How to Make a Balloon Arch
- Sketch your design and gather your materials. Your illustration doesn’t need to be too intricate. ...
- Blow up the balloons. To give your arch variety, blow your balloons up at different sizes. ...
- Tie the fishing line to the end of your needle. We recommend a traditional knot. ...
- Thread your needle through the knot of an inflated balloon. ...
- Once threaded, slide each of the balloons all the way down the line one at a time. ...
- Cut the end of the fishing line. Be sure that you tie a knot at the end of the fishing line after cutting it so that your balloons ...
- Now, it’s time to put your arch up. Lay out the frame of the arch by adhering your hooks or nails to the wall or area where you ...
- Using your low temperature glue gun, create a fuller arch and fill in any holes with smaller balloons. ...
- Finish off your balloon arch with some optional foliage and fresh flowers. This will give your arch more texture as well as a natural feel. ...
Full Answer
How to make a simple balloon arch?
lots of balloons; clear double-sided tape; Attach the balloon tape (this isn’t sticky tape, but rather clear plastic tape with holes to push the balloon knots through) to where you want your balloon arch to be. A curtain rail, exposed beams, drainpipe or a purpose-built ready-made structure works best. Blow up your balloons to a variety of sizes. Attach them to the balloon tape.
What are the best balloons for ARCHS?
- Don’t try to bend the individual short rods. Assemble the rods to your desired length, and then bend the arch. ...
- The balloon clips slide over the rod, so all the balloons will have to be on the rod before you attach it to the stands or the table clamps.
- The balloon clips for arch strips can be attached before or after the strip is in place.
How to make a balloon arch without helium?
What materials do you need to make a balloon arch?
- Latex balloons in various sizes and colors.
- Balloon hand pump.
- Thin beading wire.
- Low-temp glue gun.
- Embellishments (paper tassels or faux greenery/florals work well)
- Command hooks or a pegboard with pegs.
How to make a balloon arch for Your Party?
Other Tips To Follow
- As you make each part, ask someone to hold it in place as you secure the string.
- Make sure each balloon is fully inflated and has no holes or dents.
- Practice putting at least one arch together before your event begins. ...
- To keep the balloons from falling, twist a small rubber band around each set of strings on the underside of the arch. ...
How do you make a balloon arch at home?
0:046:25EASIEST balloon arch tutorial without stand | PARTY DASH - YouTubeYouTubeStart of suggested clipEnd of suggested clipNow the wall hooks these are necessary to help you hang your balloon gun arch you would have oneMoreNow the wall hooks these are necessary to help you hang your balloon gun arch you would have one pile for your big balloons.
What can I use instead of a balloon arch?
The paper options don't stop there—you could use paper lanterns, fans, pinwheels and even paper umbrellas! Using paper accessories is an inexpensive, eco-friendly way to create the perfect arch. You won't get short of breath from blowing up balloons, and they're easy enough for you to do it yourself!28-Oct-2019
How do you make a balloon arch step by step?
0:096:09How to make a balloon arch - DIY Step by Step - YouTubeYouTubeStart of suggested clipEnd of suggested clipSimple to start off with the basic building blocks for most balloon decor. We usually start with doMoreSimple to start off with the basic building blocks for most balloon decor. We usually start with do plaits that is we take two balloons. And we tie them together.
What do I need to buy to make a balloon arch?
Making a Mounted ArchBalloons (different sizes and colors)Balloon pump.Chicken wire.Wire cutters.Nails, thumbtacks, or pushpins.Glue dots.Ribbon or flowers (optional)
What can I use instead of a balloon?
Eco-Friendly Alternatives to BalloonsBunting and Banners. You can either make paper or fabric bunting or banners, depending on how you want to use them and if you want to reuse them for another party. ... Paper chains or Garlands. ... Streamers. ... Paper flowers. ... Pompoms. ... Pinwheels. ... Bubbles. ... Kites.
