Test the Door Switch. The door switch on a GE Profile refrigerator, turns off the water and ice maker, while the door is open. If this switch goes bad, then it will cause the ice maker to stop working. You will need to use your multimeter, to test whether or not the door switch is working.
Full Answer
Why is my ge refrigerator ice maker not making ice?
[SOLVED] – Let’s Fix It
- Ice Maker Is OFF If your GE refrigerator ice maker stopped working, the first step is to make sure the ice maker is turned on. ...
- Improper GE Freezer Temperature If a GE ice maker isn’t making ice, it may be too warm. ...
- Ice Maker is Jammed If your GE refrigerator ice maker is not working, it could be because of a particularly common issue. ...
How to fix a GE Profile refrigerator?
- Do NOT open your refrigerator every time you eat something. This can lead to ice buildup and other issues. ...
- Keep an eye on your freezer temperature. ...
- Check your ice maker every month. ...
- Check for seal cracks and crevices in your refrigerator. ...
- Keep an eye out for strange noises. ...
How to fix GE refrigerator ice maker not working?
Some Common Problems
- Reset your ice maker
- Check the filter
- The control arm is in off position
- The door switch is bad
- Water inlet valve
- Water Pressure
- Blockage in the line
- The ice is stuck in the mold. Most of these problems will require a little bit of testing, so make sure you have a multimeter tool, to check parts for ...
How to fix a noisy GE refrigerator?
Steps to Quieting a Noisy fridge
- Clean the Moving Parts. The easiest thing you can do to avoid unnecessary noises is to regularly clean your fridge. ...
- Call the Professionals. If you don’t manage to figure out exactly what’s wrong with your fridge while you’re cleaning it, the next obvious step would be to call in ...
- Separate the Fridge from the Floor. ...
Why is my GE Profile fridge not making ice?
If a GE ice maker isn't making ice, it may be too warm. GE recommends that the freezer should be set to 0 to 5 degrees Fahrenheit for ice production. If it's too hot, ice may not produce well or appear smaller or misshapen. On the other hand, if it's too cold, ice may build up and frost will prevent ejection.
How do I reset my GE ice maker?
Tips for Resetting a GE Ice MakerAdjust the feeler arm. If water doesn't immediately start filling in the reservoir, go to step 2.Press the on/off button.Keep the ice maker unplugged for 15 minutes.Turn the ice maker back on.
Is there a reset button on my GE ice maker?
GE Ice Maker Isn't Working This arm, also called a feeler, is what tells the unit to stop producing ice when it comes into contact with ice cubes. Restore power to the ice maker. Next, push up on the arm or feeler three times. This will reset the unit.
Why is my ice maker not working but water does?
Make sure that the water pressure to the valve is at least 20 psi. If the water pressure is sufficient, use a multimeter to check for power to the water inlet valve. If the water inlet valve has sufficient pressure and is getting power, but the ice maker won't fill with water to make ice, replace the water inlet valve.
How do I force my ice maker to cycle?
If your gear has a small notch in it, then you may need a flat-head screwdriver. Use it to turn your gear counterclockwise until you hear the mentioned click. In both situations, the click that is heard will force the ice maker to cycle.
How do I get my GE refrigerator to make ice?
0:091:37French Door Refrigerator Icemaker Operation - YouTubeYouTubeStart of suggested clipEnd of suggested clipIf you want to turn the icemaker off tap the icemaker or ice button depending on which modelMoreIf you want to turn the icemaker off tap the icemaker or ice button depending on which model refrigerator you have you may have to hold that button for 3 seconds to activate.
How do I troubleshoot my GE ice maker?
0:242:11How to Troubleshoot Icemaker Issues - YouTubeYouTubeStart of suggested clipEnd of suggested clipCheck that the icemaker switch is in the on position. The green light should appear under the switchMoreCheck that the icemaker switch is in the on position. The green light should appear under the switch. When the icemaker is on next make sure that the icemaker.
How do I manually reset my ice maker?
Unplug the machine and wait 10 seconds. Plug the machine back in and press the ON button. You should see a blue light appear, letting you know that the machine has been reset.
Where is the reset button on a GE Profile refrigerator water filter?
GE Profile Filter Reset The water filter warning light or message is reset by pressing the Ice & Water pad on the control panel for three seconds.
Why is my ice maker not dispensing ice?
Typically an ice dispenser uses an auger to get the ice cubes out, but if there are no separate cubes or chunks that can be broken apart by the auger, you will get no ice. Pull out your ice maker and check for clumps near the bottom of the bin or even inside the dispenser itself that will prevent dispensation.
