Receiving Helpdesk

how deep should a sump pump basin be

by Prof. Omer Block Published 3 years ago Updated 3 years ago

Most sump pumps and basins should be installed 3 feet deep but the exact depth depends on your local soil conditions and the amount of floodwater you expect to receive. Deeper pits can collect more water but will require a more powerful pump to drain all the water before overflowing the pit.

Full Answer

How deep should a sump pump be?

The sump is about two feet deep, and the float is adjusted such that there can be 18" or so of standing water in the sump before the pump turns on. It isn't uncommon for there to be 12" of water in the sump for a week at a time, without the pump running.

Can you drill holes in a sump pump basin?

If you choose to drill holes in the basin, make sure the holes are smaller than the "solids handling rating" of the pump (generally 1/4 in. to 1/2 in. How often should sump pump run after heavy rain?

Do I need a sump basin for my basement?

Now, a dampproof coating, drainage system, and sump basin are all required in most jurisdictions. Many jurisdictions also require a pump to be installed in the basin to discharge water that collects around the foundation. The challenge with basements is that they are essentially a hole in the ground.

What size should a sump pump discharge line be?

This discharge line should be sized according to the pump manufacturer's recommendations. Most sump pumps have a recommended discharge size of 1.5 inches. The line must be run to the outside of the house. Many homeowners want the pipe connected to their sewer, but this is against code.

Can a sump pit be too deep?

If your sump pit reaches deep below the floor, then it's gathering much more water than it needs to – and it's forcing your pump to work longer and harder to pump water out. This will unnecessarily shorten the life of your system, increase the likelihood of overheating, and cost you extra on your electric bill.

How do you size a sump pump basin?

To calculate how many gallons flow into the basin per minute (system capacity), use the following rules of thumb: With an 18-inch-diameter basin, one inch of water is equal to one gallon. In the larger 24-inch-diameter basin, one inch of water is roughly equal to two gallons.

How low should a sump pump drain be?

It should be down to around the 2-3" level inside.

How deep should I bury sump pump discharge line?

0:462:57We tend to have a lot of clay in our soils. The french drain is a perforated pipe. So it increasesMoreWe tend to have a lot of clay in our soils. The french drain is a perforated pipe. So it increases the surface area and allows that water to drain into the ground even if the soil is not particularly.

Should I drill holes in my sump pump basin?

Yes – drilling sump pump basin holes is almost always needed! If you choose to skip drilling these holes you risk the basin 'floating' in the pit. This can cause damage to the pump as well as broken drain lines!

How deep should a sewage basin be?

If you are digging an entirely new pit, consider how much space you want that pit to take up. In our example, we are working with a simplex system, so we know that you need a basin of at least 24 inches (we'll stick with the minimum for simplicity's sake).

Should you bury sump pump discharge pipe?

This is most commonly from the pipe freezing, and the discharge will return to working order as soon as the pipe thaws. One of the best ways to avoid most of these potential issues is to bury the discharge underground in a suitable location in the yard.

Where should I run my sump pump discharge?

WHERE SHOULD MY SUMP PUMP WATER GO? Run your sump pump drainage away from your home. Do not let it flow onto driveways, sidewalks or other paved surfaces. Discharge must be clear, clean water such as ground water or residential air conditioner condensate.

How long can a sump pump drain line be?

Using a properly sized pipe for discharge will ensure that the sump pump will perform as the manufacturer intended. Installing discharge pipe of a larger size is not a huge problem and is in fact recommended for longer runs of pipe, typically 20 feet or more.

Will a sump pump line freeze?

If the water can't flow throughout your house, it's more likely that any water inside your sump pump will freeze. If there is any frozen water inside your sump pump, it can cause the sump pump to buckle under the pressure and cease working.

How do I build a sump pump drain field?

0:051:05Water it's the way we do all our French drains. We had two parallel pipes connected on both endsMoreWater it's the way we do all our French drains. We had two parallel pipes connected on both ends with a balance tube in the middle. There finishing putting the sod on top of the system right now.

How do I run a sump pump water discharge outside my house?

2:215:51We put gravel at the end of our trench. We're going to use that for some additional drainage.MoreWe put gravel at the end of our trench. We're going to use that for some additional drainage.

How high should sump water be?

The water in your sump pit needs to be no more than 2-3 inches, this is enough to keep your pump happy and make sure it works properly when you need it to.

Where is the sump pump located?

The sump pump sits in the sump pit which is at the lowest point of your home. Choose a suitable spot in your basement, either a corner that the water runs towards or your preferred spot. You’ll need to have power to the area in order to run the pump and you’ll need to have access to outside, the water being pumped out of your home needs ...

