GE Refrigerator Will Not Make Ice – Solutions
- Set the Temperature Right. Locate the temperature dial on your refrigerator and set each section’s temperature to the right degree.
- Stock Up the Unit Properly. Load the refrigerator up to ¾ full. ...
- Ensure the Condenser Fan Is Working. Unplug the refrigerator from the power source and move it away from the wall. ...
- Clean the Condenser Coils. ...
Full Answer
How to fix GE refrigerator ice maker not working?
Some Common Problems
- Reset your ice maker
- Check the filter
- The control arm is in off position
- The door switch is bad
- Water inlet valve
- Water Pressure
- Blockage in the line
- The ice is stuck in the mold. Most of these problems will require a little bit of testing, so make sure you have a multimeter tool, to check parts for ...
How to fix a noisy GE refrigerator?
Steps to Quieting a Noisy fridge
- Clean the Moving Parts. The easiest thing you can do to avoid unnecessary noises is to regularly clean your fridge. ...
- Call the Professionals. If you don’t manage to figure out exactly what’s wrong with your fridge while you’re cleaning it, the next obvious step would be to call in ...
- Separate the Fridge from the Floor. ...
Why is my ge ice maker not making ice?
Why is my GE icemaker not making ice? If the water inlet valve is defective, or if it has insufficient pressure, it won't allow water to flow through. As a result, the ice maker won't make ice.
Why is my Refrigerator not making ice?
Why Is My Ice Maker Not Working on My Frigidaire Refrigerator?
- Freezer Temperature Is too High. Setting the temperature in the freezer section, where the ice maker is, higher than 10 degrees Fahrenheit or -12 degrees Celsius affects the ice ...
- Water Filter Is Old. An old water filter tends to be clogged. ...
- Ice Maker Switch Is Off. ...
- Door Seal is Weak. ...
- Water Inlet Valve Is Faulty. ...
- Door Switch Is Defective. ...
How do I reset my GE ice maker?
Tips for Resetting a GE Ice MakerAdjust the feeler arm. If water doesn't immediately start filling in the reservoir, go to step 2.Press the on/off button.Keep the ice maker unplugged for 15 minutes.Turn the ice maker back on.
Why is my GE refrigerator not producing ice?
The icemaker must reach a temperature of 16 degrees F before a cycle will begin. If the temperature in the freezer is too warm, ice cubes will take longer to form or may not form at all. Try adjusting the freezer temperature a little lower. A low food load in the freezer can affect the production of ice.
Why did my GE ice maker stop working?
Check the Water Filter Another simple and often overlooked solution is that the water filter needs to be replaced. Some GE refrigerators have a sensor or timer that will stop the ice maker from working if the water filter needs to be changed. This is a safety feature to ensure the ice and water are safe to consume.
How do I get my GE ice maker to work?
0:242:11How to Troubleshoot Icemaker Issues - YouTubeYouTubeStart of suggested clipEnd of suggested clipCheck that the icemaker switch is in the on position. The green light should appear under the switchMoreCheck that the icemaker switch is in the on position. The green light should appear under the switch. When the icemaker is on next make sure that the icemaker.
How do I get my GE refrigerator to make ice?
0:091:37French Door Refrigerator Icemaker Operation - YouTubeYouTubeStart of suggested clipEnd of suggested clipIf you want to turn the icemaker off tap the icemaker or ice button depending on which modelMoreIf you want to turn the icemaker off tap the icemaker or ice button depending on which model refrigerator you have you may have to hold that button for 3 seconds to activate.
How do you troubleshoot an ice maker?
0:505:02Ice Maker Not Working? - Check these 6 Things first! - YouTubeYouTubeStart of suggested clipEnd of suggested clipUsually on all ice makers there's an on off switch you want to find out where that's at on thisMoreUsually on all ice makers there's an on off switch you want to find out where that's at on this particular. Model it's an easy on off switch right here if it's not on the on.
Why isn't my ice maker not making ice?