What do you use in lieu of balloons?
7 Ocean-Friendly Alternatives to Balloons You Can TryFlags.Banners.Streamers.Kites.Pinwheels.Floating flowers.Bubbles.08-Jun-2018
Can I make a balloon arch the night before?
If you want to do your helium-filled arch the night before the event, I highly recommend you treat your balloons with hi-float. If you are planning to do an air-filled arch, then it's fine to create the arch the day before.
How do you make a balloon arch without strips?
2:028:12No Strip? How to Make a Balloon Garland Without a StripYouTubeStart of suggested clipEnd of suggested clipDo is twist the balloons together at the neck wrap one neck around the other. And pull it tight andMoreDo is twist the balloons together at the neck wrap one neck around the other. And pull it tight and tie it. And that's your first pair.
How do you make a balloon arch without a kit?
1:144:33How to make a Balloon Garland without any KIT - YouTubeYouTubeStart of suggested clipEnd of suggested clipPairs now take a long string and start tying the balloons with the first pair take the string and goMorePairs now take a long string and start tying the balloons with the first pair take the string and go around the lower balloon twice then make a loop and put this loop over the top balloon to tie. It.
How long does it take to make a balloon arch?
approx 30 - 45 minsHow long will it take to assemble the balloon arch? It will take approx approx 30 - 45 mins to make the garland if using a balloon pump, as it will definitely make the inflation quicker and easier. The majority of the time will be spent inflating the balloons and the rest adding them to the garland time.
How do you make a balloon arch without wire?
2:154:17DIY Balloon Arch (Super Easy Hack!) - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd I'm all for just using the resources that you have so I just cut a small slit with my scissors.MoreAnd I'm all for just using the resources that you have so I just cut a small slit with my scissors. And all you do is put the balloon into the hole that you made and it holds it in place in the tape.
How do you make a balloon arch without helium?
0:0417:33How to Make a Balloon Arch WITHOUT Helium or FrameYouTubeStart of suggested clipEnd of suggested clipBelow. So you can use an air compressor. Or if you don't have one handy you can always use a handMoreBelow. So you can use an air compressor. Or if you don't have one handy you can always use a hand pump but the air compressor is going to make things go so much faster.
Diy Balloon Arch Materials
1. Balloons – Have fun picking out different colors and consider adding patterned balloons to your design! 2. Balloon Pump – While this isn’t neces...
How to Make A Balloon Arch
Project Time: 1 – 2 hoursStep 1: Sketch your design and gather your materials. Your illustration doesn’t need to be too intricate. Having an idea o...
How to Make A Balloon Arch Step-By-Step
You can find our complete step-by-step guide for how to make a balloon arch below, print it out, share it with friends or save it for a later proje...
1. Plan your DIY Balloon Arch Design
Now there are a few different ways you can create a balloon arch. First off, decide is what shape you want your arch to be. Depending on the location of the arch, you will want to work out what shapes fits best in your space.
4. Start to assemble!
Now take your blunt sewing needle and fishing line with a knot on the end.
5. Finish it off!
When you have put two thirds of your balloons on the line, cut and tie off the fishing line.
6. Hang your hooks!
Next, hang hooks on the walls or structure where you want the arch to go. I personally love the 3M hooks so that they are easily removed without damaging your walls.
7. Fill in the blanks!
Now, this is the fun bit where you get to add all of the finishing touches and your design comes together beautifully!
Ready Made Balloon Kits
If DIY is not for you and you are nervous about your skills there are some great DIY kits out there.
Balloon Arch Structures
If you are looking for your arch to be a little sturdier and free stand or hold its form without being against a ball, you will want to utilize chicken wire in the center of the structure. Alternatively, you can buy a structure like the ones below to support your balloons.
Community Q&A
Approximately how many balloons would I need to make an arch over a 12 table?
Tips
If you want to use just one color, consider using different shades of it, such as light pink and dark pink.