What is a sump pit?

The sump pit is basically a trench in your home that houses the sump pump. This pump is designed to remove water in a flooding situation, effectively preventing the house from becoming flooded.

What is the most important thing about a pump?

But, the most important thing is that the water level doesn’t reach the exit part of the pump. In fact, you’ll need to set the water level in your pit according to the float valve. The float valve is what tells the pump to come on. In order for it to work properly, you’ll need to have water at the bottom of your pit.

Can a flood pump work if it is covered with water?

Don’t forget that the best pumps for these situations are those that can work effectively when submerged. A pump that is designed to remove flood water should still be able to work if it is covered with water.

Does sump pump wick water upwards?

But, it also ensures the water does not wick upwards, giving you a damp floor. But, you do need to test it regularly to ensure it works, you can do this by pouring a bucket of water into your sump pit.

Do septic tanks need to be checked?

The septic tank basin must be checked out regularly. The septic tank pump likewise needs to have to become evaluated periodically to guarantee it is operating appropriately. The septic tank pump should certainly not release water onto the pavement and garage to avoid treacherous ice.

Can you winterize a sump pump?

If your sump pump discharge is above ground, winterizing it isn’t a problem. Just make sure to empty the pump before freezing weather sets in, and keep the area where the water drains clear of ice from that point onward.

How big of a discharge line for sump pump?

Most sump pumps have a recommended discharge size of 1.5 inches. The line must be run to the outside of the house. Many homeowners want the pipe connected to their sewer, but this is against code. City officials clarify that they will not allow rainwater to be pumped into the sewer, as wastewater has to be treated.

How much does it cost to install a sump pump?

The cost of installing a high-quality pump is usually around $350- 500 if there is an existing sump basin.

What happens if you discharge water right next to the foundation?

If you discharge water right next to the foundation, it will just cycle back into the sump pump and may overwhelm the system, causing a flooded basement. If the grade in the area doesn't drain away from the house, you will have the same issue of recycling water, or you will end up with a swamp in your yard.

Why is the buried portion of a pipe needed to be double the diameter of the rest of the discharge line?

This is because the pipe underground relies on gravity to drain and needs more room to travel more slowly.

How does a water line get buried?

The line can get buried by mulch, dirt, or grass. This happens whether it is buried or not, but it is a good practice to check the end of the discharge every time you mow your lawn to ensure this doesn't happen. The line can freeze or get buried by snow, causing it to block the water flow.

Can a sump pump run into a septic system?

Since discharges can't be run into sewer or septic systems, the only option is to run them out into your yard. A professional sump pump installer will work with you to determine a good location for the discharge to exit your home and end up pumping the water to a place where it can run off efficiently.

Is a sump pump necessary for a basement?

Ultimately, a sump pump is a very affordable insurance policy against a flooded basement and is highly recommended. If you don't have one, you should consider having one installed. BEFORE: Code requires a sump basin and sometimes a sump pump. This is a typical sump pump set up as installed during the construction of a home.

