Receiving Helpdesk

ge ice maker replacement kit

by Sylvester Okuneva PhD Published 3 years ago Updated 2 years ago

How to replace an icemaker in a GE refrigerator?

How to Reset the Ice Maker on a GE Side by Side Refrigerator

  • Important Safety Considerations. Before you begin any repairs or troubleshooting involving your refrigerator, be sure it's unplugged.
  • GE Ice Maker Isn't Working. When your GE refrigerator isn't making ice, you'll first want to identify the shutoff switch for your refrigerator's ice maker.
  • Temperature Considerations. ...
  • Continued Troubleshooting. ...

Why is my ge ice maker not making ice?

Why is my GE icemaker not making ice? If the water inlet valve is defective, or if it has insufficient pressure, it won't allow water to flow through. As a result, the ice maker won't make ice.

Why is my ge refrigerator ice maker not working?

Some Common Problems

  • Reset your ice maker
  • Check the filter
  • The control arm is in off position
  • The door switch is bad
  • Water inlet valve
  • Water Pressure
  • Blockage in the line
  • The ice is stuck in the mold. Most of these problems will require a little bit of testing, so make sure you have a multimeter tool, to check parts for ...

How to install a replacement ice maker?

■The ice maker must be installed in an area sheltered from the elements, such as wind, rain, water spray, or drip. ■When installing the ice maker under a counter, follow the recommended opening dimensions shown. Place electrical and plumbing fixtures in the recommended location as shown.

Where is the part number on a GE ice maker?

The rating tag with the model and serial number is located on the inside of the ice storage area at the top on models UNC15 and UCC15.

How do you replace a GE refrigerator ice maker?

0:243:02GE Refrigerator Ice Maker Assembly Replacement WR30X10093YouTubeStart of suggested clipEnd of suggested clipBefore you begin the procedure unplug the appliance's power cord open the freezer door and pull outMoreBefore you begin the procedure unplug the appliance's power cord open the freezer door and pull out the ice. Bucket. Use the small flat head screwdriver to help disconnect the ice wire harness.

How do you replace an ice maker kit?

2:167:33How To: Whirlpool/KitchenAid/Maytag Icemaker Kit 4317943 - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd pop the electrical connection off all you have to do is release the tab. Once you have itMoreAnd pop the electrical connection off all you have to do is release the tab. Once you have it disconnected you can pull the icemaker out here's the old icemaker next to the new ice maker.

How much is an ice maker for a GE refrigerator?

Compare with similar itemsThis item GE WR30X10093 Refrigerator Icemaker Kit , WHITEGeneral Electric Refrigerator IM6D Icemaker Kit, WhiteCustomer Rating4.5 out of 5 stars (1796)4.4 out of 5 stars (83)Price$14500$10999Sold ByAmazon.comGE Appliances, a Haier companyColorWHITEWhite4 more rows

Why did my GE ice maker stop working?

The icemaker may have stopped working. A common problem with an icemaker going bad is a clogged water line, which causes a build up of ice. The GE icemaker has a filter that may need to be cleaned or replaced, a door switch that may be malfunctioning, or the temperature may not be set correctly.

How do I fix my ice maker to stop working?

4:065:02Ice Maker Not Working? - Check these 6 Things first! - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd the water line you want to make sure it's not kinked it's not clogged. So how to do that is youMoreAnd the water line you want to make sure it's not kinked it's not clogged. So how to do that is you pull the fridge out make sure it's unplugged. Turn the water.

Where is the model number on my ice maker?

0:261:45Ice Machine– How to Find the Model Number - YouTubeYouTubeStart of suggested clipEnd of suggested clipThis label can often be found on the ceiling or the inside wall of either the refrigerator or theMoreThis label can often be found on the ceiling or the inside wall of either the refrigerator or the freezer. Inside the door on the wall behind the lower crisper drawer.Ice Machine– How to Find the Model Number - YouTubehttps://www.youtube.com › watchhttps://www.youtube.com › watchSearch for: Where is the model number on my ice maker?

How do you install an icemaker kit?

1:242:48How to Install a Refrigerator Ice Maker Kit - YouTubeYouTubeStart of suggested clipEnd of suggested clipPlug. In the icemaker wire harness push the plastic wire harness cover over the plug and snap itMorePlug. In the icemaker wire harness push the plastic wire harness cover over the plug and snap it into place hang. The icemaker on the mounting screws.How to Install a Refrigerator Ice Maker Kit - YouTubehttps://www.youtube.com › watchhttps://www.youtube.com › watchSearch for: How do you install an icemaker kit?

What can I use instead of a saddle valve?