If your ice maker isn't producing ice at all or is producing crescents or cubes that are smaller than usual, it's typically indicative of a clog somewhere along the supply line. Cause: A common cause for a clog is frozen water in the line. Fix: To repair a frozen line, slide the refrigerator and unplug it.
Can water filter cause ice maker not to work?
While a clogged water filter could be the cause of your ice maker not working, there are more common causes. First, make sure that your icemaker is simply turned on and plugged in. Check the power cord and make sure it is plugged in. Take a look at the feeler arm or paddle to confirm it can move freely.
How do I reset my GE bottom freezer ice maker?
This arm, also called a feeler, is what tells the unit to stop producing ice when it comes into contact with ice cubes. Restore power to the ice maker. Next, push up on the arm or feeler three times. This will reset the unit.
Why isn't my ice maker not making ice?
If your ice maker isn't producing ice at all or is producing crescents or cubes that are smaller than usual, it's typically indicative of a clog somewhere along the supply line. Cause: A common cause for a clog is frozen water in the line. Fix: To repair a frozen line, slide the refrigerator and unplug it.
Can filter stop ice maker from working?
While a clogged water filter could be the cause of your ice maker not working, there are more common causes. First, make sure that your icemaker is simply turned on and plugged in. Check the power cord and make sure it is plugged in. Take a look at the feeler arm or paddle to confirm it can move freely.
Where is the icemaker switch located?
This type of icemaker is primarily found in Bottom-Freezer and French-Door style refrigerators, though it can be found in other styles as well. To turn ON the icemaker, slide the switch to the left so that the paddle is extended out past the icemaker.
How to fix a GE refrigerator that won't make ice?
The following are ways to solve the problem of a GE refrigerator not making ice: 1. Set the Temperature Right. Locate the temperature dial on your refrigerator and set each section’s temperature to the right degree. The ideal temperature for the fresh food compartment is 37 degrees Fahrenheit, while that of the freezer is 0 degrees Fahrenheit.
How to keep ice in a refrigerator?
2. Stock Up the Unit Properly. Load the refrigerator up to ¾ full. If the appliance is not properly loaded, it may affect ice production. However, if the refrigerator is full, it will maintain a stable temperature and boost ice production. 3. Ensure the Condenser Fan Is Working.
What happens if a condenser fan is too stiff?
If they are stiff or don’t move freely, the fan motor is most likely defective and should be replaced. The condenser fan cools the refrigerant system. So, if it malfunctions, the refrigerant system will heat up, and as a result, affect ice production. 4.
Why won't my ice maker make ice?
Another possible reason why your ice maker will not make ice is the unstable temperature within the refrigerator. So, ensure your refrigerator’s temperature is always set right. The right temperature for the refrigerating unit is 37 degrees Fahrenheit and 0 degrees Fahrenheit for the freezer.
Where is the condenser coil located?
Depending on the model of your refrigerator, the coils may be found on the back or top of the refrigerator. Then, on some other models, it is located under the appliance behind the base grille.
Can you turn off the ice maker on a refrigerator?
You may have unintentionally turned it off while loading the refrigerator. This is true if the ice maker switch is not on the control panel. Additionally, a defective icemaker switch will affect ice production. If this is the case, you may have to replace the ice maker assembly.
Does a refrigerator make ice?
So, if the refrigerator’s temperature is warmer than usual, it will take a longer time for ice production. Or, the refrigerator will not make ice at all. It is important to note that the temperature dial is located in different places. This depends on the model of the refrigerator.
1. Ice Maker Is OFF
If your GE refrigerator ice maker stopped working, the first step is to make sure the ice maker is turned on. The on/off switch should be a wire arm attached to the ice maker. If it is down, then the ice maker is on. If it is pushed up, then the ice maker is off.
2. Improper GE Freezer Temperature
If a GE ice maker isn’t making ice, it may be too warm. GE recommends that the freezer should be set to 0 to 5 degrees Fahrenheit for ice production. If it’s too hot, ice may not produce well or appear smaller or misshapen. On the other hand, if it’s too cold, ice may build up and frost will prevent ejection.
