What are fuel line disconnect tools?
Fuel line disconnect tools make removing the fuel line safer. Be sure to wear safety goggles to protect your eyes from the damaging buildup, grease, grime and dirt that is beneath your vehicle. Getting those things in your eyes not only makes it hard to see to work on your car, but they can cause further damage.
What size scissor tool do I need to disconnect fuel lines?
Many modern vehicles use 5/16-inch or 3/8-inch fuel lines, and the ABN Fuel Line Disconnect Scissor Tool has you covered in either ca… . The great thing about the Thorstone 22pcs Master Quick Disconnect Tool Kit is that you can disconnect more than just fuel lines.
How do I clean the fuel line on my car?
Clean up after working on your car with pumice hand cleaners, automotive degreaser, microfiber cloths and shop towels. Ask an associate if you're not sure which fuel line disconnect tool your vehicle needs.
What size fuel line do I need for my car?
Many modern vehicles use 5/16-inch or 3/8-inch fuel lines, and the ABN Fuel Line Disconnect Scissor Tool has you covered in either case. Many modern vehicles use 5/16-inch or 3/8-inch fuel lines, and the ABN Fuel Line Disconnect Scissor Tool has you covered in either ca…
How do you disconnect a high pressure fuel line?
1:382:43DIY: Removing a Push Lock Fuel Line Fitting - YouTubeYouTubeStart of suggested clipEnd of suggested clipYou just pull back into the fuel line here and just with one. Hand. You can see it just pops offMoreYou just pull back into the fuel line here and just with one. Hand. You can see it just pops off there now it just may be a little harder to work because you do have an o-ring inside there.
How do you remove a push lock fuel line without a tool?
4:198:00How To Remove Ford Fuel Line Fittings Without Fancy Tools! Quick ...YouTubeStart of suggested clipEnd of suggested clipSo I'll push the fuel line this way push the clip that way. And it should come off. Make sure youMoreSo I'll push the fuel line this way push the clip that way. And it should come off. Make sure you release the fuel. Pressure before attempting.
How do you install a high pressure fuel line?
2:385:28Mazdaspeed 3 - Corksport High Pressure Fuel Line Install - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd reinstall it and then put the 10 mils back on and then go from there gently put it in you don'tMoreAnd reinstall it and then put the 10 mils back on and then go from there gently put it in you don't want to pinch. Or rip the o-ring seal.
Can you use rubber hose for high pressure fuel line?
Standard rubber vacuum or heater hose should never be used in fuel applications. The hose will deteriorate from the inside out and can plug fuel filters and carburetors with rubber debris, long before it springs an external leak.
How do you flare a fuel line without a tool?
0:584:11Fuel Line Flares for CHEAP (Hydraulic fuel line tool NOT needed)!YouTubeStart of suggested clipEnd of suggested clipSo we have it in the 3/8 hole. And then you basically clamp these down you put this in a vise orMoreSo we have it in the 3/8 hole. And then you basically clamp these down you put this in a vise or something along those lines because gonna need to use a decent amount of pressure normally.
How do you use quick disconnect tool for fuel lines?
5:599:03Fuel Line Quick Disconnect Tool & Safety: HOW TO ESCAPE - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd push the tool. In push the hose up against the tool. And then pull the hose. Off. And wait aMoreAnd push the tool. In push the hose up against the tool. And then pull the hose. Off. And wait a second for any fuel to drip. Out take this tool off remove everything here. And take my fuel line. Out.
Can you reuse high pressure fuel lines?
NOTE: The high pressure fuel injector line seal is a single-use item and cannot be reused.
How do you plumb an EFI fuel system?
0:354:22How to Setup a Fuel System for EFI Fuel Injection - YouTubeYouTubeStart of suggested clipEnd of suggested clipIt travels forward from the pump up to the engine bay goes through the fuel rails. And pressure isMoreIt travels forward from the pump up to the engine bay goes through the fuel rails. And pressure is controlled by a regulator that bleeds off a little bit of the fuel. And sends it back to the tank.
How much pressure should be in a fuel rail?
The components serve distinct functions: the pump pressurizes the fuel from about 3-4 bar (40-60 psi) to between 100-300 bar (1500-4500 psi). The fuel injectors spray the fuel directly into the cylinders.