GE Icemaker Repair Guide
- Fill Tube. The next thing you should do is look at the fill tube to see if it is clogged with ice. If it is clogged with...
- Feeler Arm. The feeler arm is the wire arm that shuts the icemaker down then it hits the ice. There is a spring inside...
- Jump-Start. Next thing you should do is jump-start the icemaker. To do this pull on the rake arm as...
Full Answer
How do I Reset my GE ice maker?
- Open the freezer door to remove the ice bin from below the ice maker.
- Empty the ice from the bin.
- Press the ice maker toggle switch to the "On" setting if it is not already activated.
- Pop off the front cover of the ice maker with the tip of a flat-blade screwdriver.
How to reset GE ice maker?
How to Reset the Ice Maker on a GE Side by Side Refrigerator Locate the shut-off switch on the front of the GE refrigerator ice maker and turn the switch off, leaving it off for at least 30 seconds. Turn the switch back on and locate the feeler arm on the ice maker. Push the feeler arm up three times quickly to reset the ice maker.
How to fix GE refrigerator ice maker not working?
Some Common Problems
- Reset your ice maker
- Check the filter
- The control arm is in off position
- The door switch is bad
- Water inlet valve
- Water Pressure
- Blockage in the line
- The ice is stuck in the mold. Most of these problems will require a little bit of testing, so make sure you have a multimeter tool, to check parts for ...
How to troubleshoot a GE Monogram icemaker?
- Locate the shut-off switch on the front of the GE refrigerator ice maker and turn the switch off, leaving it off for at least 30 seconds.
- Turn the switch back on and locate the feeler arm on the ice maker.
- Push the feeler arm up three times quickly to reset the ice maker.
How do I reset my GE ice maker?
GE Ice Maker Isn't Working This arm, also called a feeler, is what tells the unit to stop producing ice when it comes into contact with ice cubes. Restore power to the ice maker. Next, push up on the arm or feeler three times. This will reset the unit.23-Apr-2020
Why is my GE icemaker not making ice?
The icemaker must reach a temperature of 16 degrees F before a cycle will begin. If the temperature in the freezer is too warm, ice cubes will take longer to form or may not form at all. Try adjusting the freezer temperature a little lower. A low food load in the freezer can affect the production of ice.
How do I manually reset my ice maker?
Turn The Ice Maker Off and On Again This is a simple matter of resetting the power to your ice maker. By flipping the switch off and back on, you may be able to reset the functionality so that your ice maker begins to dispense ice again.13-Jul-2020
How do you force a GE ice maker to cycle?
Turn on the motor until it reaches home the next time. Turn on the water valve for 1/2 second. Tum on the heater for 1/2 second. Verify that the feeler arm was in the "in" and then in the "out" position.05-Aug-2013
Will unplugging my fridge reset the ice maker?
Leave the refrigerator unplugged for 5 minutes. This will allow the ice system to reset. After 5 minutes, replug the refrigerator and turn the switch back on. This should cause the ice maker to start working again.
How long does it take for the ice maker to reset?
Allow 8 hours for ice production to get back to normal. If ice piles up at one end of the bucket, the ice maker will think it is full and stop ice production.
How do you unfreeze an ice maker?
How to Defrost an Ice MakerUnplug the refrigerator and remove any ice from the ice maker and the ice tray. ... Locate the water refill tube that runs to the ice maker. ... Turn a hair dryer on low speed and point it at the refill tube to defrost. ... Replace the metal clip and the ice tray before plugging in the refrigerator.
How do you jumpstart a GE ice maker?
On GE icemakers made after the year 2000, you jump the icemaker by turning it off for more than 30 seconds. Now turn the icemakers back on and push the feeler arm in three times within 15 seconds after turning it on. Be sure to only push it three times because if you push it more it won't run water in.
Is there a reset button on a GE ice maker?
Fix: To repair a frozen line, slide the refrigerator and unplug it. Look for the Reset Button Once you do that, you should see the bright red reset button on the bottom of the ice maker itself. To reset the ice maker, push this button in and hold it for 10 seconds.11-Jan-2020
Why does ice take so long to form?
If the temperature in the freezer is too warm, ice cubes will take longer to form or may not form at all. Try adjusting the freezer temperature a little lower. A low food load in the freezer can affect the production of ice.
What temperature should a refrigerator be at?
The refrigerator and icemaker must be at the proper temperature. The recommended fresh food temperature setting is 37 degrees F and the recommended freezer temperature setting is 0 degrees F.
1. Is the Ice Maker On?
This simple solution is more common than most people would want to admit. Most GE ice makers have either an on/off switch or a mechanical arm that needs to be down for the ice maker to work. Depending on the model, the on/off switch may be located on the ice maker or be accessed through the refrigerator’s digital display.
2. Is There a Diagnostic Function?
Some GE refrigerators will have a diagnostic function that may be able to identify the problem for you. Check the refrigerator’s manual or tech sheet for instructions to operate the diagnostic mode and interpret the results.
3. Reset the Ice Maker
Sometimes, an issue with the ice maker can be solved by performing a reset. Of course, if a defective part is causing the issue, the part will still need to be repaired or replaced. Often the ice maker will have a reset button or a way to reset it through the digital display panel.
