Directions:
- Remove the cap from your empty Swiffer bottle. I know it can be hard to remove… try using adjustable pliers and the cap...
- Add equal parts of water and distilled vinegar until almost full.
- Squeeze just a couple of drops (DROPS!) of dish soap into the bottle.
- Replace cap.
- Shake to mix.
Full Answer
What Swiffer should I buy?
Swiffer Sweeper XL is 1.5X wider than our Swiffer Sweeper XL is 1.5X wider than our regular Swiffer Sweeper. It traps and locks even more dirt, dust and hair with each swipe vs. Swiffer Sweeper regular. Dry cloths have 3X Cleaning Action on Dirt, Dust & Hair. Textured wet mopping cloths dissolve dirt and grime and lock it away.
Where to buy Swiffer Products?
Swiffer Sweeper 2-in-1, Dry and Wet Multi Surface Floor Cleaner, Sweeping and Mopping Starter Kit. ... Get up-to-date information on weekly flyer features, Rollback & clearance items, exclusive products, and Walmart offers. You can unsubscribe at anytime. Subscribe 0 Thank you! You are now subscribed to the Walmart newsletter.
Can you wash walls with a Swiffer?
You will want to take a look at washing the walls with Swiffer Wet. To start washing the walls with Swiffer Wet, dust the walls using a light brush. Once dusted, take the Swiffer Wet and begin wiping the surface of the wall. It’s best to do this slowly and methodically for better results. Using Swiffer Wet to wash your walls is the way to go.
How to refill a Swiffer?
Recipe #3
- Mix equal parts hot water and vinegar in a bucket (a cup or two of each will work.)
- Dump in a splash of alcohol to keep anything gross from growing in the Swiffer refill container.
- Add a couple of drops of an essential oil. I like to use lemon or orange scents because they also work as degreasers.
How do you make Swiffer wipes?
InstructionsPour the distilled water and vinegar into the empty container or Ziploc bag. ... Next, place your clean rags in, one at a time into the container. ... Store with the lid on, or if using the ziploc bag, with the top zipped.To use, attach a rag to your Swiffer mop, just like you would the other wet pads.
How do I make my own Swiffer Wet Jet cleaner?
Directions:Remove the cap from your empty Swiffer bottle. I know it can be hard to remove… try using adjustable pliers and the cap pops right off.Add equal parts of water and distilled vinegar until almost full.Squeeze just a couple of drops (DROPS!) of dish soap into the bottle.Replace cap.Shake to mix.
What are the ingredients in this Swiffer wet wipes?
The nine ingredients in Swiffer Wet Jet solution are purified water, ethyl alcohol, Polypropylene Glycol N-Butyl Ether, Alkyl Polyglucoside, Didecyl Dimethyl Ammonium Chloride, Chlorhexidine Diacetate, Fragrance, Silicone Emulsion and Polyethyleneimine.
What can I use in place of Swiffer pads?
If you have a Swiffer Sweeper, there is absolutely no need to buy a WetJet or wet mopping pads! Instead, fill a spray bottle with floor cleaner solution (1 part water, 1 part vinegar, 2-3 drops of dish soap) and spray the area of floor that you want to mop.
Can I make my own Swiffer wet pads?
The easiest way to make your own reusable Swiffer pads is by simply using an old washcloth and pushing the fabric into the 4 Swiffer holes to secure. That's it. Avoid using microfiber washcloths or towels since these release microplastics into the waterways when washed.
Can I put Pine Sol in my Swiffer WetJet?
I added some Pine Sol to water in a measuring cup, loaded the syringe, and carefully squeezed it through the hole into the reservoir bottle that gets punched when you first load it into the Swiffer mop. The mix went in without a hitch, and I was able to fill the bottle at a cost of about 10 cents.
How do I make my own floor wipes?
1/4 cup water. 1/4 cup vinegar. 1/4 cup rubbing alcohol....Even folding the cloths in half may make them just right.Individually fold the cloths to fit the plastic container, and then stack, allowing the cloths to absorb the floor-washing solution.Seal the container so the wipes stay damp and are ready when needed.More items...•
Can I use vinegar in my Swiffer?