Where is the reset button on my GE refrigerator?
How to Reset a GE RefrigeratorPull your GE refrigerator out from the wall. ... Find the electrical cord going into the wall's electrical outlet. ... Plug your GE refrigerator back into the wall outlet and listen for it to start up again.Open the freezer to the GE refrigerator and find the small shutoff switch on the icemaker.More items...
How do I restart my ice maker?
Unplug the machine and wait 10 seconds. Plug the machine back in and press the ON button. You should see a blue light appear, letting you know that the machine has been reset.
Where is the ice maker switch on a GE refrigerator?
For these refrigerator models, you turn the icemaker ON and OFF using the control panel on the fridge. ON/OFF Toggle Switch: This icemaker design has an ON/OFF switch similar to a light or power switch. ON is at the top of the toggle switch while OFF is at the bottom of the toggle switch.
Why is my GE profile ice maker not working?
The GE Profile’s icemaker may not be working, if there is a problem with the filter, with the door switch, or with the temperature not being correct. You could also have more advanced problems, such as a bad inlet valve, or a blocked-up water line. Having ice when we need it, has become a necessity. Appliances break, and when they do, it can be ...
What happens if GE profile ice maker is defective?
The GE Profile ice maker has a water inlet valve, that is electronically controlled. If the valve is defective, it will not open up to let the water in. You will need to use your multimeter, to check the inlet valve for continuity. If it is defective, you will need to replace it.
Why is my GE refrigerator not getting water?
Not getting water can be from more than one issue. You could have a clogged water line, that is clogged with debris, or you could have a frozen water line. Both of these could keep the ice maker from making ice. You will need to inspect the waterline.
How to reset a GE profile ice maker?
Step 1: You will need to pull your GE refrigerator out from the wall and locate the power cord. Pull the power cord out from the outlet, and wait around 60 seconds.
Why won't my refrigerator inlet valve work?
An inlet valve may not work correctly if there is not enough water pressure. First, check your water pressure, to make sure there are no issues, before testing the inlet valve. Always make sure that the refrigerator is unplugged when replacing parts, or testing parts for continuity.
What happens if the door switch on a GE refrigerator goes bad?
If this switch goes bad, then it will cause the ice maker to stop working. You will need to use your multimeter, to test whether or not the door switch is working.
Why is my GE ice maker not making ice?
GE ice maker not making ice fast enough. The biggest problem that causes this, is having a restricted water line, or not enough water pressure. Check to make sure you are getting at least 20 PSI for water pressure. Then, check to make sure there are no clogs in the waterline.
How to fix a GE refrigerator that won't make ice?
The following are ways to solve the problem of a GE refrigerator not making ice: 1. Set the Temperature Right. Locate the temperature dial on your refrigerator and set each section’s temperature to the right degree. The ideal temperature for the fresh food compartment is 37 degrees Fahrenheit, while that of the freezer is 0 degrees Fahrenheit.
How to keep ice in a refrigerator?
2. Stock Up the Unit Properly. Load the refrigerator up to ¾ full. If the appliance is not properly loaded, it may affect ice production. However, if the refrigerator is full, it will maintain a stable temperature and boost ice production. 3. Ensure the Condenser Fan Is Working.
What happens if a condenser fan is too stiff?
If they are stiff or don’t move freely, the fan motor is most likely defective and should be replaced. The condenser fan cools the refrigerant system. So, if it malfunctions, the refrigerant system will heat up, and as a result, affect ice production. 4.
Why won't my ice maker make ice?
Another possible reason why your ice maker will not make ice is the unstable temperature within the refrigerator. So, ensure your refrigerator’s temperature is always set right. The right temperature for the refrigerating unit is 37 degrees Fahrenheit and 0 degrees Fahrenheit for the freezer.
Where is the condenser coil located?
Depending on the model of your refrigerator, the coils may be found on the back or top of the refrigerator. Then, on some other models, it is located under the appliance behind the base grille.
Can you turn off the ice maker on a refrigerator?
You may have unintentionally turned it off while loading the refrigerator. This is true if the ice maker switch is not on the control panel. Additionally, a defective icemaker switch will affect ice production. If this is the case, you may have to replace the ice maker assembly.
Does a refrigerator make ice?
So, if the refrigerator’s temperature is warmer than usual, it will take a longer time for ice production. Or, the refrigerator will not make ice at all. It is important to note that the temperature dial is located in different places. This depends on the model of the refrigerator.
