high pressure fuel line connectors

by Florine Heller Published 4 years ago Updated 3 years ago

7.89 High Pressure Automotive Fuel Line Quick Connector

Parts	Material	Supplier	Supplier	Application
Body	PA12 GF30	ARKEMA	EVONIK	Fuel
	PA66 GF30/35	BASF	DUPONT	Fuel Steam
	PA6/6T GF25	BASF		HT Fuel
	PA9T GF30	KURARAY		HT Fuel

6 more rows ...

May 4 2022

Full Answer

How do you put fitting on steel braided fuel lines?

Tools Required

Bench mounted vice
Imperial spanners that have a polished face (avoid marking the anodised finish)
3 in 1 or similar
A Fine tooth saw such as junior hacksaw
Masking tape
Pliers and snips
Hobby knife
Personal Protective Equipment (gloves and glasses)
Cloth to wipe off excess oil
Vice Jaws. ...

How to measure fuel line fittings?

Tapered Thread

Thread Types: Straight Thread - With straight thread the threads run parallel. ...
AN Standards. High-end racing and performance fuel delivery systems most frequently implement fuel lines and fittings manufactured to AN Standards.
Common Types of Fittings. ...

Can you repair a broken high pressure fuel line?

Use a wrench to unscrew the holding nuts, thereby removing the low-pressure fuel line to gain access to the high-pressure fuel line. Slowly turn the fitting for the high-pressure fuel line to relieve the fuel pressure from the fuel line. This prevents fuel from spraying.

Where can I get This high pressure fuel line?

Get the job done with the right part, at the right price. Find our best fitting fuel line kits for your vehicle and enjoy free next day delivery or same day pickup at a store near you!

Can you use rubber hose for high pressure fuel line?

Standard rubber vacuum or heater hose should never be used in fuel applications. The hose will deteriorate from the inside out and can plug fuel filters and carburetors with rubber debris, long before it springs an external leak.

How do you fix a high pressure fuel line?

1:553:26Replacing Leaking High Pressure Fuel Line - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo make sure you choose the right type of hose just cutting in here to length. Now fitting some newMoreSo make sure you choose the right type of hose just cutting in here to length. Now fitting some new clamps onto the hose slipping. It back on to the fittings. And begin to tighten it up.

What are the types of fuel line connections?

Top CategoriesHose End Fittings.Hose & Hard Line.AN Unions, Couplers & Reducer Fittings.AN to NPT Adapter Fittings.Fuel Pump & Pressure Regulator Fittings.Tee & Y-Fittings.Hose Barb Fittings & Adapters.Cap & Plug Fittings.More items...

How does a fuel line quick connect work?

2:1812:37How to Disconnect Common Quick Connect Fittings - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo that's how this is a quick-connect. So when you push the line at that side at an angle. It willMoreSo that's how this is a quick-connect. So when you push the line at that side at an angle. It will push that yellow piece out of the way and as soon as the line gets past it it'll back into place.

Will flex seal work on a fuel line?

No, Flex Seal is not resistant against a corrosive flammable like gas or oil. It is strongly recommended that you do not attempt to use Flex Seal Liquid™ on a gas tank.

Can JB Weld be used on a fuel line?

When fully cured, J-B Weld is completely resistant to water, gasoline, and about every other petroleum product or automotive chemical.

Are fuel lines NPT?

NPT is a tapered thread common to plumbing connections in North America, and is also the most common thread type in fuel line components.

What is the best type of fuel line?

The best solution is a material called PTFE. That stands for polytetrafluoroethylene—a plastic material that is best known as Teflon in one specific variation. This material is impervious to the degenerative effects of fuel that also creates a vapor barrier so fuel vapors cannot leak past.

Is braided fuel line better?

Braided hose provides better heat dissipation and better flow, which is important when choosing performance car parts. Additionally, braided lines are able to withstand more pressure than rubber lines. When you need a flexible hose, you may not be able to use metal.

The Benefits of Buying Hard Fuel Line Fittings & Connectors

There are many benefits to buying hard line fittings & connectors. When properly matched, the result will be a leak free connection and plumbing for your vehicle. It is important to understand hard fuel line fittings & connectors and their functions to make this possible.

Customer Questions About Hard Fuel Line Fittings & Connectors

Buying quality automotive hard fuel line connectors and fittings can be overwhelming and confusing. There are many different factors to consider when shopping for hard fuel line fittings & connectors including different brands, prices, warranties, performance capabilities, and much more.

Can't Find The Hard Fuel Line Fittings & Connectors You Are Looking For?

A JEGS expert is ready to answer your questions and help you find the hard fuel line fittings & connectors that you require for your specific application.

What is fuel line?

Fuel line is a petroleum-resistant nitrile tube with a covering that resists weathering, ozone and heat and can be used for ethanol-laced fuels and diesel fuel. It should, however, not be used on coolant systems, oil systems or fuel-injection systems that produce pressures higher than 50 psi.

What is the hose from fuel cell to filter?

The main line from fuel pumps to regulators (under hood) is a single neoprene 1/2 id hose. I do not see any deterioration, other than some contaminants in filter and carburetor float bowls.

What type of hose is used for a small engine?

Marine hose is rated for 40 psi and will work in a pinch for carbureted passenger cars and light trucks. Tygon fuel hose. Small engines on your lawnmower, ATV or motorcycle use a gas-resistant vinyl tubing called Tygon.

What causes water contamination in fuel cells?

What causes water contamination in a fuel cell is the condensation that does and can form in the empty portion of the tank itself and it occurs no matter what fuel you use. With gasoline, the water instantly separates and creates a layer of water, with ethanol blends, it will absorb up to a certain amount.

Is methanol hose ozone resistant?

It is approved for all fuel blends including straight methanol, and the outer coating is also ozone- and abrasion-resistant. High-pressure fuel-injection hose can also be used in low-pressure applications, but the difference in pricing may convince you to save it for where it is needed. Nylon fuel line.

Can additives be used to prevent deterioration of fuel line?

Therefore, even the most liberal use of additives will not prevent the deterioration of fuel line not formulated to withstand it. Caution and vigilance is required, including keeping abreast of the ever-changing state of modern pump gas and it's compatibility with whatever fuel line you employ. Reply.

Can you clamp a worm gear with a neoprene hose?

Neoprene with an outer steel braiding is also offered for custom applications; however, it is difficult to clamp with a standard worm gear clamp. Special AN-type fittings are often necessary with steel-braided fuel line. When a bent filler neck hose is necessary, wire-inserted fuel hose is also offered.

Ford

Blue Oval fittings operate on a very similar basis to the GM and Chrysler QD fittings and often the same tools can be used to separate the female end from the male connector.

Chrysler

The simple version is that the Chrysler fittings appear to be very similar to the GM versions so that converting a Mopar late model hemi over to AN fuel lines is incredibly simple and for once doesn’t cost any more than the same parts for a GM or a Ford! That alone is cause for celebration.