A tiled file surround
- A tiled fire surround is usually fixed to the wall by screws through metal lugs near the top on each side, often there...
- Clear the slots in the fixing screws of plaster and if possible remove them. If the fixings cannot be removed, try to...
- As the fixings are removed, get someone to steady the surround to prevent if falling.
How is a tiled fire surround fixed to the wall?
A tiled fire surround is usually fixed to the wall by screws through metal lugs near the top on each side, often there are also lugs towards the bottom; these will be hidden by the wall plaster.
Why is my fire surround stuck to the wall?
If you are removing a wooden fire surround, it is possible that it has been screwed to wooden battens attached to the wall. If this is the case, there will be screws along the outer sides of your fire surround, which might be covered with wood plugs or paint.
How to remove a fire surround from a room?
Use dustsheets to cover furniture that has to stay in the room. Fire surrounds can be heavy so you may want help lowering yours to the floor. Wear a face mask, safety goggles and gloves if you need to use a chisel and hammer to remove the fire surround. Step 2: Removing the old fire surround
How are fireplace surrounds attached to the wall?
Fireplace surrounds are typically hollow structures (as shown below) and so can be attached to the wall with metal brackets located at the edges of the surround, or even screwed onto another piece of wood that’s already joined to the wall.
Why do we need a fireplace surround?
What materials are used for fireplace surrounds?
What is a concrete surround?
What is a mantel in a fireplace?
Why are wood fireplace surrounds so popular?
What is a wood surround?
What can be used for an open fireplace?
See more
How do you attach a fireplace surround to the wall?
2:284:28How to Install a Fireplace Mantel (woodworking plans available)YouTubeStart of suggested clipEnd of suggested clipJust a small block. And then what you do is once this is secured the fireplace mantel comes back inMoreJust a small block. And then what you do is once this is secured the fireplace mantel comes back in then you drive a nail through the side into the blocking.
How do you remove a fire surround from the wall?
0:061:12How to remove a builder grade fireplace surround and mantleYouTubeStart of suggested clipEnd of suggested clipFind out where your nails or screws are and what you need to do. Then simply use a little bit ofMoreFind out where your nails or screws are and what you need to do. Then simply use a little bit of force. And pull it off the wall.
How do you secure a cast iron fireplace to the wall?
Attach a wooden baton to the wall inside these marks. ( make sure the baton is not to thick IE make sure the fireplace can still touch the wall. Using a metal drill put a small hole in the outside of each leg to line up with the batons. secure the fireplace to the wall using a countersunk self tapping screw.Dec 16, 2017
How are mantels attached to the wall?
How Are Fireplace Mantels Attached? Standalone floating fireplace mantels can either be attached to a wall using lag screws or installed onto a back board, while mantels as part of a complete fireplace surround may be screwed into the wall using brackets.Feb 3, 2021
How do you remove a fireplace insert surround?
To start removing one of these fireplace surrounds, you will have to chip away the plaster around the edge of the mantelpiece. This should reveal the lugs holding it to the wall. You can then go about removing the screws, which should start to release the surround from the wall.May 5, 2020
How are mantels attached to brick?
Attaching a mantel to brick is achieved through masonry rods and construction adhesives. You will want to ensure proper height for placing a mantel over your fireplace/ A moderate amount of adhesive is squeezed into each of the holes and a half-inch rebar support rod tapped in using a two-pound hammer.Jul 30, 2020
How do you repair a cast iron fireplace?
To restore a cast iron fireplace, you will need to follow these steps:Clean away any rust on the surface.Strip away old layers of paint.Repair any cracks by professional welding.Re-paint or polish as desired.May 20, 2020
How do you backfill a cast iron fireplace?
Generally, an insulating mixture composed of 6 parts of vermiculite and 1 part of cement is mixed. Alternatively, you can mix 4 parts broken bricks, 2 parts sand, and 1 part lime. Put the corrugated paper, cardboard, or strawboard around the lower back half of the fireback before you try to backfill.Jun 12, 2021
How much is a fireplace insert?
Table of ContentsAverage Gas Fireplace Insert CostAverage Cost$2,000Highest Cost$6,000+Lowest Cost$1,000Dec 22, 2021
How do you attach a mantel surround?
2:203:18Builders Choice Fireplace Leg, Skirt and Mantel Install - YouTubeYouTubeStart of suggested clipEnd of suggested clipDrive a minimum of three fasteners. Apply construction adhesive to the top of the mantel mounting.MoreDrive a minimum of three fasteners. Apply construction adhesive to the top of the mantel mounting.
How do you attach a mantel?