A similarly DIY-friendly but more reliable alternative to a saddle valve is a push-fit tee connector designed for ice makers and water dispensers. You install these by cutting out a short section of pipe and installing the tee right into the water line, then adding the small supply line leading to the appliance.May 6, 2022How to Install a Self-Piercing Saddle Valve - The Sprucehttps://www.thespruce.com › how-to-install-needle-saddle...https://www.thespruce.com › how-to-install-needle-saddle...Search for: What can I use instead of a saddle valve?

For California Residents

Connect to WiFi for real-time feedback, optimized performance, alerts and more.

Does the IM6 work with model top freezer frig GTH18GBDDRBB?

Hi tuknshak- Yes, the IM6 Icemaker is compatible with your refrigerator model GTH18GBDDRBB. Thanks for checking with us!

Hello I'm looking for an ice make for my Canadian fridge model GDR20ESEARBS. Just wondering which model I could install and where would be the best place to purchase the kit. Thank you!!

Hi Gqjoe- For assistance with your Canadian appliances, please visit the following link: http://products.geappliances.com/appliance/gea-support-search-content?contentId=15895

Hello, will this ice maker work with GE gth17jbd4rww? If not, what will. Thank you!

Hi Mjv4998- Yes, the IM6 Icemaker Kit is compatible with your refrigerator model gth17jbd4rww. Thanks for checking with us. Enjoy!

Hello, Please tell me which replacement ice maker I need for GE model gts18fbsarww. Thank you

Hi Robert Folsom - thank you for reaching out to GE Appliances and happy to clarify.

started having problems with the IM-6 in our fridg. first the inlet hose froze up & blew the hose out the back .- fixed that and now it just seems to run when it wants to. this has an adjustment screw on the front & I would like to know what this does

Hi smartfeller-this is Sue from GE. We are happy to help. The adjustment screw is used by service technicians to adjust the water flow into the icemaker. Ice production is dependent on freezer temperatures. The icemaker must reach a temperature of approximately 15-16 degrees F. before a cycle is initiated.

Will this work on GE model GTS201CNCWW

Hi Bob Mitch- GTS20ICNCWW has a factory installed icemaker. The replacement part number is WR30X10093. You can order online at: https://www.geapplianceparts.com/store/parts/spec/WR30X10093

How long is the warranty on an icemaker?

Icemaker Kits have a one year warranty. Problems resulting from installation are not considered manufacturing defects and are not covered by warranty. On the IM4D with the 6-prong cord, make sure the safety outlet cover (may appear to look like a 2-prong outlet) has been removed.

How long does it take for an ice maker to cool down?

With a new installation, it may take 12-24 hours before the icemaker cools down enough (15 degrees F) to call for water. To get faster ice service when necessary, change both the freezer and the refrigerator temperature controls to a colder setting.

How big of a tubing do I need to connect a refrigerator to a hot water line?

Needs ¼" outer diameter to connect the refrigerator to the water supply. If using copper, be sure both ends of the tubing are cut square. DO NOT connect icemaker to a hot water line.

