There are a few reasons why your GE ice maker is not working. They are: 1. Water Inlet Valve Is Malfunctioning The inlet valve is controlled electrically. It gets the power to open and allow water to flow into the ice maker mold. Now if a GE ice maker doesn’t work, look at the valve.
Full Answer
How to fix a GE Profile refrigerator?
- Do NOT open your refrigerator every time you eat something. This can lead to ice buildup and other issues. ...
- Keep an eye on your freezer temperature. ...
- Check your ice maker every month. ...
- Check for seal cracks and crevices in your refrigerator. ...
- Keep an eye out for strange noises. ...
Why is my ge refrigerator not making ice?
What can I do if my ice maker is not working?
- Check your refrigerator and make sure it’s perfectly level.
- Check your ice maker unit and make sure it’s level.
- Check the water supply line for damage, pinching, or kinks.
- Check the fill cup; make sure it’s aligned correctly with the water funnel.
How do I Reset my GE Profile Arctica refrigerator?
Procedure Of Ge refrigerator control board reset
- If you want to reset the control board, there is a simple process to do.
- Turn off the electricity supplier board and unplug the refrigerator.
- The circuit breaker is off for 30 seconds the control board.
- Now you can replace the filter of the refrigerator.
- On this step you can assure the water is turned on the refrigerator at the shut-off valve.
How to troubleshoot GE Profile Arctica fridge problems?
GE Profile Arctica Operation Problems. Check first to make sure that the power cord is plugged in to an operating outlet. If the refrigerator is plugged in, check the fuse or breaker for the outlet to make sure that the fridge is getting power. Check the refrigerator controls. Neither of the controls should be set to zero.
How do I reset my GE refrigerator ice maker?
Tips for Resetting a GE Ice MakerAdjust the feeler arm. If water doesn't immediately start filling in the reservoir, go to step 2.Press the on/off button.Keep the ice maker unplugged for 15 minutes.Turn the ice maker back on.
Why won't my GE Profile refrigerator make ice?
The icemaker must reach a temperature of 16 degrees F before a cycle will begin. If the temperature in the freezer is too warm, ice cubes will take longer to form or may not form at all. Try adjusting the freezer temperature a little lower. A low food load in the freezer can affect the production of ice.
Why did my GE ice maker stop working?
The ice maker switch might be defective. It is also possible that the icemaker switch got turned off by accident. Check the switch to ensure that it is turned on. If the icemaker switch is turned on, but the ice maker still isn't working, use a multimeter to test the switch for continuity.
Why is my ice maker not working but water does?
Make sure that the water pressure to the valve is at least 20 psi. If the water pressure is sufficient, use a multimeter to check for power to the water inlet valve. If the water inlet valve has sufficient pressure and is getting power, but the ice maker won't fill with water to make ice, replace the water inlet valve.
Where is the ice maker switch on a GE refrigerator?
For these refrigerator models, you turn the icemaker ON and OFF using the control panel on the fridge. ON/OFF Toggle Switch: This icemaker design has an ON/OFF switch similar to a light or power switch. ON is at the top of the toggle switch while OFF is at the bottom of the toggle switch.
How do you troubleshoot an ice maker?
1:025:02Ice Maker Not Working? - Check these 6 Things first! - YouTubeYouTubeStart of suggested clipEnd of suggested clipUsually on all ice makers there's an on off switch you want to find out where that's at on thisMoreUsually on all ice makers there's an on off switch you want to find out where that's at on this particular. Model it's an easy on off switch right here if it's not on the on.
How do I force my ice maker to cycle?
If your gear has a small notch in it, then you may need a flat-head screwdriver. Use it to turn your gear counterclockwise until you hear the mentioned click. In both situations, the click that is heard will force the ice maker to cycle.
Why is my ice maker not dispensing ice?
Typically an ice dispenser uses an auger to get the ice cubes out, but if there are no separate cubes or chunks that can be broken apart by the auger, you will get no ice. Pull out your ice maker and check for clumps near the bottom of the bin or even inside the dispenser itself that will prevent dispensation.
Why does my GE refrigerator stop making ice?
Some GE refrigerators have an ice level control board that operates an infrared beam that signals the ice maker to stop making ice when the ice bucket reaches a certain level. If there is a fault with the ice level control board, the ice maker will stop making ice. If the ice level control board is defective, it should be replaced to fix the issue.
How to reset a refrigerator ice maker?
Often the ice maker will have a reset button or a way to reset it through the digital display panel. Other models may have a “test” button or a place to insert a pin to reset the ice maker. Turning the power to the refrigerator off for five minutes can also reset the ice maker. Check the refrigerator’s manual for ice maker reset instructions.
What to do if ice tray thermostat is bad?
If there is a fault with the ice tray thermostat, the ice maker will not know when water is required or when ice should be emptied from the ice tray. If you suspect the ice tray thermostat, test it with a multimeter for continuity. If defective, the thermostat will need to be replaced.
Why does my ice maker hum?
The water inlet valve can become defective if the valve becomes blocked with mineral deposits, which stop the valve from opening. An unusual hum coming from the refrigerator when the ice maker should be filling up with water indicates a blocked valve. If the valve is blocked, it is recommended that the valve be replaced.
How to fix a frozen water line?
