How do I adjust a Rain Bird 42sa sprinkler head?
- Find and set the fixed LEFT edge. First, turn the center cap of the rotor all the way to the right until it stops. ...
- Adjust the arc pattern. The arc is preset to rotate 180º or a half circle.
- Adjust the spray distance. With the water on or off, you can adjust the distance of throw.
Full Answer
How to adjust a rainbird sprinkler head?
1 Set the Fixed Edge. The fixed edge on a Rain Bird 42SA sprinkler head is on the left as you stand behind it. ... 2 Increase or Decrease the Arc. When you buy them, Rain Bird 42SA sprinkler heads are set at an arc of 180 degrees, a half circle. ... 3 Adjust the Radius. ... 4 Fine Tuning the Sprinklers. ...
What are Rain Bird 42sa sprinkler heads set at?
When you buy them, Rain Bird 42SA sprinkler heads are set at an arc of 180 degrees, a half circle. This is the correct setting for a sprinkler head that sits along the edges of your lawn so it waters the lawn in front of the sprinkler only.
How do I adjust the fixed edge on a rain bird 42sa?
The fixed edge on a Rain Bird 42SA sprinkler head is on the left as you stand behind it. Turn the center cap on the rotor top to the right until it stops and then to the left until it stops, to set the left, fixed edge. To align the starting point for the water, turn the entire body of the rotary sprinkler to align the nozzle with the fixed edge.
How do I adjust the spray distance on my Rain Bird?
The spray distance on Rain Bird models is 19 to 32 feet (5.8 to 9.8 m). If you want the distance to be any higher or shorter, you will need to change the rotor nozzles or adjust the water pressure. Method 2 Adjusting the Spray Pattern
How do you adjust Rainbird rotating sprinkler heads 42SA?
0:432:34How to Adjust a Rainbird 42Sa - YouTubeYouTubeStart of suggested clipEnd of suggested clipCreate the left edge by moving the center cap all the way to the right until it can't move anyMoreCreate the left edge by moving the center cap all the way to the right until it can't move any further then twist it to the left until it stops.
How do you adjust the spray distance on a Rainbird 42SA?
0:001:06How to adjust the distance on Rain Bird rotor sprinklers - YouTubeYouTubeStart of suggested clipEnd of suggested clipUsing a flat bladed screwdriver. Turn the radius reduction screw here at the point of the largeMoreUsing a flat bladed screwdriver. Turn the radius reduction screw here at the point of the large arrow. I can to find where the water comes out to decrease the spray distance up to 25%.
How do you adjust Rain Bird Sprinkler heads?
1:051:59How To Adjust A Rain Bird 5000 Series Rotor - YouTubeYouTubeStart of suggested clipEnd of suggested clipStop insert the tool into the arc adjustment hole until it seats then turn the tool in theMoreStop insert the tool into the arc adjustment hole until it seats then turn the tool in the appropriate. Direction clockwise to increase the arc. And counterclockwise to decrease.
How do you adjust a rotating sprinkler head?
0:001:51Adjusting Rotary Type Sprinkler Heads | Massey Services - YouTubeYouTubeStart of suggested clipEnd of suggested clipUse the radius adjustment. Finally you'll need to adjust the distance of the spray. To do this turnMoreUse the radius adjustment. Finally you'll need to adjust the distance of the spray. To do this turn the adjustment screw clockwise until it's touching the water stream.
How do you adjust the spray distance on a pop up sprinkler?
0:040:36Spray Sprinkler - How to Adjust the Throw Distance - YouTubeYouTubeStart of suggested clipEnd of suggested clipUsing a small screwdriver adjust the spray head's throw distance by turning the center screw toMoreUsing a small screwdriver adjust the spray head's throw distance by turning the center screw to reduce the throw distance by up to 25.
How to change arc on sprinkler head?
You can change the arc by inserting a small flat-head screwdriver into the arc adjustment screw on top of the sprinkler head and turning it clockwise to the + or counterclockwise to the - to increase or decrease the arc. The full arc adjustment of 360 degrees means the water will spray in a full circle. Compare Bank Accounts | SmartAsset.com.
What is the radius of a rain bird sprinkler?
The radius of a sprinkler is how far the water travels from the sprinkler head. Rain Bird has it pre-set for maximum radius, but inserting a flat-head screwdriver into the radius reduction screw and turning it counterclockwise reduces the radius up to 25 percent.
Where is the fixed edge on a Rainbird 42SA?