A B C D E F G H I J K L M N O P Q R S T U V W X Y Z 1 2 3 4 5 6 7 8 9
8.3.17PHP Version707msRequest Duration2MBMemory UsageGET {post}Route
  • warninglog[09:32:21] LOG.warning: Creation of dynamic property Barryvdh\Debugbar\DataFormatter\QueryFormatter:...
  • warninglog[09:32:21] LOG.warning: Creation of dynamic property Barryvdh\Debugbar\DataFormatter\QueryFormatter:...
  • warninglog[09:32:21] LOG.warning: Callables of the form ["Swift_SmtpTransport", "Swift_Transport_EsmtpTranspor...
  • warninglog[09:32:21] LOG.warning: Creation of dynamic property Barryvdh\Debugbar\DataFormatter\SimpleFormatter...
  • warninglog[09:32:21] LOG.warning: Creation of dynamic property Barryvdh\Debugbar\DataFormatter\SimpleFormatter...
  • warninglog[09:32:21] LOG.warning: json_decode(): Passing null to parameter #1 ($json) of type string is deprec...
  • warninglog[09:32:21] LOG.warning: json_decode(): Passing null to parameter #1 ($json) of type string is deprec...
  • warninglog[09:32:21] LOG.warning: json_decode(): Passing null to parameter #1 ($json) of type string is deprec...
  • warninglog[09:32:21] LOG.warning: json_decode(): Passing null to parameter #1 ($json) of type string is deprec...
  • warninglog[09:32:21] LOG.warning: json_decode(): Passing null to parameter #1 ($json) of type string is deprec...
  • warninglog[09:32:21] LOG.warning: json_decode(): Passing null to parameter #1 ($json) of type string is deprec...
  • warninglog[09:32:21] LOG.warning: json_decode(): Passing null to parameter #1 ($json) of type string is deprec...
  • warninglog[09:32:21] LOG.warning: json_decode(): Passing null to parameter #1 ($json) of type string is deprec...
  • warninglog[09:32:21] LOG.warning: mt_rand(): Passing null to parameter #2 ($max) of type int is deprecated in ...
  • Booting (23ms)
  • Application (684ms)
  • 1 x Application (96.69%)
    683.62ms
    1 x Booting (3.25%)
    23.00ms
    7 templates were rendered
    • themes.DevBlog.content.post (resources/views/themes/DevBlog/content/post.blade.php)34blade
      Params
      0
      post
      1
      postContent
      2
      author
      3
      updated_at
      4
      bing_rich_snippet_text
      5
      bing_rich_snippet_link
      6
      bing_related_keywords
      7
      google_related_keywords
      8
      bing_news_title
      9
      bing_news_description
      10
      bing_videos
      11
      bing_images
      12
      bing_search_result_title
      13
      bing_search_result_description
      14
      bing_search_result_url
      15
      bing_paa_questions
      16
      bing_paa_answers
      17
      bing_slider_faq_questions
      18
      bing_slider_faq_answers
      19
      bing_pop_faq_questions
      20
      bing_pop_faq_answers
      21
      bing_tab_faq_questions
      22
      bing_tab_faq_answers
      23
      google_faq_questions
      24
      google_faq_answers
      25
      google_rich_snippet
      26
      google_search_result
      27
      indexedArray
      28
      total_images
      29
      total_videos
      30
      settings
      31
      url_current
      32
      menus
      33
      sidebar
    • themes.DevBlog.layouts.master (resources/views/themes/DevBlog/layouts/master.blade.php)41blade
      Params
      0
      __env
      1
      app
      2
      errors
      3
      post
      4
      postContent
      5
      author
      6
      updated_at
      7
      bing_rich_snippet_text
      8
      bing_rich_snippet_link
      9
      bing_related_keywords
      10
      google_related_keywords
      11
      bing_news_title
      12
      bing_news_description
      13
      bing_videos
      14
      bing_images
      15
      bing_search_result_title
      16
      bing_search_result_description
      17
      bing_search_result_url
      18
      bing_paa_questions
      19
      bing_paa_answers
      20
      bing_slider_faq_questions
      21
      bing_slider_faq_answers
      22
      bing_pop_faq_questions
      23
      bing_pop_faq_answers
      24
      bing_tab_faq_questions
      25
      bing_tab_faq_answers
      26
      google_faq_questions
      27
      google_faq_answers
      28
      google_rich_snippet
      29
      google_search_result
      30
      indexedArray
      31
      total_images
      32
      total_videos
      33
      settings
      34
      url_current
      35
      menus
      36
      sidebar
      37
      i
      38
      __currentLoopData
      39
      loop
      40
      item
    • themes.DevBlog.panels.head (resources/views/themes/DevBlog/panels/head.blade.php)41blade
      Params
      0
      __env
      1
      app
      2
      errors
      3
      post
      4
      postContent
      5
      author
      6
      updated_at
      7
      bing_rich_snippet_text
      8
      bing_rich_snippet_link
      9
      bing_related_keywords
      10
      google_related_keywords
      11
      bing_news_title
      12
      bing_news_description
      13
      bing_videos
      14
      bing_images
      15
      bing_search_result_title
