Here are a few things you can do to fix your GE profile ice maker: Changing the water filter: A clogged water filter is one of the most common issues behind an ice maker not working. GE ice makers also come with built-in sensors that stop the ice makers from making ice when the filter stops working.
Full Answer
How do you reset a GE ice maker?
How Do You Reset Temperature On A GE French Door Refrigerator? To reset the temperature on your GE French door fridge, tap on the pad on the temperature display to adjust and reset to fit your preference. If you want to reset the freezer, do the same thing just choose the pad for the freezer in this case.
Why is my ge ice maker not making ice?
Why is my GE icemaker not making ice? If the water inlet valve is defective, or if it has insufficient pressure, it won't allow water to flow through. As a result, the ice maker won't make ice.
Why is my ge refrigerator ice maker not working?
Some Common Problems
- Reset your ice maker
- Check the filter
- The control arm is in off position
- The door switch is bad
- Water inlet valve
- Water Pressure
- Blockage in the line
- The ice is stuck in the mold. Most of these problems will require a little bit of testing, so make sure you have a multimeter tool, to check parts for ...
How to troubleshoot a GE Monogram icemaker?
- Locate the shut-off switch on the front of the GE refrigerator ice maker and turn the switch off, leaving it off for at least 30 seconds.
- Turn the switch back on and locate the feeler arm on the ice maker.
- Push the feeler arm up three times quickly to reset the ice maker.
How do I reset my GE Profile refrigerator ice maker?
This arm, also called a feeler, is what tells the unit to stop producing ice when it comes into contact with ice cubes. Restore power to the ice maker. Next, push up on the arm or feeler three times. This will reset the unit.
Why is my GE Profile refrigerator ice maker not working?
Check the Water Filter Another simple and often overlooked solution is that the water filter needs to be replaced. Some GE refrigerators have a sensor or timer that will stop the ice maker from working if the water filter needs to be changed. This is a safety feature to ensure the ice and water are safe to consume.
Why is my ice maker not working but water does?
Cause: There is also a possibility that the water filter for the ice maker is clogged. Fix: Locate and replace the water filter. Filters for ice makers are typically located inside the refrigerator (to keep them from freezing).
How do I troubleshoot my GE ice maker?
0:242:11How to Troubleshoot Icemaker Issues - YouTubeYouTubeStart of suggested clipEnd of suggested clipCheck that the icemaker switch is in the on position. The green light should appear under the switchMoreCheck that the icemaker switch is in the on position. The green light should appear under the switch. When the icemaker is on next make sure that the icemaker.
Where is the reset button on GE ice maker?
Remove the ice tray to locate it. Remove the ice tray. The red button you see is the reset button. Some GE ice makers do not have a reset button.
Why is my ice maker not dispensing ice?
Typically an ice dispenser uses an auger to get the ice cubes out, but if there are no separate cubes or chunks that can be broken apart by the auger, you will get no ice. Pull out your ice maker and check for clumps near the bottom of the bin or even inside the dispenser itself that will prevent dispensation.
How do I force my ice maker to cycle?
If your gear has a small notch in it, then you may need a flat-head screwdriver. Use it to turn your gear counterclockwise until you hear the mentioned click. In both situations, the click that is heard will force the ice maker to cycle.
How do I unclog my ice maker water line?
Pour some distilled Vinegar into a cup and pour it down the tube. (If your fridge has an ice maker as well, turn it on so that the vinegar will clean the ice maker system as well) Try to get a bottle brush to dip the end in the vinegar this way you can clean inside the water sprout as well.
How do I reset my ice maker?
Unplug the machine and wait 10 seconds. Plug the machine back in and press the ON button. You should see a blue light appear, letting you know that the machine has been reset.
How Does a GE Refrigerator Ice Maker Work?
Here is the process through which a GE refrigerator ice maker works to make ice:
How to Get a GE Ice Maker to Work
Take a multimeter and test the solenoid of the inlet valve. Check it for power. Also, check the pressure of the water coming to the valve.
Will a GE Ice Maker Work without Filter?
A GE ice maker will work without a water filter but only if there is a bypass plug in place. GE usually adds the bypass plug to the refrigerators that use water filters.
Recap
If your GE ice maker doesn’t work, check the water inlet valve, freezer temperature, ice maker module, switch, thermostat, and even the ice maker itself. Replace the defective ones.
How to increase the temperature of an ice maker?
Typically, C and 5 or 5 and 5. Set it to the appropriate point, according to your manual. Otherwise, press the (-) button on the Freezer side to increase the temperature. 2. Low Water Pressure. The water pressure that goes into the refrigerator could cause the ice maker to freeze.
What does it mean when your ice maker is malfunctioning?
If this is the case, it means the ice maker could display all sorts of issues, including the freezing problem. You can test different parts of the ice maker.
Why does my GE refrigerator keep freezing?
The following are possible reasons why your GE refrigerator ice maker keeps freezing up and ways to fix them: 1. Low Freezer Temperature. If the temperature in the freezer is lower than the recommended setting, increase it to the right point. Usually, the recommended setting is 0 degrees Fahrenheit for freezers and 37 degrees Fahrenheit ...
What causes water to freeze in ice maker?
