Power the appliance down by turning off the circuit breaker (s) or unplugging for one (1) minute. Power the appliance up by turning on the circuit breaker (s) or plugging back in. Verify the operation of the control panel/display.
Full Answer
Why is my Hoover washing machine not spinning properly?
Hoover washing machine faults may include your Hoover washing machine not spinning. This could be due to the incorrect programme being selected – a quick wash programme, for example, will only do a low-speed spin and laundry may still feel wet at the end of the cycle.
Why are the lights flashing on my Hoover washing machine?
Restrictions in the pressure chamber and faulty pressure switches can also be culprits. Or there may be a wiring snag that will need advice from an electrician. Hoover washing machine e08 – or LED lights flashing eight times before pausing and repeating – indicates problems related to the motor and often the motor speed sensor.
Why is my washing machine touch screen not working?
Problems with the touch screen could indicate a problem with the washing machine's electronics. Resetting the washing machine's electronics can clear the errors causing the machine not to operate. To reset the washing machine, unplug the machine and wait for two minutes.
Where can I find answers to my Hoover appliance questions?
The Hoover advice centre has all the answers to your FAQ's Model specific questions and answers, maintenance advice, handy tips and instruction manuals. Browse through the following possible scenarios and click the most appropriate link for your current issue. Always disconnect your appliance from the mains before you start examining it!
How does a Hoover washing machine touch work?
0:492:19Hoover One Touch - YouTubeYouTubeStart of suggested clipEnd of suggested clipSimply download to your smartphone. And give every item of the laundry the carrot deserves. AndMoreSimply download to your smartphone. And give every item of the laundry the carrot deserves. And what's more with a tap on the plus icon on the bottom right corner of the screen.
Why is my Hoover washing machine not starting?
Check that you have closed the door properly. Open the door and check that nothing has became trapped in the door opening. Shut the door firmly and try again. There is a slight delay before the machine starts the cycle, during which time the safety lock activates.
How do you unlock a Hoover One Touch washing machine?
If your AXI washing machine is unplugged or the power supply switched off mid - cycle or before switching off on the control panel the door will remain locked. Simply plug the product back in or restore the power and then switch off the appliance using the button on the control panel. The door will now unlock.
How do I get my Hoover washing machine out of demo mode?
To remove from demo mode press and hold the buttons "Memo" and "Anti crease" for 7 seconds. If the buttons on the machine are unresponsive or the cycle will not start demo mode may have been activated. To remove from demo mode press and hold the buttons "Memo" and "Anti crease" for 7 seconds.
When I press start on washing machine nothing happens?
Make sure the machine is tightly plugged in. Next, check for a tripped circuit breaker. Reset the breaker and try to start the washer. If neither is at fault, you may have a damaged power cord.
Is there a reset button on a washing machine?
Most newer washing machines come with a reset feature that allows you to restart the washer after it experiences an error code or fault. Causes that lead to these problems include power spikes, imbalanced loads or an interruption in power. Some machines have a button you push to reset its motor.
How do you manually unlock a Hoover washing machine?
0:191:56How to open a stuck washing machine door - YouTubeYouTubeStart of suggested clipEnd of suggested clipIf the door is still stuck strike the area firmly where the catch is as this may help to release theMoreIf the door is still stuck strike the area firmly where the catch is as this may help to release the lock.
What is one touch setting on Hoover washer?
Understands in One Touch Hoover presents a most clever way to get the best for your laundry: One Touch, the connection system with NFC technology and an innovative APP. Keep the state of your appliance under control for maximum efficiency and best results every day.
What does the key symbol mean on a Hoover washing machine?
A key, for the child lock. An iron for the easy-ironing programme. A basin with a jet of water for the rinse cycle. Steam for the appropriate steam cycle. A basin with a downward arrow for the drain cycle.
How do I take my Hotpoint washing machine off demo mode?