      16
      bing_search_result_description
      17
      bing_search_result_url
      18
      bing_paa_questions
      19
      bing_paa_answers
      20
      bing_slider_faq_questions
      21
      bing_slider_faq_answers
      22
      bing_pop_faq_questions
      23
      bing_pop_faq_answers
      24
      bing_tab_faq_questions
      25
      bing_tab_faq_answers
      26
      google_faq_questions
      27
      google_faq_answers
      28
      google_rich_snippet
      29
      google_search_result
      30
      indexedArray
      31
      total_images
      32
      total_videos
      33
      settings
      34
      url_current
      35
      menus
      36
      sidebar
      37
      i
      38
      __currentLoopData
      39
      loop
      40
      item
    • themes.DevBlog.panels.header (resources/views/themes/DevBlog/panels/header.blade.php)41blade
      Params
      0
      __env
      1
      app
      2
      errors
      3
      post
      4
      postContent
      5
      author
      6
      updated_at
      7
      bing_rich_snippet_text
      8
      bing_rich_snippet_link
      9
      bing_related_keywords
      10
      google_related_keywords
      11
      bing_news_title
      12
      bing_news_description
      13
      bing_videos
      14
      bing_images
      15
      bing_search_result_title
      16
      bing_search_result_description
      17
      bing_search_result_url
      18
      bing_paa_questions
      19
      bing_paa_answers
      20
      bing_slider_faq_questions
      21
      bing_slider_faq_answers
      22
      bing_pop_faq_questions
      23
      bing_pop_faq_answers
      24
      bing_tab_faq_questions
      25
      bing_tab_faq_answers
      26
      google_faq_questions
      27
      google_faq_answers
      28
      google_rich_snippet
      29
      google_search_result
      30
      indexedArray
      31
      total_images
      32
      total_videos
      33
      settings
      34
      url_current
      35
      menus
      36
      sidebar
      37
      i
      38
      __currentLoopData
      39
      loop
      40
      item
    • themes.DevBlog.panels.navbar (resources/views/themes/DevBlog/panels/navbar.blade.php)41blade
      Params
      0
      __env
      1
      app
      2
      errors
      3
      post
      4
      postContent
      5
      author
      6
      updated_at
      7
      bing_rich_snippet_text
      8
      bing_rich_snippet_link
      9
      bing_related_keywords
      10
      google_related_keywords
      11
      bing_news_title
      12
      bing_news_description
      13
      bing_videos
      14
      bing_images
      15
      bing_search_result_title
      16
      bing_search_result_description
      17
      bing_search_result_url
      18
      bing_paa_questions
      19
      bing_paa_answers
      20
      bing_slider_faq_questions
      21
      bing_slider_faq_answers
      22
      bing_pop_faq_questions
      23
      bing_pop_faq_answers
      24
      bing_tab_faq_questions
      25
      bing_tab_faq_answers
      26
      google_faq_questions
      27
      google_faq_answers
      28
      google_rich_snippet
      29
      google_search_result
      30
      indexedArray
      31
      total_images
      32
      total_videos
      33
      settings
      34
      url_current
      35
      menus
      36
      sidebar
      37
      i
      38
      __currentLoopData
      39
      loop
      40
      item
    • themes.DevBlog.panels.footer (resources/views/themes/DevBlog/panels/footer.blade.php)41blade
      Params
      0
      __env
      1
      app
      2
      errors
      3
      post
      4
      postContent
      5
      author
      6
      updated_at
      7
      bing_rich_snippet_text
      8
      bing_rich_snippet_link
      9
      bing_related_keywords
      10
      google_related_keywords
      11
      bing_news_title
      12
      bing_news_description
      13
      bing_videos
      14
      bing_images
      15
      bing_search_result_title
      16
      bing_search_result_description
      17
      bing_search_result_url
      18
      bing_paa_questions
      19
      bing_paa_answers
      20
      bing_slider_faq_questions
      21
      bing_slider_faq_answers
      22
      bing_pop_faq_questions
      23
      bing_pop_faq_answers
      24
      bing_tab_faq_questions
      25
      bing_tab_faq_answers
      26
      google_faq_questions
      27
      google_faq_answers
      28
      google_rich_snippet
      29
      google_search_result
      30
      indexedArray
      31
      total_images
      32
      total_videos
      33
      settings
      34
      url_current
      35
      menus
      36
      sidebar
      37
      i
      38
      __currentLoopData
      39
      loop
      40
      item
    • themes.DevBlog.panels.scripts (resources/views/themes/DevBlog/panels/scripts.blade.php)41blade
      Params
      0
      __env
      1
      app
      2
      errors
      3
      post
      4
      postContent