4. Check the Mechanical Arm
As mentioned above, if your ice maker has a mechanical arm, it needs to be down for the ice maker to work. The arm can also fail if the arm’s spring has broken. Check the arm for signs that the spring has broken, and replace the arm if it is found to be defective.
5. Check the Water Filter
Another simple and often overlooked solution is that the water filter needs to be replaced. Some GE refrigerators have a sensor or timer that will stop the ice maker from working if the water filter needs to be changed. This is a safety feature to ensure the ice and water are safe to consume.
6. Is the Water Supply Line Connected?
Check that the water supply line is connected to the refrigerator and ice maker. Also check that the water is turned on. The water supply line can be checked where it connects to the back of the refrigerator and where it connects to the ice maker inside the refrigerator.
7. Check for Cracks in the Ice Tray
If your model features a rotating ice tray, a crack in the ice tray can stop the tray from rotating and emptying the ice. If cracked, it should be replaced.
Why is my GE ice maker not making ice?
GE ice maker not making ice fast enough. The biggest problem that causes this, is having a restricted water line, or not enough water pressure. Check to make sure you are getting at least 20 PSI for water pressure. Then, check to make sure there are no clogs in the waterline.
Why is my GE profile ice maker not working?
The GE Profile’s icemaker may not be working, if there is a problem with the filter, with the door switch, or with the temperature not being correct. You could also have more advanced problems, such as a bad inlet valve, or a blocked-up water line. Having ice when we need it, has become a necessity. Appliances break, and when they do, it can be ...
Why is my GE refrigerator not getting water?
Not getting water can be from more than one issue. You could have a clogged water line, that is clogged with debris, or you could have a frozen water line. Both of these could keep the ice maker from making ice. You will need to inspect the waterline.
How to reset a GE profile ice maker?
Step 1: You will need to pull your GE refrigerator out from the wall and locate the power cord. Pull the power cord out from the outlet, and wait around 60 seconds.
Why won't my refrigerator inlet valve work?
An inlet valve may not work correctly if there is not enough water pressure. First, check your water pressure, to make sure there are no issues, before testing the inlet valve. Always make sure that the refrigerator is unplugged when replacing parts, or testing parts for continuity.
What happens if the door switch on a GE refrigerator goes bad?
If this switch goes bad, then it will cause the ice maker to stop working. You will need to use your multimeter, to test whether or not the door switch is working.
What happens if GE profile ice maker is defective?
The GE Profile ice maker has a water inlet valve, that is electronically controlled. If the valve is defective, it will not open up to let the water in. You will need to use your multimeter, to check the inlet valve for continuity. If it is defective, you will need to replace it.
How long does it take for an opal ice maker to flush?
At the start of ice making, the Opal will flush the system with water for approximately 5 minutes.
How long does it take for an opal to make ice nuggets?
After approximately 30 minutes the Opal will be making standard ice nuggets. During operation, the provided metal screen or the approved water filter must be in place at the water inlet located at the bottom right corner of the reservoir.
Does opal ice machine void warranty?
Failure to use either of these devices will create a risk of damaging your machine and will void the warranty. Opal uses a refrigeration system to turn the water into ice - this warm air is a normal by-product of the refrigeration process. Clean the Opal following the instructions in your model's Owner's Manual.
1. Ice Maker Is OFF
If your GE refrigerator ice maker stopped working, the first step is to make sure the ice maker is turned on. The on/off switch should be a wire arm attached to the ice maker. If it is down, then the ice maker is on. If it is pushed up, then the ice maker is off.
2. Improper GE Freezer Temperature
If a GE ice maker isn’t making ice, it may be too warm. GE recommends that the freezer should be set to 0 to 5 degrees Fahrenheit for ice production. If it’s too hot, ice may not produce well or appear smaller or misshapen. On the other hand, if it’s too cold, ice may build up and frost will prevent ejection.
3. Ice Maker is Jammed
If your GE refrigerator ice maker is not working, it could be because of a particularly common issue. When a piece of ice doesn’t fall into the ice bin, a jam forms around the metal fingers of the ejector’s arm. The water from the melting ice freezes on the fingers, forming an ice bridge that blocks new cubes from being caught.
4. Faulty Water Filter
You should check to be sure that the water filter that you just replaced was installed and connected properly. If the refrigerator water filter was installed wrong, ice cubes will not form in the ice maker and can lead to other problems in the fridge.
5. Water Supply Line Issue
When your water line is not connected to your refrigerator, the water will not flow to the dispenser and you will not get any water or ice. The water shutoff valve on the refrigerator is closed- this prevents the water from coming into the door of the refrigerator.
6. Icemaker Mold Thermostat
The icemaker module has a temperature sensor that automatically dispenses ice when the temperature reaches about 15 degrees Fahrenheit. There are all sorts of complicated components that make up the ice maker module. One of them is the ice ejector. It turns the drum to release ice when it’s time for a refill.
7. Defective Door Switch
The water and ice dispenser in your fridge will turn off automatically when the door is open. To check if it’s working, just use a multimeter to measure the continuity on the door switch. If it doesn’t have continuity, then you’ll need to replace the switch.