Depending on where the ice blockage or freeze has occurred, you may be able to use a dishcloth with hot water, a blow dryer, the defrost function, or a defrost tool to fix the issue. A frozen water line tool can be purchased online or from a hardware store to clear a frozen water line. Removing the ice maker from the refrigerator and allowing it to defrost may also solve the issue.
What to do if ice maker switch is defective?
If the ice maker switch seems defective, test it for continuity with a multimeter to determine if it needs to be replaced.
Why does my ice maker need to be down?
As mentioned above, if your ice maker has a mechanical arm, it needs to be down for the ice maker to work. The arm can also fail if the arm’s spring has broken. Check the arm for signs that the spring has broken, and replace the arm if it is found to be defective.
How Does a GE Refrigerator Ice Maker Work?
Here is the process through which a GE refrigerator ice maker works to make ice:
What is the inlet valve on a GE ice maker?
The inlet valve is controlled electrically. It gets the power to open and allow water to flow into the ice maker mold. Now if a GE ice maker doesn’t work, look at the valve.
Why does my ice maker pull up under the ice maker?
If the ice maker has a feeler arm, it goes up to turn the ice maker off once ice fills the mold or bucket. And if it is a paddle, it pulls in under the ice maker for the same reason.
Why is my refrigerator so cold?
Dirty condenser coils are also another factor to consider. If a significant amount of dirt builds on them, the refrigerator will have a hard time keeping the temperature cold.
Why does a valve fail?
If the valve fails, it is usually because the solenoid is no longer receiving power or is defective.
What temperature does an ice maker eject?
A soon as the mold gets to a preset temperature, usually 15 degrees Fahrenheit, the ejector blades eject the ice and a new cycle begins.
What is the job of the thermostat in an ice maker?
Once water fills the mold, the freezing begins. There is a thermostat in the ice maker. Its job is to keep an eye on the water temperature.
Check the drain valve
This is the first step and the most important thing to check. You need to open the ice maker drawer and check if there is any water inside it. If it is empty then you can easily check the drain valve. You need to remove the cover and then turn the valve by hand. If there is water in the container then you can easily fix the issue.
Check the ice maker
It is also an important step and it will help you to find out the exact problem. You need to open the freezer drawer and check if the ice maker is working properly. If it isn’t then you need to change the motor.
Check the power supply
You need to check the power supply as it can also be a problem for your refrigerator. You need to open the main panel and check if the power supply is damaged or not.
Check the cooling system
It is one of the most important parts of your refrigerator. If there is a problem in the cooling system then it may start leaking water. You need to take the cover off and check if there is any water leakage. If it is leaking then you need to call a professional.
Change the water line
If you have any leak in the water line then you can easily fix this by replacing the water line. You need to remove the cover of the water line and clean it with some soap and water. After that, you need to replace the cover and switch on the faucet.
Fix the problem
Now, when you know the exact reason for the problem then you can easily fix the issue. You need to turn off the refrigerator and take the cover off. Now you need to remove the motor and replace it with new one. After that, you need to reassemble everything and start the refrigerator.
What temperature does an icemaker need to be?
The icemaker must reach a temperature of 16 degrees F before a cycle will begin.
What can restrict water flow to the icemaker?
A clogged water filter can restrict water flow to the icemaker.
What happens if the rake that ejects the cubes from the ice mold is stuck?
If the rake that ejects the cubes from the ice mold is stuck, the icemaker cannot complete its cycle.
What temperature should a refrigerator be at?
The refrigerator and icemaker must be at the proper temperature. The recommended fresh food temperature setting is 37 degrees F and the recommended freezer temperature setting is 0 degrees F.
Why won't my freezer dispense ice?
The dispenser door motor opens and closes the dispenser door to prevent cold air from escaping the freezer. If the dispenser door motor is defective, the dispenser door won’t open. As a result, the dispenser will not dispense ice. To determine if the motor is defective, first determine if the motor is getting power. If the motor is getting power, but it won’t run, replace it. You can use a multimeter to test the motor for continuity. If the dispenser door motor does not have continuity, replace ...
How to tell if a dispenser switch is defective?
To determine if a dispenser switch is defective, use a multimeter to test each switch for continuity. If a dispenser switch does not have continuity, replace it.
What to do if dispenser solenoid is defective?
To determine if the dispenser door solenoid is defective, use a multimeter to test it for continuity. In addition, check the dispenser actuator pin to ensure that it moves freely.
What happens if the dispenser actuator is broken?
If the dispenser actuator is broken, it may not activate the switches properly or at all. Inspect the dispenser actuator—if it is broken, replace it.
How to tell if an auger motor is defective?
To determine if the auger motor is defective, pull out the ice bucket and turn the bucket auger by hand. If the auger turns freely, use a multimeter to test the auger motor for continuity.
What happens if a dispenser control board is faulty?
If the control board is faulty, it may stop supplying power to the entire dispenser system. If only one dispenser part is not working, test each of the dispenser components before testing the control board. It is more likely that a single part has failed. If the entire dispenser system is not working, the control board is more likely to be at fault.
What to do if an auger turns freely?
If the auger turns freely, use a multimeter to test the auger motor for continuity. If the auger motor does not have continuity, or if the motor is getting power but won’t run, replace the auger motor. Required Part. Refrigerator Auger Motor.