1. Ice Maker Is OFF
If your GE refrigerator ice maker stopped working, the first step is to make sure the ice maker is turned on. The on/off switch should be a wire arm attached to the ice maker. If it is down, then the ice maker is on. If it is pushed up, then the ice maker is off.
2. Improper GE Freezer Temperature
If a GE ice maker isn’t making ice, it may be too warm. GE recommends that the freezer should be set to 0 to 5 degrees Fahrenheit for ice production. If it’s too hot, ice may not produce well or appear smaller or misshapen. On the other hand, if it’s too cold, ice may build up and frost will prevent ejection.
3. Ice Maker is Jammed
If your GE refrigerator ice maker is not working, it could be because of a particularly common issue. When a piece of ice doesn’t fall into the ice bin, a jam forms around the metal fingers of the ejector’s arm. The water from the melting ice freezes on the fingers, forming an ice bridge that blocks new cubes from being caught.
4. Faulty Water Filter
You should check to be sure that the water filter that you just replaced was installed and connected properly. If the refrigerator water filter was installed wrong, ice cubes will not form in the ice maker and can lead to other problems in the fridge.
5. Water Supply Line Issue
When your water line is not connected to your refrigerator, the water will not flow to the dispenser and you will not get any water or ice. The water shutoff valve on the refrigerator is closed- this prevents the water from coming into the door of the refrigerator.
6. Icemaker Mold Thermostat
The icemaker module has a temperature sensor that automatically dispenses ice when the temperature reaches about 15 degrees Fahrenheit. There are all sorts of complicated components that make up the ice maker module. One of them is the ice ejector. It turns the drum to release ice when it’s time for a refill.
7. Defective Door Switch
The water and ice dispenser in your fridge will turn off automatically when the door is open. To check if it’s working, just use a multimeter to measure the continuity on the door switch. If it doesn’t have continuity, then you’ll need to replace the switch.
1. Incorrect Temperature Settings
If your GE refrigerator’s temperature settings are reading a cool temp but the fridge feels warmer than usual, there’s likely no need to worry. This problem is often a discrepancy between the internal and external temperatures of the device – which means it’s not an actual cooling issue.
2. Overstuffing
Packed with produce, leftovers, and drinks in glass containers, many refrigerators can become too full to keep cool. While keeping refrigerators running smoothly is the best way to protect food, there are some things that can cause cooling issues in fridges.
3. Evaporator Coils Frosted
GE refrigerators —- and most refrigerators, for that matter — have a built-in defrost mechanism. In simple terms, this system removes frost from the refrigerator’s evaporator coils.
4. Check Fan Motors
If one of the two fan motors on your refrigerator is not functioning, it may cause the whole unit to overheat and stop working. The first fan — the condenser fan — keeps the coils cool and functioning properly; when this fan isn’t working, you may notice excessive heat and strange odors coming from your refrigerator and freezer.
5. Check Door Gasket
One of the reasons a refrigerator might lose its cool is if the door doesn’t seal properly. Air that leaks out prevents the temperature from being just right, and it could lead to unfrozen food. If your refrigerator is losing temperature or making an odd noise, check the door seals.
6. Check Light Switch
In a refrigerator, a small lightbulb can cause big problems. The small, low-wattage bulb that comes with a refrigerator is great for adding a little light to your foodstuffs — but it could also be causing your fridge to use more energy than it should.
How Does a GE Refrigerator Ice Maker Work?
Here is the process through which a GE refrigerator ice maker works to make ice:
How to Get a GE Ice Maker to Work
Take a multimeter and test the solenoid of the inlet valve. Check it for power. Also, check the pressure of the water coming to the valve.
Will a GE Ice Maker Work without Filter?
A GE ice maker will work without a water filter but only if there is a bypass plug in place. GE usually adds the bypass plug to the refrigerators that use water filters.
Recap
If your GE ice maker doesn’t work, check the water inlet valve, freezer temperature, ice maker module, switch, thermostat, and even the ice maker itself. Replace the defective ones.
What temperature does an ice maker need to be?
Freezer Temperature Too Warm. The icemaker must be 15 degrees to produce ice. Normal freezer temperature is around zero degrees F. Ice production can be further increased by decreasing the freezer temperature to -2F.
Does food slow down ice production?
Very little food, or no food, in the refrigerator or freezer sections may slow down the production of ice. More food in the refrigerator allows temperatures to remain more stable. Add bottles of water or other items to add more volume.