Switch the machine on and then switch it off again. Press the Start/Pause button until the buzzer is heard. Switch the machine on again. The “DEMO” indicator flashes and then turns off.
How do I get my Hotpoint washing machine off demo mode?
How to turn off demo mode. Alternatively you may need to hold the buttons until all LEDs light up and then let go and press start/cancel and on/off.
How do you use the Hoover Wizard app?
0:096:26Hoover Wizard app - One Touch washing machine - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo we download the OneTouch wizard app our to set up the washing machines or washer. If you clickMoreSo we download the OneTouch wizard app our to set up the washing machines or washer. If you click the sink. And place it against the OneTouch.
How do you start a Hoover washing machine?
7:3123:12Hoover Dynamic Next Washing Machine Review & DemonstrationYouTubeStart of suggested clipEnd of suggested clipHours if you keep your finger on the delay start button it will rapidly cycle it to the program youMoreHours if you keep your finger on the delay start button it will rapidly cycle it to the program you want right up to 24 hours delay.
Why does my Hotpoint washing machine not turn on?
If the electrical outlet is receiving power, but the washer won't start, the power cord might be defective. However, this is very rare. To determine if the power cord is defective, use a multimeter to test it for the cord for power. If the power cord is not getting power, replace it.
Why does my Hoover washing machine keep stopping?
If your machine is stopping mid cycle, the problem may be that it is unable to drain out the water. Can you see water left inside the drum? If you can then the pump filter may be blocked or the waste arrangement (if you have connected the machine to the kitchen sink) may have a blockage .
How do you reset the delay start on a Hoover washing machine?
The pre-set delay increases by 1 hour each time the button is pressed, until h24 appears on the display, at which point pressing the button again will reset the delay start to zero. - Confirm by pressing the START/PAUSE button (the light on the display starts to flash).
Model No. HL 1482D3
Browse through the following possible scenarios and click the most appropriate link for your current issue.
Product code 31007223
Browse through the following possible scenarios and click the most appropriate link for your current issue.
Button not responsive, Demo Mode
Demo Mode. Are the keys on your dishwasher not functioning correctly. Your machine maybe in demo mode
Demo mode may be activated Tumble dryer
If the buttons on the machine are unresponsive or the cycle will not start demo mode may have been activated. To remove from demo mode press and hold the buttons "Memo" and "Anti crease" for 7 seconds.
Button not responsive, Demo Mode Dishwasher
Demo Mode. Are the keys on your dishwasher not functioning correctly. Your machine maybe in demo mode
Delay start may be activated
Should a 'H' with a number be shown the display, for example 'H02' then the delay start has been activated. The number indicates in how many hours in the future, the machine will start. So in our example the machine will switch on by itself in 2 hours time. You will not be able to use the machine instantly unless you cancel the delay start.
Demo mode may be activated Tumble dryer
If the buttons on the machine are unresponsive or the cycle will not start demo mode may have been activated. To remove from demo mode press and hold the buttons "Memo" and "Anti crease" for 7 seconds.
Empty the water tank
Check that the water tank found in the door is not full. Once it becomes full the dryer will stop working until the water is emptied away. Open the door and lift the tank off, taking acre as it may be heavy. Pour the water down your sink or drain.
Is the door shut firmly?
Check that you have closed the door properly. Open the door and check that nothing has became trapped in the door opening. Shut the door firmly and try again.
Is the machine installed in a cold place?
Your tumble dryer has been designed to be used in a habitable part of your home. During the winter, cold temperatures are detected by sensors inside the appliance which causes it to shut down. This may occur in colder parts of your home such as a garage or out building during a 'cold snap' when we experience temperatures bellow zero.
Is the water turned on?
If the water is not turned on the machine will not start the programme as it needs a supply of water at the start. Check that your water tap behind the machine or in a cupboard next to the machine is turned on. If it has just been installed or recently moved check that the water fill pipe has not been crushed or kinked.