image
A B C D E F G H I J K L M N O P Q R S T U V W X Y Z 1 2 3 4 5 6 7 8 9
8.3.21PHP Version4.26sRequest Duration2MBMemory UsageGET {post}Route
  • warninglog[03:37:43] LOG.warning: Creation of dynamic property Barryvdh\Debugbar\DataFormatter\QueryFormatter:...
  • warninglog[03:37:43] LOG.warning: Creation of dynamic property Barryvdh\Debugbar\DataFormatter\QueryFormatter:...
  • warninglog[03:37:43] LOG.warning: Callables of the form ["Swift_SmtpTransport", "Swift_Transport_EsmtpTranspor...
  • warninglog[03:37:43] LOG.warning: Creation of dynamic property Barryvdh\Debugbar\DataFormatter\SimpleFormatter...
  • warninglog[03:37:43] LOG.warning: Creation of dynamic property Barryvdh\Debugbar\DataFormatter\SimpleFormatter...
  • warninglog[03:37:44] LOG.warning: json_decode(): Passing null to parameter #1 ($json) of type string is deprec...
  • warninglog[03:37:44] LOG.warning: json_decode(): Passing null to parameter #1 ($json) of type string is deprec...
  • warninglog[03:37:44] LOG.warning: json_decode(): Passing null to parameter #1 ($json) of type string is deprec...
  • warninglog[03:37:44] LOG.warning: json_decode(): Passing null to parameter #1 ($json) of type string is deprec...
  • Booting (33.15ms)
  • Application (4.23s)
  • 1 x Application (99.2%)
    4.23s
    1 x Booting (0.78%)
    33.15ms
    7 templates were rendered
    • themes.DevBlog.content.post (resources/views/themes/DevBlog/content/post.blade.php)34blade
      Params
      0
      post
      1
      postContent
      2
      author
      3
      updated_at
      4
      bing_rich_snippet_text
      5
      bing_rich_snippet_link
      6
      bing_related_keywords
      7
      google_related_keywords
      8
      bing_news_title
      9
      bing_news_description
      10
      bing_videos
      11
      bing_images
      12
      bing_search_result_title
      13
      bing_search_result_description
      14
      bing_search_result_url
      15
      bing_paa_questions
      16
      bing_paa_answers
      17
      bing_slider_faq_questions
      18
      bing_slider_faq_answers
      19
      bing_pop_faq_questions
      20
      bing_pop_faq_answers
      21
      bing_tab_faq_questions
      22
      bing_tab_faq_answers
      23
      google_faq_questions
      24
      google_faq_answers
      25
      google_rich_snippet
      26
      google_search_result
      27
      indexedArray
      28
      total_images
      29
      total_videos
      30
      settings
      31
      url_current
      32
      menus
      33
      sidebar
    • themes.DevBlog.layouts.master (resources/views/themes/DevBlog/layouts/master.blade.php)41blade
      Params
      0
      __env
      1
      app
      2
      errors
      3
      post
      4
      postContent
      5
      author
      6
      updated_at
      7
      bing_rich_snippet_text
      8
      bing_rich_snippet_link
      9
      bing_related_keywords
      10
      google_related_keywords
      11
      bing_news_title
      12
      bing_news_description
      13
      bing_videos
      14
      bing_images
      15
      bing_search_result_title
      16
      bing_search_result_description
      17
      bing_search_result_url
      18
      bing_paa_questions
      19
      bing_paa_answers
      20
      bing_slider_faq_questions
      21
      bing_slider_faq_answers
      22
      bing_pop_faq_questions
      23
      bing_pop_faq_answers
      24
      bing_tab_faq_questions
      25
      bing_tab_faq_answers
      26
      google_faq_questions
      27
      google_faq_answers
      28
      google_rich_snippet
      29
      google_search_result
      30
      indexedArray
      31
      total_images
      32
      total_videos
      33
      settings
      34
      url_current
      35
      menus
      36
      sidebar
      37
      i
      38
      __currentLoopData
      39
      loop
      40
      item
    • themes.DevBlog.panels.head (resources/views/themes/DevBlog/panels/head.blade.php)41blade
      Params
      0