Slide Over Bolts MethodLocate the studs behind the brick, stone, or faux veneer.Drive 1/2in lag screws through each of the studs. ... Have a helper support the mantel while you mark the location of the support rods on the back of the beam. ... Apply construction adhesive into the holes. ... Slide into place, admire, and enjoy!
How do you install a fireplace insert?
0:493:55How to Install a Wood-Burning Fireplace Insert | This Old HouseYouTubeStart of suggested clipEnd of suggested clipThe inner portion is made out of stainless steel that's going to carry the flue products this willMoreThe inner portion is made out of stainless steel that's going to carry the flue products this will attach right onto the top of our insert. There's also an aluminum sheathing that's the outer pipe.
THE 15 BEST Fireplace Surrounds for 2022 | Houzz
Find the best Surround Fireplace Mantels for your home in 2022 with the carefully curated selection available to shop at Houzz. Whether you are looking for Surround Fireplace Mantels that can mix and match colors, materials, styles, or want Fireplace Mantels with a unique, one-of-a-kind feature, you’ll be able to find the perfect piece right here!
33 Fireplace Ideas That Make Brilliant Focal Points
In many period homes, living spaces are arranged around the fireplace — this is how the former owners used to keep warm, after all. This means it's an important part of your overall design to get right, whether it's now got a log burning stove, a gas or electric fire or no fire at all.
Is there a socket in an electric fire?
There is also a socket as well, if an electric fire is to be used - hard to see as its a black socket.
Can I use bonding to put plaster on MDF?
1 - I would of probably use bonding 1st coat plaster basically like cement. Doesn't have to be perfect just fill irregularities to get some sort of evenness to stick MDF to.
Can MDF be fixed to a mantel?
The MDF panel would have been easier to fix to the mantel before it was fixed to the wall, using screws. The inner portion is usually recessed to allow for this.
What is the most important thing when fitting a new fire surround?
The most important thing when fitting a new fire surround is to ensure you have the right size for your existing fire. The easiest thing to do is to measure up your existing surround and buy one that is the same size. The most important things to check are:
Why is the inner leg of a fire surround shorter than the outside?
This is done to take into account the projection of the back panel, which the surround will need to leave a little extra room for around the opening.
How to measure fireplace rebate?
Basically, to measure the fireplace rebate you need to measure the distance from the wall to the front of your back panel. This ensures that the outer leg of the fire surround sits flush against the wall, while the inside of the leg sits flush against the back panel. If for any reason your fireplace doesn’t have a back panel, ...
Can you remove an old fireplace surround?
If you have a more modern fireplace, such as a gas fire or electric fireplace rather than a period open fire, then removing an old fireplace surround shouldn’t be too difficult. However, it does require a little DIY skill to ensure you don’t make too much ...
Can you remove a fire surround with battens?
If you are removing a wooden fire surround, it is possible that it has been screwed to wooden battens attached to the wall.
Can a fireplace surround be attached to a wall?
As we have seen above, there are many different ways that a fireplace surround can be attached to the wall. The mantelpiece you choose will probably have specific instructions on how best to fit it from the manufacturer, or you might simply have to nip down to a local hardware store to find some fixings yourself.
What to wear to remove fire surround?
Wear a face mask, safety goggles and gloves if you need to use a chisel and hammer to remove the fire surround.
How to remove a hearth?
To remove the hearth, chisel away around the underside until you can get a crowbar underneath it. Then lever upwards to free the hearth.
How much sand to one part cement to one part lime?
Mix a mortar. Check the manufacturer's instructions but you should need about six parts sand to one part cement to one part lime.
Can you replace a fire surround?
Replacing a fire surround is a tricky task, so get some expert help from Homebase . Use the guide to achieve the finish you want for your space. Learn more now.
Do you need a flue for an electric fire?
You don't need a flue for an electric fire. But a gas fire needs a brick chimney, precast flue or a prefabricated flue. If there's no existing flue, and the fire is going on an outside wall, you can install a balanced-flue gas fire contained behind glass or a rear fan-flued gas fire that's open-fronted.
Can marble back panel be fixed to wall?
Place the back panel centrally on the hearth and screw it to the wall with the fixings supplied. A marble back panel can't be fixed to the wall on a permanent basis.
Do you need a seal between a fire surround and a wall?
You need an effective seal between the wall and the new fire surround. Always follow the manufacturer's instructions to get the right result.
How much weight can a stone fireplace hold?
Many of the stone pieces can exceed 50kg in weight and the mantel shelf may also have a significant overhang that projects forward of the lintel. Each stone forming the fireplace must have proper fixings to hold the stone in position against the wall.
Why does a fireplace shelf detach?