The fixed edge on a Rain Bird 42SA sprinkler head is on the left as you stand behind it. Turn the center cap on the rotor top to the right until it stops and then to the left until it stops, to set the left, fixed edge. To align the starting point for the water, turn the entire body of the rotary sprinkler to align the nozzle with the fixed edge.
What is Rain Bird 42SA?
Rain Bird manufactures gear-driven rotor sprinklers designed for quiet operation in home irrigation systems. The 42SA model is part of the Simple Adjust series that requires no special tools to fine-tune how much water it delivers and where. Arc adjustments are from 40 to 360 degrees and the distance of throw can be reduced by 25 percent.
How do I adjust a sprinkler head?
If the water is off, you'll have to lift the sprinkler head out of its casing with a flat-head screwdriver and hold it out while you make the adjustment.
How to fix a sprinkler head that is left?
Turn the rubber rotor cap on the top of the sprinkler head all the way to the right, then turn it left as far as it will go. This fixes the left edge of the rotation.
How far can a sprinkler spray?
It can water in a complete circle or in an arc as small as 40 degrees, and the spray can reach from 26 to 38 feet. Both the arc and spray distance are adjustable. You can also change the nozzle to regulate the volume of water that the sprinkler emits as well as the width of the spray pattern.
How to adjust rainbird sprinkler head?
To adjust your Rainbird sprinklers, twist the spray head to the right or left if you want to change the water's direction . To reduce the spray distance, use a flat-bladed screwdriver to turn the screw on the nozzle clockwise.
How to adjust watering direction on sprinkler?
Move the sprinkler head by hand to adjust the watering direction. Grip the spray head between two fingers. Then, rotate it by hand so it is aimed at the direction you want the water to spray. For example, if you want the water to spray towards the right, rotate the head to the right.
How to adjust spray distance?
You can have the water on or off when you adjust the spray distance, though it may be easier with the water off. Take a flat-bladed screwdriver and place it on the center screw on the head.
How to increase spray pattern on sprinkler?
To increase the spray pattern, move the threaded collar to the left. To decrease the spray pattern, move the threaded collar to the right. Adjust the spray pattern while the sprinkler is on so you can determine how much of an increase or decrease you want. Adjusting the spray pattern is useful if you want to water a certain area ...
What is rain bird sprinkler?
Rain Bird sprinklers are a common brand of outdoor sprinklers that you can use on your lawn or in your garden. These sprinklers can be adjusted in several different ways to control the distance and amount of water that is distributed. You can change the watering direction and distance on the sprinklers. You can also adjust the spray pattern ...
How far does a rain bird spray?
It should sit just in front of the nozzle so the head is secure. The spray distance on Rain Bird models is 19 to 32 feet (5.8 to 9.8 m). If you want the distance to be any higher or shorter, you will need to change the rotor nozzles or adjust the water pressure.
Can you change the sprinkler nozzle?
This will make changing the sprinkler nozzle easier. You may want to change the sprinkler nozzle if it stops working properly. You can also remove the nozzle and check the filter screen if the water dribbles or does not spray properly. You can then clean it or change it.
What to do if sprinkler head is blocked?
Sprinkler Head is blocked with Debris: If the head does release water according to the chosen pattern, remove the head from the PVC pipe. Flush water into the nozzle and the filter to clean thoroughly. If the spray pattern does not work after cleaning, consider replacing your nozzle.
Why does my sprinkler head spray water?
Problem 1: Head sprays water to a shorter distance than it is supposed to. This may happen due to several reasons: Low Water Pressure in Your Property: If you have low water pressure, having too many sprinkler-heads, the water will not reach greater distances.
How to fix a clogged PVC filter?
Use a pair of pliers to unscrew the head. Remove the head from the PVC pipe. Take out the old nozzle. Remove the old filter mesh screen. Clean the head properly to remove the clogs and deposits. Insert and fix the new filter mesh screen. Fix the new nozzle turn clockwise to tighten.
How to fix a nozzle tree?
Remove and separate the nozzle tree from the rotor. Choose the desired nozzle from the tree. Lift up the rotor’s stem. Insert the nozzle into the rotor stem and press tightly to fix properly. Use a flat screwdriver to twist the radius reduction screw to retain the nozzle in a proper position.
Do you need to adjust rain bird sprinkler heads?
For this, you need to adjust the sprinkler head correctly and check if it working properly. In this article, we will dive in to explain some quick DIY tips on how to adjust Rain Bird sprinkler heads ...