      __env
      1
      app
      2
      errors
      3
      post
      4
      postContent
      5
      author
      6
      updated_at
      7
      bing_rich_snippet_text
      8
      bing_rich_snippet_link
      9
      bing_related_keywords
      10
      google_related_keywords
      11
      bing_news_title
      12
      bing_news_description
      13
      bing_videos
      14
      bing_images
      15
      bing_search_result_title
      16
      bing_search_result_description
      17
      bing_search_result_url
      18
      bing_paa_questions
      19
      bing_paa_answers
      20
      bing_slider_faq_questions
      21
      bing_slider_faq_answers
      22
      bing_pop_faq_questions
      23
      bing_pop_faq_answers
      24
      bing_tab_faq_questions
      25
      bing_tab_faq_answers
      26
      google_faq_questions
      27
      google_faq_answers
      28
      google_rich_snippet
      29
      google_search_result
      30
      indexedArray
      31
      total_images
      32
      total_videos
      33
      settings
      34
      url_current
      35
      menus
      36
      sidebar
      37
      i
      38
      __currentLoopData
      39
      loop
      40
      item
    • themes.DevBlog.panels.header (resources/views/themes/DevBlog/panels/header.blade.php)41blade
      Params
      0
      __env
      1
      app
      2
      errors
      3
      post
      4
      postContent
      5
      author
      6
      updated_at
      7
      bing_rich_snippet_text
      8
      bing_rich_snippet_link
      9
      bing_related_keywords
      10
      google_related_keywords
      11
      bing_news_title
      12
      bing_news_description
      13
      bing_videos
      14
      bing_images
      15
      bing_search_result_title
      16
      bing_search_result_description
      17
      bing_search_result_url
      18
      bing_paa_questions
      19
      bing_paa_answers
      20
      bing_slider_faq_questions
      21
      bing_slider_faq_answers
      22
      bing_pop_faq_questions
      23
      bing_pop_faq_answers
      24
      bing_tab_faq_questions
      25
      bing_tab_faq_answers
      26
      google_faq_questions
      27
      google_faq_answers
      28
      google_rich_snippet
      29
      google_search_result
      30
      indexedArray
      31
      total_images
      32
      total_videos
      33
      settings
      34
      url_current
      35
      menus
      36
      sidebar
      37
      i
      38
      __currentLoopData
      39
      loop
      40
      item
    • themes.DevBlog.panels.navbar (resources/views/themes/DevBlog/panels/navbar.blade.php)41blade
      Params
      0
      __env
      1
      app
      2
      errors
      3
      post
      4
      postContent
      5
      author
      6
      updated_at
      7
      bing_rich_snippet_text
      8
      bing_rich_snippet_link
      9
      bing_related_keywords
      10
      google_related_keywords
      11
      bing_news_title
      12
      bing_news_description
      13
      bing_videos
      14
      bing_images
      15
      bing_search_result_title
      16
      bing_search_result_description
      17
      bing_search_result_url
      18
      bing_paa_questions
      19
      bing_paa_answers
      20
      bing_slider_faq_questions
      21
      bing_slider_faq_answers
      22
      bing_pop_faq_questions
      23
      bing_pop_faq_answers
      24
      bing_tab_faq_questions
      25
      bing_tab_faq_answers
      26
      google_faq_questions
      27
      google_faq_answers
      28
      google_rich_snippet
      29
      google_search_result
      30
      indexedArray
      31
      total_images
      32
      total_videos
      33
      settings
      34
      url_current
      35
      menus
      36
      sidebar
      37
      i
      38
      __currentLoopData
      39
      loop
      40
      item
    • themes.DevBlog.panels.footer (resources/views/themes/DevBlog/panels/footer.blade.php)41blade