If the individual components aren’t designed to incorporate or include adequate fixings , or if they are not installed correctly – i.e. mechanically secured together and properly secured to the surrounding wall - it is possible for the mantel shelf to detach and topple over. This can be triggered by passive weight such as heavy items stored on the mantel or by a person pulling down or hanging from the projecting edge of the mantel as a child might do.
Why do fireplaces have surrounds?
Many fireplaces have a surround to help make them more of a focal point for a room. Some fireplaces have surrounds and mantels that are part of the structure of a fireplace, meaning that they can’t be removed without professional help or without incurring significant costs. Structural surrounds and mantels will typically be an extension ...
What happens if a fireplace surround doesn't come away?
If a fireplace surround won’t come away from the wall without brute force, then it may still be attached to the wall in another location.
What is a hollow surround fireplace?
Fireplace surrounds are typically hollow, meaning that they can either be attached to the wall directly or attached to something located behind the surround like another piece of wood. In the case of our fireplace surround, it was attached to the wall with two metal brackets that stuck up from behind the surround.
Where are the bolts on a fireplace mantle?
Bolts are screwed into the wall above the fireplace before a mantel is slotted straight onto it. A fireplace mantle may also be screwed onto a piece of a wood that is already attached to the wall. In this case any screws or nails may be located on top or beneath the mantel.
Where to find screws for mantel?
For a single mantel by itself without a surround, look for screws either on top of the mantle or underneath, near to the wall. For a fireplace surround, look for screws that are driven straight into the wall. The screws may be hidden behind plasterboard or pollyfilla to hide them from view, or can also be found on the inside or outside edges.
Where are the brackets on a fireplace?
There were two holes located in the wall above the fireplace where the metal brackets were situated. These metal brackets were screwed into the wall and covered by pollyfilla. Simply removing the pollyfilla from the wall gave us access to the brackets that were held against the wall with screws.
What is structural surround?
Structural surrounds and mantels will typically be an extension of the masonry material used within the house construction, or made from another type of masonry material.
How are fire surrounds secured?
Modern timber fire surrounds are often secured to the chimney breast using lugs on the side hidden behind the plaster. Old timber fire surrounds were often screwed to wooden battens fixed to the chimney breast.
What is a fire surround made of?
Start by checking that the fire surround is made from real brick or stone and not just thin brick or stone facings attached to a concrete backing. If it is just brick or stone facing, removal in the same as for a tiled surround above.
What is a raised hearth?
The raised hearth is bonded using mortar to a concrete slab (known as the constructional hearth) flush with the floor and projecting into the room.
What is a tile fire surround?
A tiled fire surround usually has a concrete backing to which the tiles are fixed and is screwed to the chimney breast through metal lugs, in the same manner as a cast-iron surround. The concrete means that the surround will be very heavy, and it is best to have someone else available to hold it steady and help move it away.
Where is a raised tile hearth?
Where a raised tile hearth is fitted, this will either be resting against the front of the surround, or the surround may rest on the back of hearth. If the hearth rests against the front of the surround, it needs to be removed first ( see below ).
Should a constructional hearth be left in place?
The constructional hearth should be left in place and self-leveling compound used if necessary to smooth the top before any floor covering is laid.
Can a hearth be bricked up?
A hearth, which may have been fitted with any of the above. Once a fire surround has been removed, the opening can be bricked up, or boarded up over a timber frame built across the front of the opening. Before the opening is closed up, the chimney should be swept and the top of the chimney capped by a builder.
Why do we need a fireplace surround?
Fireplace surrounds help to make a fireplace into more a feature and a focal point for a home, as well as providing a shelf space above the fireplace to allow you to decorate it with personal items.
What materials are used for fireplace surrounds?
Common materials that can be used for a fireplace surround include: Wood. Concrete. Brick.
What is a concrete surround?
Concrete surrounds can be found as either a traditional surround and mantel constructed as part of the fireplace (like ours) or can be part of a feature wall that may extend up to the ceiling to help provide more of a prominent and modern look.
What is a mantel in a fireplace?
The mantel consists of the top part of the fireplace surround that is commonly found to be flat on top so that ornaments and other decorations can be placed. A mantel can also be commonly bought as a standalone component to create a ‘floating mantelpiece’ look.
Why are wood fireplace surrounds so popular?
Wooden fireplace surrounds are common because of their ease of installation and affordability.
What is a wood surround?
Surrounds that aren’t part of the construction of a fireplace, in particular wooden surrounds, are typically attached to a wall with a number of brackets/lugs and screws located around the surround.
What can be used for an open fireplace?
Many existing open fireplaces can be constructed of a concrete mantel, legs and even hearth.
