And clockwise spins the screw. Down in frontMoreSimply install the allen wrench. Into the raised arrow. And clockwise spins the screw. Down in front of the nozzle to deflect the spray.
How do you adjust Hunter PGP rotors?
0:443:35How To Adjust A Hunter PGP Rotor Head - YouTubeYouTubeStart of suggested clipEnd of suggested clipIf the rotor tool is a little bit too hard to turn what we'll do is stick the regular screwdriver inMoreIf the rotor tool is a little bit too hard to turn what we'll do is stick the regular screwdriver in we'll go minus. And we'll check it again. Now we've got the head dry adjusted to a 90 degrees.
How do you adjust the arc on a Hunter PGP sprinkler head?
0:302:49Hunter PGP - SRM Rotor Sprinklers - How to adjust Arc and RadiusYouTubeStart of suggested clipEnd of suggested clipSimply install the allen wrench into. The raised arrow. And clockwise spins the screw down in frontMoreSimply install the allen wrench into. The raised arrow. And clockwise spins the screw down in front of the nozzle to deflect the spray or.
How do you adjust Hunter sprinkler spray distance?
1:263:48Hunter Spray Adjustments and Maintenance - YouTubeYouTubeStart of suggested clipEnd of suggested clipIf you need to reduce the radius. Turn the screw clockwise. If. You need to reach a little farther.MoreIf you need to reduce the radius. Turn the screw clockwise. If. You need to reach a little farther. Turn it the opposite direction or counterclockwise.
How do I adjust the sprinkler radius?
0:411:50Rain Bird T-Bird Rotors: Arc and Radius Adjustment - YouTubeYouTubeStart of suggested clipEnd of suggested clipMake sure the sprinkler is rotating clockwise then push down on the nozzle. And while still pushingMoreMake sure the sprinkler is rotating clockwise then push down on the nozzle. And while still pushing down turn it clockwise to the additional degrees desired.
How to rotate a nozzle turret?
Using the palm of your hand, rotate the turret counterclockwise to the left stop to complete any interrupted rotation cycle. Rotate the nozzle turret clockwise to the right stop , this is the fixed side of the arc. The nozzle turret must be held in this position for arc adjustments. .
What is a Hunter rotor wrench?
The Hunter adjustment wrench consists of a 3/32 Allen key, two convenient finger loops for gripping, and an opposite side arc adjustment key for all your Hunter rotor adjustments. The Hunter wrench can be purchased from your local distributor. You can also use a 3/32 Allen key for radius adjustment only.
What is a 90 degree arc on a sprinkler?
Arc: The degrees of coverage of a sprinkler from one side of pattern to the other. A 90-degree arc would be a quarter-circle sprinkler. In other words, the arc is how far to the left and to the right the sprinkler will be ...
What happens if the right side of the turret is not aligned?
If the right side of the arc is not properly aligned, the results may be a wet walkway or a dry turf area. The right side arc can easily be realigned. NOTE: Prior to making the right side adjustment, make sure the top turret is reset. Rotate the turret all the way clockwise, then counterclockwise back to the right stop. FAQs.
How to realign arc on sprinkler?
There are two ways to easily realign the right arc position: Turn the whole sprinkler body assembly and the fitting below it to the desired position. (You may first need to remove some soil around the sprinkler to allow you to grip the sprinkler housing). Turn the body cap counterclockwise and remove the internal assembly from the body .