      Params
      0
      __env
      1
      app
      2
      errors
      3
      post
      4
      postContent
      5
      author
      6
      updated_at
      7
      bing_rich_snippet_text
      8
      bing_rich_snippet_link
      9
      bing_related_keywords
      10
      google_related_keywords
      11
      bing_news_title
      12
      bing_news_description
      13
      bing_videos
      14
      bing_images
      15
      bing_search_result_title
      16
      bing_search_result_description
      17
      bing_search_result_url
      18
      bing_paa_questions
      19
      bing_paa_answers
      20
      bing_slider_faq_questions
      21
      bing_slider_faq_answers
      22
      bing_pop_faq_questions
      23
      bing_pop_faq_answers
      24
      bing_tab_faq_questions
      25
      bing_tab_faq_answers
      26
      google_faq_questions
      27
      google_faq_answers
      28
      google_rich_snippet
      29
      google_search_result
      30
      indexedArray
      31
      total_images
      32
      total_videos
      33
      settings
      34
      url_current
      35
      menus
      36
      sidebar
      37
      i
      38
      __currentLoopData
      39
      loop
      40
      item
    • themes.DevBlog.panels.scripts (resources/views/themes/DevBlog/panels/scripts.blade.php)41blade
      Params
      0
      __env
      1
      app
      2
      errors
      3
      post
      4
      postContent
      5
      author
      6
      updated_at
      7
      bing_rich_snippet_text
      8
      bing_rich_snippet_link
      9
      bing_related_keywords
      10
      google_related_keywords
      11
      bing_news_title
      12
      bing_news_description
      13
      bing_videos
      14
      bing_images
      15
      bing_search_result_title
      16
      bing_search_result_description
      17
      bing_search_result_url
      18
      bing_paa_questions
      19
      bing_paa_answers
      20
      bing_slider_faq_questions
      21
      bing_slider_faq_answers
      22
      bing_pop_faq_questions
      23
      bing_pop_faq_answers
      24
      bing_tab_faq_questions
      25
      bing_tab_faq_answers
      26
      google_faq_questions
      27
      google_faq_answers
      28
      google_rich_snippet
      29
      google_search_result
      30
      indexedArray
      31
      total_images
      32
      total_videos
      33
      settings
      34
      url_current
      35
      menus
      36
      sidebar
      37
      i
      38
      __currentLoopData
      39
      loop
      40
      item
    uri
    GET {post}
    middleware
    web, checkdate
    as
    post.show
    controller
    App\Http\Controllers\Frontend\json_data\PostController@show
    namespace
    where
    file
    app/Http/Controllers/Frontend/json_data/PostController.php:18-166
    7 statements were executed4.2s
    • select * from `posts` where `published_at` <= '2025-06-24 03:37:44' and `slug` = 'how-deep-should-a-sump-pump-basin-be' and `posts`.`deleted_at` is null limit 1
      2.89ms/app/Providers/RouteServiceProvider.php:54receivinghelpdeskask
      Metadata
      Bindings
      • 0. 2025-06-24 03:37:44
      • 1. how-deep-should-a-sump-pump-basin-be
      Backtrace
      • 15. /app/Providers/RouteServiceProvider.php:54
      • 18. /vendor/laravel/framework/src/Illuminate/Routing/Router.php:842
      • 19. Route binding:39
      • 20. /vendor/laravel/framework/src/Illuminate/Pipeline/Pipeline.php:167
      • 21. /vendor/laravel/framework/src/Illuminate/Foundation/Http/Middleware/VerifyCsrfToken.php:78
    • select * from `json_post_contents` where `json_post_contents`.`post_id` = 187656 and `json_post_contents`.`post_id` is not null and `rewrite_id` = 0
      4.94msmiddleware::checkdate:30receivinghelpdeskask
      Metadata
      Bindings
      • 0. 187656
      • 1. 0
      Backtrace
      • 19. middleware::checkdate:30
      • 20. /vendor/laravel/framework/src/Illuminate/Pipeline/Pipeline.php:167