Warnings
Helium balloons will begin to lose their buoyancy after 8 to 15 hours, so plan to erect your helium rope arch no more than a few hours before your event begins.
About This Article
This article was co-authored by Lois Wade, a trusted member of wikiHow's volunteer community. Lois Wade has 45 years of experience in crafts including sewing, crochet, needlepoint, cross-stitch, drawing, and paper crafts. She has been contributing to craft articles on wikiHow since 2007. This article has been viewed 818,970 times.
Easy DIY Balloon Arch Tutorial
By far, the most time-consuming part of making a balloon arch is blowing up 80+ balloons and tying them together. You can make a small balloon arch by yourself in 2-3 hours. If you have help blowing up balloons and tying them together, you could make it much faster.
Step 4. Secure the balloon quads to the wire to form an arch
Starting with the larger white balloon quad, TWIST one balloon from each quad onto the wire, then SLIDE into place.
Step 6 (Optional): For extra sparkle or light, add a string of lights to your rainbow balloon arch
This was a last-minute impulse for me, but I love how it turned out! This would be especially fun for an evening event.
Balloon Arch Kit
Good luck with your DIY Balloon Arch! Find inspiration for more DIY Projects and Crafts here.
Rainbow Party Treats and Party Favors
Since this particular arch was a rainbow, read on for more rainbow party ideas (party favors and treats). W hatever the occasion for your rainbow balloon arch, scroll on for ideas for your rainbow party treats and party favors.
How to Make a Balloon Arch
Balloon arches are such a fun addition to any celebration! They elevate the decor, emphasize the color scheme, and are a perfect way to put a custom spin on a party theme. A balloon arch is also a great backdrop for photos, dessert tables, and more. But they don't have to be difficult to put together or cost an arm and a leg.
Gather Materials
As you're planning your balloon arch, first decide the color palette that you'd like. A palette of three to four colors tends to work well with one main color. We went with a bright white base color and some fun pops of coral and metallic gold to emphasize our palette. You'll also want to grab a few different sizes of balloons.
Inflate Balloons
Start by inflating your balloons. Think ahead about how many of each size you'd like, and about the ratio of colors that you'll include.
String on Wire
To start creating your arch, you'll first make a garland of balloons. Cut a piece of beading wire as long as you'd like your arch, plus 18 inches on either end. Start stringing your balloons onto the wire by inserting the wire through the tied-off ends of the balloons.
Create a Garland
Continue stringing on your balloons until a garland starts to form. Add balloons until you've reached your desired length. Make sure that you have about 18 inches of unused wire on either end of your balloon garland.
Hang Hooks
Hang your hooks. You can either place Command strips on a wall, or use a peg board like we did here. You'll need one hook in the center, and then two on either side—about 12 inches lower than the center hook. The two side hooks should be placed as wide as the garland that you created.
Attach to Hooks
Attach your garland to the hooks. Hook the middle of the garland over the center hook, and wrap the excess wire on either end around the side hooks.
Balloon arch kit: everything you need to make a balloon arch
monochrome and multicolored balloons (depending on your idea). You’ll need about 20 large, 30 medium, 40 small balloons per meter;
DIY balloon arch instructions
Before telling you how to make a balloon arch step by step, we have to note that you should use only high-quality latex balloons, as cheap models won’t withstand twisting and burst at the most inappropriate moment. Quality balloons guarantee that your arch will look great both before, during, and after the party!
How to make a simple balloon arch
Before you start inflating the balloons, decide how many balloons of what size you want your arch to consist of, and what colors and how many of them you will use.
How to add freshness and originality to your arch
Are you happy with the result and think your balloon arch looks great?
Awesome ideas and themes for making a balloon arch
The decor should always fit the style concept of the event: this is the only way it will look natural.
Man-made miracles
Making a balloon arch is exciting and fun. As soon as you understand the nuances of the process, you will be able to create masterpieces that will make any holiday beautiful and unique.