3. Ice Maker is Jammed
If your GE refrigerator ice maker is not working, it could be because of a particularly common issue. When a piece of ice doesn’t fall into the ice bin, a jam forms around the metal fingers of the ejector’s arm. The water from the melting ice freezes on the fingers, forming an ice bridge that blocks new cubes from being caught.
4. Faulty Water Filter
You should check to be sure that the water filter that you just replaced was installed and connected properly. If the refrigerator water filter was installed wrong, ice cubes will not form in the ice maker and can lead to other problems in the fridge.
5. Water Supply Line Issue
When your water line is not connected to your refrigerator, the water will not flow to the dispenser and you will not get any water or ice. The water shutoff valve on the refrigerator is closed- this prevents the water from coming into the door of the refrigerator.
6. Icemaker Mold Thermostat
The icemaker module has a temperature sensor that automatically dispenses ice when the temperature reaches about 15 degrees Fahrenheit. There are all sorts of complicated components that make up the ice maker module. One of them is the ice ejector. It turns the drum to release ice when it’s time for a refill.
7. Defective Door Switch
The water and ice dispenser in your fridge will turn off automatically when the door is open. To check if it’s working, just use a multimeter to measure the continuity on the door switch. If it doesn’t have continuity, then you’ll need to replace the switch.
Check the drain valve
This is the first step and the most important thing to check. You need to open the ice maker drawer and check if there is any water inside it. If it is empty then you can easily check the drain valve. You need to remove the cover and then turn the valve by hand. If there is water in the container then you can easily fix the issue.
Check the ice maker
It is also an important step and it will help you to find out the exact problem. You need to open the freezer drawer and check if the ice maker is working properly. If it isn’t then you need to change the motor.
Check the power supply
You need to check the power supply as it can also be a problem for your refrigerator. You need to open the main panel and check if the power supply is damaged or not.
Check the cooling system
It is one of the most important parts of your refrigerator. If there is a problem in the cooling system then it may start leaking water. You need to take the cover off and check if there is any water leakage. If it is leaking then you need to call a professional.
Change the water line
If you have any leak in the water line then you can easily fix this by replacing the water line. You need to remove the cover of the water line and clean it with some soap and water. After that, you need to replace the cover and switch on the faucet.
Fix the problem
Now, when you know the exact reason for the problem then you can easily fix the issue. You need to turn off the refrigerator and take the cover off. Now you need to remove the motor and replace it with new one. After that, you need to reassemble everything and start the refrigerator.
1. Is the Ice Maker On?
This simple solution is more common than most people would want to admit. Most GE ice makers have either an on/off switch or a mechanical arm that needs to be down for the ice maker to work. Depending on the model, the on/off switch may be located on the ice maker or be accessed through the refrigerator’s digital display.
2. Is There a Diagnostic Function?
Some GE refrigerators will have a diagnostic function that may be able to identify the problem for you. Check the refrigerator’s manual or tech sheet for instructions to operate the diagnostic mode and interpret the results.
3. Reset the Ice Maker
Sometimes, an issue with the ice maker can be solved by performing a reset. Of course, if a defective part is causing the issue, the part will still need to be repaired or replaced. Often the ice maker will have a reset button or a way to reset it through the digital display panel.
4. Check the Mechanical Arm
As mentioned above, if your ice maker has a mechanical arm, it needs to be down for the ice maker to work. The arm can also fail if the arm’s spring has broken. Check the arm for signs that the spring has broken, and replace the arm if it is found to be defective.
5. Check the Water Filter
Another simple and often overlooked solution is that the water filter needs to be replaced. Some GE refrigerators have a sensor or timer that will stop the ice maker from working if the water filter needs to be changed. This is a safety feature to ensure the ice and water are safe to consume.
6. Is the Water Supply Line Connected?
Check that the water supply line is connected to the refrigerator and ice maker. Also check that the water is turned on. The water supply line can be checked where it connects to the back of the refrigerator and where it connects to the ice maker inside the refrigerator.