      • 21. /vendor/laravel/jetstream/src/Http/Middleware/ShareInertiaData.php:61
      • 22. /vendor/laravel/framework/src/Illuminate/Pipeline/Pipeline.php:167
      • 23. /vendor/laravel/framework/src/Illuminate/Routing/Middleware/SubstituteBindings.php:50
    • select * from `nova_menu_menus` where `slug` = 'header' limit 1
      390μs/vendor/outl1ne/nova-menu-builder/src/helpers.php:32receivinghelpdeskask
      Metadata
      Bindings
      • 0. header
      Backtrace
      • 15. /vendor/outl1ne/nova-menu-builder/src/helpers.php:32
      • 17. /vendor/laravel/framework/src/Illuminate/Routing/Controller.php:54
      • 18. /vendor/laravel/framework/src/Illuminate/Routing/ControllerDispatcher.php:45
      • 19. /vendor/laravel/framework/src/Illuminate/Routing/Route.php:261
      • 20. /vendor/laravel/framework/src/Illuminate/Routing/Route.php:205
    • select * from `nova_menu_menu_items` where `nova_menu_menu_items`.`menu_id` = 1 and `nova_menu_menu_items`.`menu_id` is not null and `parent_id` is null order by `parent_id` asc, `order` asc, `name` asc
      440μs/vendor/outl1ne/nova-menu-builder/src/Models/Menu.php:35receivinghelpdeskask
      Metadata
      Bindings
      • 0. 1
      Backtrace
      • 19. /vendor/outl1ne/nova-menu-builder/src/Models/Menu.php:35
      • 20. /vendor/outl1ne/nova-menu-builder/src/helpers.php:33
      • 22. /vendor/laravel/framework/src/Illuminate/Routing/Controller.php:54
      • 23. /vendor/laravel/framework/src/Illuminate/Routing/ControllerDispatcher.php:45
      • 24. /vendor/laravel/framework/src/Illuminate/Routing/Route.php:261
    • select * from `nova_menu_menu_items` where `nova_menu_menu_items`.`parent_id` in (1) order by `order` asc
      300μs/vendor/outl1ne/nova-menu-builder/src/Models/Menu.php:35receivinghelpdeskask
      Metadata
      Backtrace
      • 24. /vendor/outl1ne/nova-menu-builder/src/Models/Menu.php:35
      • 25. /vendor/outl1ne/nova-menu-builder/src/helpers.php:33
      • 27. /vendor/laravel/framework/src/Illuminate/Routing/Controller.php:54
      • 28. /vendor/laravel/framework/src/Illuminate/Routing/ControllerDispatcher.php:45
      • 29. /vendor/laravel/framework/src/Illuminate/Routing/Route.php:261
    • select `id`, `post_title`, `slug` from `posts` where `status` = 'publish' and `posts`.`deleted_at` is null order by RAND() limit 10
      4.19s/app/View/Composers/SidebarView.php:22receivinghelpdeskask
      Metadata
      Bindings
      • 0. publish
      Backtrace
      • 14. /app/View/Composers/SidebarView.php:22
      • 15. /app/View/Composers/SidebarView.php:12
      • 16. /vendor/laravel/framework/src/Illuminate/View/Concerns/ManagesEvents.php:124
      • 17. /vendor/laravel/framework/src/Illuminate/View/Concerns/ManagesEvents.php:162
      • 20. /vendor/laravel/framework/src/Illuminate/View/Concerns/ManagesEvents.php:177
    • select * from `fake_users` where `fake_users`.`id` = 11244 limit 1
      1.06msview::2dd102cf0462e89a4d4d8bc77355d767652bf9aa:15receivinghelpdeskask
      Metadata
      Bindings
      • 0. 11244
      Backtrace
      • 21. view::2dd102cf0462e89a4d4d8bc77355d767652bf9aa:15
      • 23. /vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:108
      • 24. /vendor/laravel/framework/src/Illuminate/View/Engines/PhpEngine.php:58
      • 25. /vendor/livewire/livewire/src/ComponentConcerns/RendersLivewireComponents.php:69
      • 26. /vendor/laravel/framework/src/Illuminate/View/Engines/CompilerEngine.php:61
    App\Models\FakeUser
    1
    Outl1ne\MenuBuilder\Models\MenuItem
    1
    Outl1ne\MenuBuilder\Models\Menu
    1
    App\Models\JsonPostContent
    1
    App\Models\Post
    11
        _token
        B40I8ZRnhIgsT91UdNWur77HDDaq1Uc6gxdDDUQT
        _previous
        array:1 [ "url" => "https://receivinghelpdesk.com/ask/how-deep-should-a-sump-pump-basin-be" ]
        _flash
        array:2 [ "old" => [] "new" => [] ]
        PHPDEBUGBAR_STACK_DATA
        []
        path_info
        /how-deep-should-a-sump-pump-basin-be
        status_code
        200
        
