How do I add a link to my relic watch band? Relic Link Pin Watch Bands. Look at the last link on the side of the band without the watch clasp. Note the small pin that joins the last link to the link next to it. Use a link pin removal tool, or a thumbtack, to push out the link pin that holds the last watch link in place. Click to see full answer.
How do I adjust the links on my relic watch?
Spread an optical cleaning cloth over a flat work surface to protect the face of your Relic watch during link adjustment. Look at the last link on the side of the band without the watch clasp. Note the small pin that joins the last link to the link next to it.
How do I add more links to my watch band?
To add more links, line up a link with the links on the band. Place a pin through the hole, attaching the new link to the band. Tap the link against a tabletop or workbench to secure it firmly in place. Close the band when it's the desired length.
Are relic watch bands adjustable?
Manufactured by Fossil, Relic brand watches provide wearers with fashionable, user-friendly watches at affordable prices. If your Relic watch band is too big, you may not have to take it to a jeweler to have it adjusted. Many Relic watch models feature wearer-adjustable bands.
How do you remove the link from a watch band?
Find the links on the side of the band without the watch clasp. Note the small tab in the center of each watch link. Use an optical-size flat-head screwdriver to pry up the center tab of the last watch link. Lift the tab to open the small clasp that secures the last link to its neighboring link.
How do I add a link to my watch band?
Start by adding your extra links to the shorter side of the watch band and if you end up adding more than one link, be sure to add links to both sides of the clasp so it will stay centered on your wrist. If you have previously removed links from your watch band, find the extra links and pins that you removed.
Can you get a link added to a watch?
You can take your watch to a Fossil store or any reputable jeweler to have the links added to your watch. *If you are located elsewhere, you will need to contact your local service center to inquire about purchasing links for your watch.
How do you add or remove links on a watch?
Method 1: By using a pin pusherPlace the watch on the table with the push pins facing up.Insert the pin pusher into the hole and push the pin firmly.Once you've pushed the pin enough, it will pop out. Use pliers to remove it together with the link.Repeat the steps until you've removed the number of desired links.
How can I resize my watch without a tool?
0:376:09Remove Watch Links with Thumb Tacks | How To No Tools - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo what I'm going to do is simply tap put place the thumbtack. Right in the hole. And actually tapMoreSo what I'm going to do is simply tap put place the thumbtack. Right in the hole. And actually tap it with the underside of a screwdriver.
What are the different types of watch pins?
Those three individual kinds of pins comprise the regular release, lever, and screw type. The regular release type pin that fastens the watch band to the wristwatch is long enough to be slipped in through the looped ends of the band.
How do you change the links on a watch?
0:423:09How To Easily Remove a Watch Link - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo basically all that's holding these links together are pins inside of this inside of the links. SoMoreSo basically all that's holding these links together are pins inside of this inside of the links. So all we're gonna do is pop them out and take out a few links. And we're golden.
How do you shorten a metal watch band?
How to shorten a stretch watch band:Remember to work on soft ground.Take a small flat screwdriver and place it between a pin on the side of the watch band.Then remove the pins upwards.When that's done, you also remove the pin on the other side of the band in the same way.Remove some links or add some.More items...
How do you remove links from a watch band?
Remove Links Place the watch in the holder or on the foam with the arrows are facing downwards. Using the hammer, lightly tap the end of the push-pin tool over the cotter pins until you can no longer push the pin inside the link. When the pin pops through, remove it using your fingers or a small set of pliers.
Who makes the Relic watch?
Manufactured by Fossil, Relic brand watches provide wearers with fashionable, user-friendly watches at affordable prices. If your Relic watch band is too big, you may not have to take it to a jeweler to have it adjusted. Many Relic watch models feature wearer-adjustable bands.
How to get the last link of a watch?
Use an optical-size flat-head screwdriver to pry up the center tab of the last watch link. Lift the tab to open the small clasp that secures the last link to its neighboring link.
How to remove a watch link pin?
Use a link pin removal tool, or a thumbtack, to push out the link pin that holds the last watch link in place . Repeat the process to remove additional links, as needed.
Can you adjust a relic watch band?
Many Relic watch models feature wearer-adjustable bands. In most cases , even the Relic watch bands that weren't intended to be adjusted by the wearer can be adjusted at home with the right tools.
How to add more links to a band?
To add more links, line up a link with the links on the band. Place a pin through the hole, attaching the new link to the band. Tap the link against a tablet op or workbench to secure it firmly in place. Close the band when it's the desired length. You can close the band by placing a pin through the hole that exists where the open ends ...
How to get pin out of watch band?
Use the pliers to grasp the pin that’s partially hanging out of the watch. Be sure to completely remove the pin from the watch link. The band should now have an opening, but all of the links will still be attached to the band.
Why is it important to get a watch sized correctly?
When you buy a new watch, it’s important to get it sized correctly to avoid slippage and discomfort. If the watch has a linked band, links on the band can be added or removed to make the watch looser or tighter.
How far can a watch move?
Try on the watch to see if it’s too loose or tight on your wrist. Optimally, the watch should be able to move about a quarter of an inch up and down. However, it shouldn’t be able to spin around your wrist completely.
How to squeeze a watchband?
Squeeze both sides of the watchband together by grasping the area close to the clasp. Count the number of links that need to removed or added.
Can you remove a watch link without pins?
As you go further toward the face of the watch, the links might not have pins. The pieces without pins can’t be removed. Place the screwdriver tip or hole punch against the pin of the link you want to remove, or where you want to add a link.
How many inches does a link add to a watch bracelet?
Each link adds approximately ½ an inch to the watch bracelet. The pins required to attach the links together will be included.
How to order extra links for FG watch?
Extra links for your watch can be ordered by calling FG Services at 1-800-842-8621. Please have the following ready:
Where is the style number on a watch?
Your watch's style number (located on the back of your watch , e.g. ES1234 or FTW1234).