Defective Water Inlet Valve. If the valve is defective, it can cause too much water to flow into the ice maker. And if this happens, the excess water will freeze up around the ice maker. Therefore, check the inlet valve to see if it is defective.
Why does my freezer freeze so quickly?
The low temperature will cause anything in the freezer to freeze too quickly and easily. This includes the ice maker. And this is usually the primary culprit when the ice maker starts freezing up. Turn the control knob to a midway point if your temperature control is analog. Typically, C and 5 or 5 and 5.
How to keep refrigerator from freezing?
The best way to do this is to disconnect the refrigerator from power for a little while. Allow the ice to melt before reconnecting it. If the line continues to get frozen, you can insulate it with a piping material. Also, increasing the temperature in the freezer will help keep the line from constantly freezing. 6.
What is the water inlet valve on an ice maker?
The water inlet valve is responsible for allowing water to fill the ice mold inside the ice maker. It opens for a number of seconds until the mold fills up. Then it closes so the freezing process can begin. If it malfunctions, it can cause little or too much water to fill the ice maker.
How many icemakers does GE have?
GE has two style icemakers and they are old mechanical style and the newer electronic style. Repairing these two icemakers is very different from one to the other and this GE icemaker repair guide will explain each one in detail. When repairing icemakers it is important to know how much ice the icemaker should produce.
How long does it take to turn off an icemaker?
If its not the spring turn the icemaker off (some have a switch and some you will have to unplug) for at least 30 seconds. Then turn it back on and press in on the feeler arm three times within 15 seconds of turning the icemaker back on. If done correctly the icemaker will go through a cycle and run water.
What is the arm on an icemaker called?
There is an arm (you might look at it as a paddle) on the side of the icemaker called a feeler arm . This arm moves back and forth to “tell” the icemaker when the ice bin is full. When the feeler arm touches the ice it’s supposed to stop indicating that the ice bin is full and the icemaker will stop making ice.
What happens if the icemaker doesn't complete the cycle?
If the icemaker completes the cycle and water runs in either the temperature inside the freezer is too warm (should be between 0-12 degrees) or the thermostat inside the icemaker is bad.
What should happen if an icemaker stops?
If it completes the cycle and stops and no water enters the icemaker, the water valve is bad and needs replacing. If the icemaker will not complete the cycle replace the icemaker.
What to do if your refrigerator is clogged with ice?
If it is clogged with ice, pull it out the back of the refrigerator and clean all the ice out with hot water. The water valve causes this problem so replace the water valve or it will happen again. Feeler Arm. The feeler arm is the wire arm that shuts the icemaker down then it hits the ice.
How long does it take for an ice maker to fill?
Typically it will take 24-48 hours for an icemaker bin to fill and longer if the refrigerator is just starting up. If your icemaker is producing ice but slowly, the first thing to check before going through troubleshooting steps provided on this page is the temperature in the freezer.
1. Is the Ice Maker On?
This simple solution is more common than most people would want to admit. Most GE ice makers have either an on/off switch or a mechanical arm that needs to be down for the ice maker to work. Depending on the model, the on/off switch may be located on the ice maker or be accessed through the refrigerator’s digital display.
2. Is There a Diagnostic Function?
Some GE refrigerators will have a diagnostic function that may be able to identify the problem for you. Check the refrigerator’s manual or tech sheet for instructions to operate the diagnostic mode and interpret the results.
3. Reset the Ice Maker
Sometimes, an issue with the ice maker can be solved by performing a reset. Of course, if a defective part is causing the issue, the part will still need to be repaired or replaced. Often the ice maker will have a reset button or a way to reset it through the digital display panel.
4. Check the Mechanical Arm
As mentioned above, if your ice maker has a mechanical arm, it needs to be down for the ice maker to work. The arm can also fail if the arm’s spring has broken. Check the arm for signs that the spring has broken, and replace the arm if it is found to be defective.
5. Check the Water Filter
Another simple and often overlooked solution is that the water filter needs to be replaced. Some GE refrigerators have a sensor or timer that will stop the ice maker from working if the water filter needs to be changed. This is a safety feature to ensure the ice and water are safe to consume.
6. Is the Water Supply Line Connected?
Check that the water supply line is connected to the refrigerator and ice maker. Also check that the water is turned on. The water supply line can be checked where it connects to the back of the refrigerator and where it connects to the ice maker inside the refrigerator.
7. Check for Cracks in the Ice Tray
If your model features a rotating ice tray, a crack in the ice tray can stop the tray from rotating and emptying the ice. If cracked, it should be replaced.
Reasons for Knocking Sound in my GE ice maker
You need to understand that the knocking sound does not necessarily mean that your Fridge is undergoing a terrific issue that requires an investigation. More often than not, Fridge owners find that this sound is easily treatable and diagnosable without the service of experienced personnel.
Vibration and placement
The place you install the ice maker sometimes can determine whether the device should produce sounds or not. While installing, the instructions on the user manual could likely recommend placing the ice maker on an even and stable surface.
Conclusion
You need to understand that there are various causatives that make your ice maker produce a loud noise while operating. Knocking sounds become common, but luckily fixing some of the issues is simple. Additionally, your appliance might be producing normal sounds like fan speed; this should not stress you.