        status_text
        OK
        format
        html
        content_type
        text/html; charset=UTF-8
        request_query
        []
        
        request_request
        []
        
        request_headers
        0 of 0
        array:24 [ "cf-ipcountry" => array:1 [ 0 => "US" ] "cf-connecting-ip" => array:1 [ 0 => "216.73.216.237" ] "cdn-loop" => array:1 [ 0 => "cloudflare; loops=1" ] "sec-fetch-site" => array:1 [ 0 => "none" ] "accept" => array:1 [ 0 => "text/html,application/xhtml+xml,application/xml;q=0.9,image/avif,image/webp,image/apng,*/*;q=0.8,application/signed-exchange;v=b3;q=0.7" ] "user-agent" => array:1 [ 0 => "Mozilla/5.0 AppleWebKit/537.36 (KHTML, like Gecko; compatible; ClaudeBot/1.0; +claudebot@anthropic.com)" ] "upgrade-insecure-requests" => array:1 [ 0 => "1" ] "sec-ch-ua-platform" => array:1 [ 0 => ""Windows"" ] "sec-ch-ua-mobile" => array:1 [ 0 => "?0" ] "sec-ch-ua" => array:1 [ 0 => ""Chromium";v="130", "HeadlessChrome";v="130", "Not?A_Brand";v="99"" ] "cache-control" => array:1 [ 0 => "no-cache" ] "pragma" => array:1 [ 0 => "no-cache" ] "sec-fetch-dest" => array:1 [ 0 => "document" ] "cf-ray" => array:1 [ 0 => "95474ccaf903ee11-ORD" ] "accept-encoding" => array:1 [ 0 => "gzip, br" ] "priority" => array:1 [ 0 => "u=0, i" ] "sec-fetch-user" => array:1 [ 0 => "?1" ] "sec-fetch-mode" => array:1 [ 0 => "navigate" ] "cf-visitor" => array:1 [ 0 => "{"scheme":"https"}" ] "connection" => array:1 [ 0 => "close" ] "x-forwarded-proto" => array:1 [ 0 => "https" ] "x-forwarded-for" => array:1 [ 0 => "216.73.216.237, 172.70.179.58" ] "x-server-addr" => array:1 [ 0 => "154.12.239.204" ] "host" => array:1 [ 0 => "receivinghelpdesk.com" ] ]
        request_server
        0 of 0
        array:55 [ "USER" => "runcloud" "HOME" => "/home/runcloud" "SCRIPT_NAME" => "/ask/index.php" "REQUEST_URI" => "/ask/how-deep-should-a-sump-pump-basin-be" "QUERY_STRING" => "" "REQUEST_METHOD" => "GET" "SERVER_PROTOCOL" => "HTTP/1.0" "GATEWAY_INTERFACE" => "CGI/1.1" "REDIRECT_URL" => "/ask/how-deep-should-a-sump-pump-basin-be" "REMOTE_PORT" => "49318" "SCRIPT_FILENAME" => "/home/runcloud/webapps/ReceivingHelpDesk/ask/index.php" "SERVER_ADMIN" => "you@example.com" "CONTEXT_DOCUMENT_ROOT" => "/home/runcloud/webapps/ReceivingHelpDesk/" "CONTEXT_PREFIX" => "" "REQUEST_SCHEME" => "http" "DOCUMENT_ROOT" => "/home/runcloud/webapps/ReceivingHelpDesk/" "REMOTE_ADDR" => "172.70.179.58" "SERVER_PORT" => "80" "SERVER_ADDR" => "127.0.0.1" "SERVER_NAME" => "receivinghelpdesk.com" "SERVER_SOFTWARE" => "Apache/2.4.63 (Unix) OpenSSL/1.1.1f" "SERVER_SIGNATURE" => "" "LD_LIBRARY_PATH" => "/RunCloud/Packages/apache2-rc/lib" "PATH" => "/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin" "HTTP_CF_IPCOUNTRY" => "US" "HTTP_CF_CONNECTING_IP" => "216.73.216.237" "HTTP_CDN_LOOP" => "cloudflare; loops=1" "HTTP_SEC_FETCH_SITE" => "none" "HTTP_ACCEPT" => "text/html,application/xhtml+xml,application/xml;q=0.9,image/avif,image/webp,image/apng,*/*;q=0.8,application/signed-exchange;v=b3;q=0.7" "HTTP_USER_AGENT" => "Mozilla/5.0 AppleWebKit/537.36 (KHTML, like Gecko; compatible; ClaudeBot/1.0; +claudebot@anthropic.com)" "HTTP_UPGRADE_INSECURE_REQUESTS" => "1" "HTTP_SEC_CH_UA_PLATFORM" => ""Windows"" "HTTP_SEC_CH_UA_MOBILE" => "?0" "HTTP_SEC_CH_UA" => ""Chromium";v="130", "HeadlessChrome";v="130", "Not?A_Brand";v="99"" "HTTP_CACHE_CONTROL" => "no-cache" "HTTP_PRAGMA" => "no-cache" "HTTP_SEC_FETCH_DEST" => "document" "HTTP_CF_RAY" => "95474ccaf903ee11-ORD" "HTTP_ACCEPT_ENCODING" => "gzip, br" "HTTP_PRIORITY" => "u=0, i" "HTTP_SEC_FETCH_USER" => "?1" "HTTP_SEC_FETCH_MODE" => "navigate" "HTTP_CF_VISITOR" => "{"scheme":"https"}" "HTTP_CONNECTION" => "close" "HTTP_X_FORWARDED_PROTO" => "https" "HTTP_X_FORWARDED_FOR" => "216.73.216.237, 172.70.179.58" "HTTP_X_SERVER_ADDR" => "154.12.239.204" "HTTP_HOST" => "receivinghelpdesk.com" "HTTPS" => "on" "REDIRECT_STATUS" => "200" "REDIRECT_HTTPS" => "on" "FCGI_ROLE" => "RESPONDER" "PHP_SELF" => "/ask/index.php" "REQUEST_TIME_FLOAT" => 1750716463.9616 "REQUEST_TIME" => 1750716463 ]
        request_cookies
        []
        