Include 3 cups of white distilled vinegar as your Swiffer disinfectant. Finish the homemade solution with 1/4 cup of liquid dish soap. Mix all of the ingredients together and transfer them to your old container. Place the bottle in the Swiffer and begin cleaning as you normally would.
How do you make reusable Swiffer WetJet Pads?
0:2813:02Easy Sew Reusable Swiffer Wet Jet Pads | Step-By-Step TutorialYouTubeStart of suggested clipEnd of suggested clipSo the nice thing about this cloth in particular is that it does stick to the bottom of the swifferMoreSo the nice thing about this cloth in particular is that it does stick to the bottom of the swiffer wetjet you know how they kind of have that like textured almost velcro like surface on the bottom.
What works better than a Swiffer?
The 7 Best Swiffer Sweeper and WetJet AlternativesBest Eco-Friendly Alternative: Turbo Microfiber Mop.Best Microfiber Alternative: Bona Microfiber Mop.Best Budget Alternative: Libman Freedom Spray Mop.Best for Pets Alternative: Shark VacMop Pro.Best for Hardwoods Alternative: Bona Hardwood Floor Premium Spray Mop.More items...•
What cleans better a mop or a Swiffer?
Ultimately, traditional mops are still the best option for deep cleaning. You can put more pressure on the head, and you can use any cleaning solution (rather than the Swiffer-only options) and as much of it as you need.
Before You Begin
While there are many disinfectants registered with the U.S. Environmental Protection Agency (EPA), not all are safe for consumers to use in DIY projects. The Centers for Disease Control and Prevention (CDC) recommends that consumers use a product that contains at least 70% alcohol to disinfect hands and surfaces.
Instructions
The container you select must be air-tight if you are making more wipes than you plan to use in the next hour or so. Alcohol evaporates very quickly and you'll be left with dry wipes.
How to Use a DIY Disinfecting Wipe
Now that you know how to make your own disinfecting wipes, be sure to use them correctly to disinfect surfaces.
How To Sew Reusable Mop Covers
Watch the diy swiffer pads video first and then follow the written step by step instructions below. Please enjoy and don’t forget to Like and SUBSCRIBE over on YouTube to be kept up to date with new videos as they come out.
Bonus: DIY solution for the wet pads
I like to keep my pads in top form with this little recipe. Mix 1 cup of water, 1 cup of vinegar, 4 drops of lemon essential oil, 1 tablespoon of dish soap, and soak the pads a bit in them.
Other Easy OPTIONS
Super easy 1 minute wet mop pad: Another alternative is to make a DIY reusable pad that’s almost identical to the disposable ones. Take your old disposable pad and place it on top of the towel. Then cut out the towel according to the dimensions of the disposable. You can use fleece, cotton, or an old towel. Zig-zag stitch all around the pad.
STEP 1: Prepare the pattern
Once you have downloaded the reusable swiffer pads pattern, print it out on a piece of paper. Then cut out any excess paper to prepare the pattern for use. You will get two pattern pieces, one smaller and one bigger piece
STEP 2: Cut the fabric
You need to cut 8 pieces of fabric – 2 out of the larger pattern (set 1) and 6 out of the smaller pattern (sets 2, 3 and 4) according to the instructions below.
STEP 3: Transfer the markings
Now you will have to transfer the dotted markings on all pieces of fabric. Transfer the markings from the smaller pattern onto the smaller stack. Then do the same and transfer them from the bigger pattern onto the bigger stack.
STEP 4: Start stitching
Pin both bigger pieces wrong sides together and stitch along the two outer lines. Backstitch at the beginning and the end of each seam. Leave the center stitching line unsewn.
STEP 5: Align swiffer dust wipes with each other
Take the piece you’ve just sewn on a flat surface. Take one piece of set 2 and place it on top of it, aligning the markings. Take a piece of set 3 and place it on top of the pile, and then take the smallest piece of set 4 and place it on top of everything. Pin everything in place.
STEP 6: Stitch the center
Next, you should make a vertical stitch along the center marking though all 8 layers. Now your reusable swiffer cloths have an opening for the handle.
STEP 7: Finish the reusable swiffer duster
Now you need to make slits on each layer of fabric. Grab your scissors and start clipping the fabric layers. Make the slits perpendicular to the seam, going as close as you can to the stitch. The space between these slits should be around half of an inch.