Full Answer
How much does a million gallons of water weigh?
• At 8.34 pounds per gallon, a million gallons comes in at 8,340,000 pounds. • At 1 kilogram per liter, 3,785,412 liters comes in at 3,785,412 kilograms. Below are science topics related to water use. Water is everywhere, which is fortunate for all of humanity, as water is essential for life.
How much area would a billion gallons of water cover?
A million gallons will put an inch of water on about 40 acres of farmland. So a billion gallons will cover about 60 square miles, and a trillion would cover 60,000 square miles. That much water would raise the Great Salt Lake by less than 3 ft. I say less because the lake would cover more area, as more water was added.
How many gallons of water are there in the world?
Something like 326,000,000,000,000,000,000 gallons (326 million trillion gallons) of the stuff (roughly 1,260,000,000,000,000,000,000 liters) can be found on our planet. What does 100 000 gallons of water look like?
What is the closest unit to 1 trillion gallons of water?
For a point of reference here, one metric tonne is 1000kg or about 2200 pounds making it very close to an American ton. I think this might be the closest unit in both 1 trillion US gallons is less than 0.9 cubic mile of water. This is a bit more than a trillionth of the volume of the Earth, so not that big.
What does one million gallons of water look like?
You would need to build a pool about 267 feet long (almost as long as a football field), 50 feet wide, and 10 feet deep. The cube on the right side shows you that 1 million gallons would form a cube that is 51.1 feet on each side. Some helpful conversions: 1 Mgal/d = 1.547 cubic feet per second.
How large is a million gallon tank?
Additional InformationGallons1000000Diameter74.3Eve Height31.11Overall Height FT.38.9ManufacturerSteelCore Tanks16 more rows
What holds a million gallons of water?
large swimming poolA large swimming pool can hold a million gallons of water. U.S. Geological Survey. A .
What does 100 000 gallons of water look like?
So what do 100,000 Gallons look like? 100,000 gallons is 20 semi tanks that can hold 5,000 gallons each. 100,000 gallons is 1,066,667 Solo Cups filled at the 12oz mark. That's also 53,333 games of beer pong.
How much does a 1 million gallon tank cost?
Hood estimates, based on the Steel Tank Institute and Steel Plate Fabricators Association's total cost of ownership tool, that a 1-million-gallon welded steel ground tank would cost $626,750, a bolted steel tank of the same size would cost $1.14 million, and the same size concrete tank would cost $2.14 million.
How many gallons of water are in Lake Michigan?
one quadrillion gallonsLake Michigan alone holds approximately 1,200 cubic miles of water, equivalent to one quadrillion gallons of water. That's how vast it is! According to satellite measurements, one would need to drain the lake for about 400 billion gallons to decrease its water level by one inch.
How many gallons is in the ocean?
352 quintillion gallonsThe ocean contains 352 quintillion gallons of water! Water enters the ocean from rivers and melting ice and leaves the ocean into the atmosphere through evaporation.
How much water is in the biggest pool in the world?
66 million US gallonsWith a massive volume of 66 million US gallons (just under 250 million liters), the world's biggest swimming pool (by volume) is often claimed to be found in the San Alfonso Del Mar Resort in Chile.
How many gallons is Olympic pool?
about 660,000 gallonsIt turns out that Olympic swimming pools have some pretty specific dimensions. They are 50 meters long, 25 meters wide, and 2 meters deep. In terms of volume, when full, these pools hold 2.5 million liters of water or about 660,000 gallons.
How big is a 50000 gallon tank?
A 50,000 gallon factory coated bolted steel tank is 33 feet in diameter and 8 feet high.
How big is a 100000 gallon cistern?
100000 Gallon SteelCore Corrugated Bolted Steel Tank with dimensions of 30.11 feet in diameter and 21.3 High.
How much water is in 1 trillion gallons?
1 trillion US gallons is less than 0.9 cubic mile of water.
How much water would a billion gallons of water cover?
A million gallons will put an inch of water on about 40 acres of farmland. So a billion gallons will cover about 60 square miles, and a trillion would cover 60,000 square miles. That much water would raise the Great Salt Lake by less than 3 ft. I say less because the lake would cover more area, as more water was added.
How many liters are in a cubic meter?
We can fit ten forward-backwards, ten up-down and ten left-right in a cubic meter, holding 1000 liters and massing one tonne.
How many liters are in a gallon?
One (US) gallon is 3.78 liters. A British or Imperial gallon is 4.4 liters. The easiest thing to do with this number is just make one side of our cube grow and make a rectangle. So we have a rectangle 3,78 kilometers by 1 km by 1 km.
How many miles high is a trillion?
A Billion is a 33 story building of $100 bills piled up. and a Trillion is 63 miles high!!
How much is a metric ton?
For a point of reference here, one metric tonne is 1000kg or about 2200 pounds making it very close to an American ton. I think this might be the closest unit in both systems.