        response_headers
        0 of 0
        array:7 [ "content-type" => array:1 [ 0 => "text/html; charset=UTF-8" ] "cache-control" => array:1 [ 0 => "private, must-revalidate" ] "date" => array:1 [ 0 => "Mon, 23 Jun 2025 22:07:44 GMT" ] "pragma" => array:1 [ 0 => "no-cache" ] "expires" => array:1 [ 0 => -1 ] "set-cookie" => array:2 [ 0 => "XSRF-TOKEN=eyJpdiI6IldWZ3pGbGN5MTlsZERnRC91ZFE3dFE9PSIsInZhbHVlIjoiNGtiUXBkMW1xdVd3dUpEV1JBZ21qODBMV2ViL2VieWVXcVFORGdKOGxJaHZhYWYycFJFNERiL09vUXZ3b29iVnBJN2NSQkZJcDB3VzJKUHlBS3NsVjJRZlVkT3FtT29BSm9MR09xczl5MHpVZ1BqalNWU0l0cGtRb2V5WGhxcUMiLCJtYWMiOiI5MzU3ODNmMzM1OWE4N2MxOTQ4MDhhZTgwNWVjM2JiNWJmNjk4NTEyNjQzMTQxM2Q3YzVmZGRlMGE4ODFlOTc2IiwidGFnIjoiIn0%3D; expires=Tue, 24-Jun-2025 00:07:48 GMT; Max-Age=7200; path=/; samesite=laxXSRF-TOKEN=eyJpdiI6IldWZ3pGbGN5MTlsZERnRC91ZFE3dFE9PSIsInZhbHVlIjoiNGtiUXBkMW1xdVd3dUpEV1JBZ21qODBMV2ViL2VieWVXcVFORGdKOGxJaHZhYWYycFJFNERiL09vUXZ3b29iVnBJN2NSQ" 1 => "askhelpdesk_session=eyJpdiI6IkllK0U1bG1KS3FSU1VJUWZSUUdiN2c9PSIsInZhbHVlIjoiK0RGbXBZK0hyT0RlMFhPb0ZXWFArOWkvY0tTSkRCcHpmaHF6QXJvUlRFN1ZOZFNZdU0wYVBLMzd3Q3h4VjVEbjV6N2oraVQ2OHFEbnB6NitvTFYrTVBKd3VBckhUSmJJMUhxWXJONjJtekEwY2RqOGNYVUNtdVV1dSt3b1VERU0iLCJtYWMiOiJhMjA4NzA3OTQ3MGVhZjFkYzViOWEyMTI2YmYwMjliMjRhNjk0MWQyY2VhYTBlOWY0MjUyMzA0NTRlMTEwMmZmIiwidGFnIjoiIn0%3D; expires=Tue, 24-Jun-2025 00:07:48 GMT; Max-Age=7200; path=/; httponly; samesite=laxaskhelpdesk_session=eyJpdiI6IkllK0U1bG1KS3FSU1VJUWZSUUdiN2c9PSIsInZhbHVlIjoiK0RGbXBZK0hyT0RlMFhPb0ZXWFArOWkvY0tTSkRCcHpmaHF6QXJvUlRFN1ZOZFNZdU0wYVBLMzd3Q3h4VjVE" ] "Set-Cookie" => array:2 [ 0 => "XSRF-TOKEN=eyJpdiI6IldWZ3pGbGN5MTlsZERnRC91ZFE3dFE9PSIsInZhbHVlIjoiNGtiUXBkMW1xdVd3dUpEV1JBZ21qODBMV2ViL2VieWVXcVFORGdKOGxJaHZhYWYycFJFNERiL09vUXZ3b29iVnBJN2NSQkZJcDB3VzJKUHlBS3NsVjJRZlVkT3FtT29BSm9MR09xczl5MHpVZ1BqalNWU0l0cGtRb2V5WGhxcUMiLCJtYWMiOiI5MzU3ODNmMzM1OWE4N2MxOTQ4MDhhZTgwNWVjM2JiNWJmNjk4NTEyNjQzMTQxM2Q3YzVmZGRlMGE4ODFlOTc2IiwidGFnIjoiIn0%3D; expires=Tue, 24-Jun-2025 00:07:48 GMT; path=/XSRF-TOKEN=eyJpdiI6IldWZ3pGbGN5MTlsZERnRC91ZFE3dFE9PSIsInZhbHVlIjoiNGtiUXBkMW1xdVd3dUpEV1JBZ21qODBMV2ViL2VieWVXcVFORGdKOGxJaHZhYWYycFJFNERiL09vUXZ3b29iVnBJN2NSQ" 1 => "askhelpdesk_session=eyJpdiI6IkllK0U1bG1KS3FSU1VJUWZSUUdiN2c9PSIsInZhbHVlIjoiK0RGbXBZK0hyT0RlMFhPb0ZXWFArOWkvY0tTSkRCcHpmaHF6QXJvUlRFN1ZOZFNZdU0wYVBLMzd3Q3h4VjVEbjV6N2oraVQ2OHFEbnB6NitvTFYrTVBKd3VBckhUSmJJMUhxWXJONjJtekEwY2RqOGNYVUNtdVV1dSt3b1VERU0iLCJtYWMiOiJhMjA4NzA3OTQ3MGVhZjFkYzViOWEyMTI2YmYwMjliMjRhNjk0MWQyY2VhYTBlOWY0MjUyMzA0NTRlMTEwMmZmIiwidGFnIjoiIn0%3D; expires=Tue, 24-Jun-2025 00:07:48 GMT; path=/; httponlyaskhelpdesk_session=eyJpdiI6IkllK0U1bG1KS3FSU1VJUWZSUUdiN2c9PSIsInZhbHVlIjoiK0RGbXBZK0hyT0RlMFhPb0ZXWFArOWkvY0tTSkRCcHpmaHF6QXJvUlRFN1ZOZFNZdU0wYVBLMzd3Q3h4VjVE" ] ]
        session_attributes
        0 of 0
        array:4 [ "_token" => "B40I8ZRnhIgsT91UdNWur77HDDaq1Uc6gxdDDUQT" "_previous" => array:1 [ "url" => "https://receivinghelpdesk.com/ask/how-deep-should-a-sump-pump-basin-be" ] "_flash" => array:2 [ "old" => [] "new" => [] ] "PHPDEBUGBAR_STACK_DATA" => [] ]