7. Check for Cracks in the Ice Tray
If your model features a rotating ice tray, a crack in the ice tray can stop the tray from rotating and emptying the ice. If cracked, it should be replaced.
Why is my GE ice maker not making ice?
GE ice maker not making ice fast enough. The biggest problem that causes this, is having a restricted water line, or not enough water pressure. Check to make sure you are getting at least 20 PSI for water pressure. Then, check to make sure there are no clogs in the waterline.
Why is my GE profile ice maker not working?
The GE Profile’s icemaker may not be working, if there is a problem with the filter, with the door switch, or with the temperature not being correct. You could also have more advanced problems, such as a bad inlet valve, or a blocked-up water line. Having ice when we need it, has become a necessity. Appliances break, and when they do, it can be ...
Why is my GE refrigerator not getting water?
Not getting water can be from more than one issue. You could have a clogged water line, that is clogged with debris, or you could have a frozen water line. Both of these could keep the ice maker from making ice. You will need to inspect the waterline.
How to reset a GE profile ice maker?
Step 1: You will need to pull your GE refrigerator out from the wall and locate the power cord. Pull the power cord out from the outlet, and wait around 60 seconds.
Why won't my refrigerator inlet valve work?
An inlet valve may not work correctly if there is not enough water pressure. First, check your water pressure, to make sure there are no issues, before testing the inlet valve. Always make sure that the refrigerator is unplugged when replacing parts, or testing parts for continuity.
What happens if the door switch on a GE refrigerator goes bad?
If this switch goes bad, then it will cause the ice maker to stop working. You will need to use your multimeter, to test whether or not the door switch is working.
What happens if GE profile ice maker is defective?
The GE Profile ice maker has a water inlet valve, that is electronically controlled. If the valve is defective, it will not open up to let the water in. You will need to use your multimeter, to check the inlet valve for continuity. If it is defective, you will need to replace it.
What temperature does an ice maker need to be?
Freezer Temperature Too Warm. The icemaker must be 15 degrees to produce ice. Normal freezer temperature is around zero degrees F. Ice production can be further increased by decreasing the freezer temperature to -2F.
Does food slow down ice production?
Very little food, or no food, in the refrigerator or freezer sections may slow down the production of ice. More food in the refrigerator allows temperatures to remain more stable. Add bottles of water or other items to add more volume.
How to fix a GE refrigerator that isn't making ice?
When your GE refrigerator isn't making ice, you'll first want to identify the shutoff switch for your refrigerator's ice maker. Shut off this part of the appliance and leave it off for at least 30 seconds. While the power is off, locate the arm within the ice maker, which is a thick wire.
What to do if GE refrigerator ice maker doesn't work?
If your attempts to troubleshoot your refrigerator's ice maker don't work, you may need to order a GE ice maker replacement. Refer to the owner's manual that came with your unit for the manufacturer's phone number. Someone from GE can confirm for you which ice maker you need to order for your particular refrigerator. ...
Can you replace a GE ice maker yourself?
GE may be able to help you locate such an individual or even arrange the repairs for you. It's also possible to replace your GE ice maker yourself. However, if you're at all unsure how to complete the switch, it's best to entrust that project to a pro.
Can you order an ice maker from GE?
Someone from GE can confirm for you which ice maker you need to order for your particular refrigerator. You may need a professional refrigerator repair technician to install your replacement ice maker for you. GE may be able to help you locate such an individual or even arrange the repairs for you.
Can you move a refrigerator without assistance?
In addition, it's best not to move the refrigerator without assistance. Ask a friend or family member to help you move the refrigerator out from the wall. These appliances are extremely heavy and attempting to move them by yourself may result in injury.
Can you reset a GE refrigerator?
It is easy to reset your refrigerator's ice maker. If you have a GE side-by-side refrigerator, chances are good that it also has a built-in ice maker. This feature is a wonderful addition to your appliance as it allows you to get ice whenever you need it. With time, you may need to troubleshoot your refrigerator's ice maker or even reset it.