Hot water heater prices Hot water heater prices are $300 to $1,800 on average for a tank unit and $300 to $2,100 for a tankless unit, without installation. Water heater prices depend on size, type, brand, and fuel source.
Full Answer
See more
What is the average cost of a water heater for a home?
Water Heater Costs On average, the cost to replace a water heater is $1,200, including the price of the new unit and labor. At the low end, bargain hunters can get it done for as little as $815.
What is the cost of a 50 gallon water heater?
The national average cost to replace a 50-gallon hot water heater is $1,100 to $2,800, with most people paying around $1,800 for a direct replacement of a 50-gallon gas hot water heater using the same model.
How much is a 40-gallon hot water heater?
A 40-gallon water heater effectively meets the needs of a home with two people, and it costs around $320 to $1,600. For homes with five people or more, you may need to consider a 75-gallon (average price of $900 to $3,000) or an 80-gallon (average price of $1,000 to $3,200) water heater.
How many years does a hot water heater last?
It would be nice to know when the time is right to replace your water before it springs a leak and causes an inconvenience or worse yet, damage to your home. Typically a residential hot water heater lasts between 6 and 13 years. Beyond 12 years, you are on borrowed time!
Which is better 40 or 50-gallon water heater?
50-gallon water heaters have a longer lifespan. In general, 40-gallon heaters last for about eight years, while 50-gallon heaters can last 12 years. This is because 50-gallon heaters have thicker tanks. As a result, they are less likely to develop leaks.
What brand of water heater is the most reliable?
Best & Most Reliable Water Heater Brands in the WorldA.O. Smith. ... Rheem. Rheem was founded in 1925 by two brothers, Donald and Richard Rheem – and with financial backing from a third brother, William. ... Kenmore. ... Bradford White. ... American Standard. ... American Water Heaters. ... Bosch. ... EcoSmart.More items...
How long should a 40-gallon water heater last?
For the most part, a 40-gallon water heater should last between 10 and 12 years. Some units come with a warranty, so you should check before buying. The following are a few signs that it may be time to replace your water heater: You are getting less hot water than normal.
How often should a hot water heater be replaced?
between eight and ten yearsHow Long Do Water Heaters Last. — The majority of water heaters last between eight and ten years. While ten is the age at which heater replacement is generally recommended, the actual need to replace a heater could arise before or after this timeline.
How much should I charge to install a water heater?
Depending on your selection, the average cost for water heater installation is between $1,000 to $3,000.
What are the signs your hot water heater is going out?
Rust deposits or a metallic odor coming out with hot water can signal either rusty pipes or rust inside the water heater. If corrosion is eating away the metal from the inside, leaks are inevitable. Murky water from the tap can also be signs that the water heater will fail soon.
Can a hot water tank last 20 years?
Most tank water heaters have an average lifespan of 8 to 12 years, and tankless water heaters can last as long as 20 years.
Should I replace my 15 year old water heater?
Anyway, you should consider replacing your water heater if it's about 6-12+ years old and when you start running out of hot water faster. However, age and lack of hot water aren't everything. You could have a 15-year-old water heater that works just fine and wouldn't need replacing.
How much does a high efficiency water heater cost?
High-efficiency water heaters cost $1,200 to $4,400 on average for the unit and installation. High-efficiency systems use less fuel to operate, create hot water quickly, and minimize heat loss, making them up to 300% more energy-efficient than standard tank water heaters.
How much does a solar water heater cost?
A solar water heater costs $3,000 to $9,000 installed or $1,500 to $6,600 after applying tax credits and rebates. Solar thermal systems use the sun for water heating, reducing energy costs by 50% to 80%. Solar water heaters can operate as hybrid water heating systems, working with electric or gas heaters.
How long is a water heater warranty?
Most tank water heater warranties last 6 to 12 years, depending on the brand. Tankless water heater warranties last 5 to 15 years. Extended warranties cost $40 for 2 years or $70 for 5 years and must be purchased with the water heater at the time of installation. Water heater warranty length.
How long does it take to install a tankless water heater?
Installing a tank water heater takes 2 to 6 hours, depending on accessibility. Tankless water heater installation takes 3 to 10 hours for a new install or 2 to 4 hours to replace an existing tankless unit. Replacing a water heater in an attic, closet, or other tight space increases the labor time.
How much does it cost to install a tankless water heater at Home Depot?
Home Depot charges $750 to $2,000 to install tank water heaters and $1,200 to $5,000 to install tankless water heaters. This cost includes the water heater, labor by a licensed plumber, permits, and old water heater removal.
How much does it cost to install a gas water heater?
Gas water heater installation costs $600 to $2,800 total for a standard tank or $700 to $4,600 for a tankless. Gas water heaters cost $100 to $700 more than electric up front, but cost $220 less per year to operate.
How much does an expansion tank cost for a water heater?
A water heater expansion tank costs $100 to $400, including installation. An expansion tank provides extra space to relieve the pressure inside the water heater and pipes. An expansion tank prevents damage and prolongs the life of the system.
Does Menards have a water heater?
Menards® offers a variety of water heaters for your home or commercial building. Never run out of hot water with one of our reliable water heaters. Our natural gas, propane, and electric tank-type residential water heaters will ensure that your home always has enough hot water for bathing, cleaning, and cooking.
Does Menards have a radiant heat boiler?
Menards® also has a variety of options for commercial buildings, including natural gas, propane, electric, and hot water storage tanks. Heat your home efficiently with one of our radiant heat boilers. They are available in natural gas, propane, and electric styles. We also offer a wide selection of radiant heat control panels.
How much energy does a water heater use?
According to statistics on Energy.gov, your water heater alone uses more energy than the rest of your entire household appliances combined. It accounts for a whopping 17% of your household’s total energy use. That’s a lot of energy!
How much of the water heater market was in 2009?
In 2009, they made up 97% of the water heater market. If you have a water heater in your household already, the chances are it’s one of these. As you’ve probably guessed based on the name, these water heaters consist of an insulated tank to store hot water, as well as a heating mechanism.
How much water does a tankless water heater hold?
Most tank water heaters will hold around 40 - 60 gallons of water. This matters because it’s an indication of how much water you’ll be able to access in a day.
What does GPM mean in tankless water heaters?
GPM stands for Gallons per Minute. As tankless water heaters don’t store any water (and as such, don’t have an FHR or capacity), this is the rating you’ll need to look at to work out if it provides enough water for your intended usage.
What type of fuel is used in a water heater?
This will depend a lot on what’s available and the cost of different fuel in your area. There are 6 main types of water heater fuels to consider: electricity, natural gas, propane, , oil, geothermal energy, and solar. Different types of water heaters are compatible with different types of fuels. This infographic shows you how different fuel type ...
What is the FHR rating on a tank heater?
FHR. A better metric than the capacity to measure how much water your tank heater can deliver is the First Hour Rating (FHR for short). The FHR will usually be given for storage water heaters, and it represents how many gallons of water it can deliver per hour.
What does BTU mean in water heaters?
BTU stands for British Thermal Unit. A BTU represents the amount of heat required in order to raise the temperature of a pound of water by one degree (F). The BTU rating represents how much heat the water heater can transfer to the water per hour.