Does GE make a tandem breaker?
GE makes THQP 1/2 size breakers instead of the full size tandem single poles that other manufacturers commonly use. The panel busstabs will have a small tab on both sides of the bus stab at 90 degrees to it for the breakers to clip to.
Are GE and Eaton Breakers interchangeable?
Eaton's UL classified breakers are designed and tested to be both mechanically and electrically interchangeable with circuit breakers manufactured by General Electric, Thomas & Betts, ITE/Siemens, Murray, Crouse-Hinds, and Square D.
How to identify circuit breaker types?
Types Of SF6 Circuit Breakers
- A single interrupter circuit breaker is used for up to 220V
- Two interrupters circuit breakers are used for up to 400V
- Four interrupter circuit breakers are used for up to 715V
What breakers are compatible with Eaton BR?
Similarly, it is asked, are Eaton and Square D breakers compatible? While you now know that Eaton breakers, Westinghouse breakers, Square D breakers, and Cutler-Hammer breakers are largely compatible, you still need to find the exact models you need for your facility.
What breakers are compatible with GE THQL?
What Circuit Breakers Are Compatible With GE Breaker Boxes?GE Fits GE. The safest route is to use GE circuit breakers with GE breaker boxes. ... Siemens fits GE. Siemens breakers can be used in GE breaker boxes, and they are generally known to be compatible. ... Third Party Breakers.
Are all GE breakers compatible?
You cannot approach it from the GE panel side, their answer will always be the same: GE. From the standpoint of any panel manufacturer, they NEVER list their panels to be used with anything other than their own breakers.
Who makes THQL breakers?
Q Line Circuit Breakers Are One-Inch Wide Per Pole, Compact, Thermal-Magnetic Devices Designed For Residential And Commercial Applications.
Will Eaton breaker fit GE panel?
Yes, the Eaton breaker would fit in the space. And the breaker may even have indents to allow it to fit into the slim spaces of a GE panel.
Which breakers are interchangeable?
Specified breakers are breakers that have been tested and listed for a panel by the manufacturer. Interchangeable breakers are breakers that have been tested in the panels that they are approved for and are similar to specified breakers, typically by a third party such as Underwriter's Laboratory (UL).
Can I use a Square D breaker in a Eaton panel?
Designed to fit virtually any panel Eaton's UL classified breakers are designed and tested to be both mechanically and electrically interchangeable with circuit breakers manufactured by General Electric, Thomas & Betts, ITE/Siemens, Murray, Crouse-Hinds, and Square D. Video Player is loading.
What is a Q line breaker?
Q line circuit breakers are one-inch wide per pole, compact, thermal-magnetic devices designed for residential and commercial applications. The QC breakers are lug-lug versions of the Q Line and are available for 35mm DIN rail mounting.
What is AQ line GE breaker?
OVERVIEW. The GE Q-Line 20 Amp 1/2 in. Single-Pole Circuit Breaker has a tin-plated copper stab that creates permanent and corrosion-resistant connection. The calibration screw is cemented to prevent shifting and provides a stable connection. The attached screw stabilizes the calibration for optimum performance.
Does GE make a tandem breaker?
Ge does not use tandem breaker but rather slim breakers. Basically they are half the thickness of a full size breaker and you can put two in the place of a single full size breaker. Some call them wafer breakers.
Can you mix circuit breaker brands?
Never place a different brand circuit breaker in a circuit breaker panel of a different brand. Contrary to the belief that they are all the same and will work in any circuit breaker panel, the fact is just the opposite. Circuit breakers may actually fit, but not properly.
What is the difference between Eaton Br and Cl breakers?
The Eaton CL line includes some neat breakers that don't really exist natively, such as their remote control breakers, and AFCI or GFCI for the obsolete panels they fit. The Eaton BR line is actually UL-listed as dual Type BR and C, meaning it is natively listed (not classified) for Challenger panels.
Can you use GE breakers in a Cutler-Hammer panel?
Re: Cutler Hammer CH vs BR The breakers are physically interchangeable with Homeline, GE, Siemens, Westinghouse, and Murray (a Siemens division), and possibly others.
What is the part number for a 20A fuse?
Just to let anybody in this decade know, the part number at Home Depot is 786676362108 for a single one pole 20A fuse.
Can you use a half inch breaker on a single pole?
The bottom one is only used with if you have few half inch breakers installed with side hooks but much older load centre may not able to use the half inch breaker so if you did got half inch exchange that one to full one inch single pole or full size two inch double pole breaker.
Special offers and product promotions
Create your FREE Amazon Business account to save up to 10% with Business-only prices and free shipping. Register today
Have a question?
There was a problem completing your request. Please try your search again later.
Important information
There was a problem filtering reviews right now. Please try again later.
Where is the breaker supported on a panel?
I would start there as cheap insurance, make sure the breaker fits snugly, making solid contact with the buss in the center of the panel and is supported at the outer edge opposite the buss.
What is the outer end of a breaker?
The outer end of the breaker is retained by a hook and the inner end seats on a stub that stands up from the buss--seems to pretty much match the original breaker that way. Although, when fully seated it appears as just slightly out of alignment in comparison to the rest of the breakers installed in the panel.
Does changing the panel become a consideration?
If you are considering significant changes, changing the panel does become a consideration.
What does specified breakers mean?
Specified breakers mean the manufacturer has tested the breakers in the panel and listed them to be used in that panel. You have probably noticed “UL Classified” and interchangeable circuit breakers around the market.
Is using breakers not listed or labeled a violation of the electrical code?
They site the National Electrical Code (NEC) Section 110-3 (b), which states that using breakers not listed or labeled is a code violation. Their argument is for public safety drawing evidence from past accidents due to the use of Classified breakers in their panel.
Can you use UL classified breakers in panelboard?
Otherwise, just replace the same type of existing breakers in the box. Manufacturers would want to specify their own breakers for use in their panelboards for obvious financial reasons. However, remember you have options with UL Classified breakers like the chart above. Some electricians use Classified breakers for obvious reasons, whether for price, availability, or convenience. But which ever circuit breakers you go with, make sure to install them safely.
Can UL Classified breakers be used for panels?
These breakers meet UL and NEC code regulations. UL has stated that people must adhere to all manufacturer supplied instructions. Moreover, UL also stated that Classified breakers can be used for their approved panels. ( Source: UL Marking and Application Guide Panelboards ). On the note of warranty void, manufacturers cannot void their warranty if the replacement part has proven to be safe by a third-party, for instance UL (Magnusson-Moss Warranty Act).