      5
      author
      6
      updated_at
      7
      bing_rich_snippet_text
      8
      bing_rich_snippet_link
      9
      bing_related_keywords
      10
      google_related_keywords
      11
      bing_news_title
      12
      bing_news_description
      13
      bing_videos
      14
      bing_images
      15
      bing_search_result_title
      16
      bing_search_result_description
      17
      bing_search_result_url
      18
      bing_paa_questions
      19
      bing_paa_answers
      20
      bing_slider_faq_questions
      21
      bing_slider_faq_answers
      22
      bing_pop_faq_questions
      23
      bing_pop_faq_answers
      24
      bing_tab_faq_questions
      25
      bing_tab_faq_answers
      26
      google_faq_questions
      27
      google_faq_answers
      28
      google_rich_snippet
      29
      google_search_result
      30
      indexedArray
      31
      total_images
      32
      total_videos
      33
      settings
      34
      url_current
      35
      menus
      36
      sidebar
      37
      i
      38
      __currentLoopData
      39
      loop
      40
      item
    uri
    GET {post}
    middleware
    web, checkdate
    as
    post.show
    controller
    App\Http\Controllers\Frontend\json_data\PostController@show
    namespace
    where
    file
    app/Http/Controllers/Frontend/json_data/PostController.php:18-166
    7 statements were executed661ms
    • select * from `posts` where `published_at` <= '2025-04-23 09:32:21' and `slug` = 'ge-ice-maker-replacement-kit' and `posts`.`deleted_at` is null limit 1
      5.29ms/app/Providers/RouteServiceProvider.php:54receivinghelpdeskask
      Metadata
      Bindings
      • 0. 2025-04-23 09:32:21
      • 1. ge-ice-maker-replacement-kit
      Backtrace
      • 15. /app/Providers/RouteServiceProvider.php:54
      • 18. /vendor/laravel/framework/src/Illuminate/Routing/Router.php:842
      • 19. Route binding:39
      • 20. /vendor/laravel/framework/src/Illuminate/Pipeline/Pipeline.php:167
      • 21. /vendor/laravel/framework/src/Illuminate/Foundation/Http/Middleware/VerifyCsrfToken.php:78
    • select * from `json_post_contents` where `json_post_contents`.`post_id` = 92888 and `json_post_contents`.`post_id` is not null and `rewrite_id` = 0
      3.95msmiddleware::checkdate:30receivinghelpdeskask
      Metadata
      Bindings
      • 0. 92888
      • 1. 0
      Backtrace
      • 19. middleware::checkdate:30
      • 20. /vendor/laravel/framework/src/Illuminate/Pipeline/Pipeline.php:167
      • 21. /vendor/laravel/jetstream/src/Http/Middleware/ShareInertiaData.php:61
      • 22. /vendor/laravel/framework/src/Illuminate/Pipeline/Pipeline.php:167
      • 23. /vendor/laravel/framework/src/Illuminate/Routing/Middleware/SubstituteBindings.php:50
    • select * from `nova_menu_menus` where `slug` = 'header' limit 1
      490μs/vendor/outl1ne/nova-menu-builder/src/helpers.php:32receivinghelpdeskask
      Metadata
      Bindings
      • 0. header
      Backtrace
      • 15. /vendor/outl1ne/nova-menu-builder/src/helpers.php:32
      • 17. /vendor/laravel/framework/src/Illuminate/Routing/Controller.php:54
      • 18. /vendor/laravel/framework/src/Illuminate/Routing/ControllerDispatcher.php:45
      • 19. /vendor/laravel/framework/src/Illuminate/Routing/Route.php:261
      • 20. /vendor/laravel/framework/src/Illuminate/Routing/Route.php:205
    • select * from `nova_menu_menu_items` where `nova_menu_menu_items`.`menu_id` = 1 and `nova_menu_menu_items`.`menu_id` is not null and `parent_id` is null order by `parent_id` asc, `order` asc, `name` asc
      620μs/vendor/outl1ne/nova-menu-builder/src/Models/Menu.php:35receivinghelpdeskask
      Metadata
      Bindings
      • 0. 1
      Backtrace
      • 19. /vendor/outl1ne/nova-menu-builder/src/Models/Menu.php:35
      • 20. /vendor/outl1ne/nova-menu-builder/src/helpers.php:33
      • 22. /vendor/laravel/framework/src/Illuminate/Routing/Controller.php:54
      • 23. /vendor/laravel/framework/src/Illuminate/Routing/ControllerDispatcher.php:45
      • 24. /vendor/laravel/framework/src/Illuminate/Routing/Route.php:261
    • select * from `nova_menu_menu_items` where `nova_menu_menu_items`.`parent_id` in (1) order by `order` asc
      1.95ms/vendor/outl1ne/nova-menu-builder/src/Models/Menu.php:35receivinghelpdeskask
      Metadata
      Backtrace
      • 24. /vendor/outl1ne/nova-menu-builder/src/Models/Menu.php:35
      • 25. /vendor/outl1ne/nova-menu-builder/src/helpers.php:33
      • 27. /vendor/laravel/framework/src/Illuminate/Routing/Controller.php:54
      • 28. /vendor/laravel/framework/src/Illuminate/Routing/ControllerDispatcher.php:45
      • 29. /vendor/laravel/framework/src/Illuminate/Routing/Route.php:261
    • select `id`, `post_title`, `slug` from `posts` where `status` = 'publish' and `posts`.`deleted_at` is null order by RAND() limit 10
      643ms/app/View/Composers/SidebarView.php:22receivinghelpdeskask
      Metadata
      Bindings
      • 0. publish
      Backtrace
      • 14. /app/View/Composers/SidebarView.php:22
      • 15. /app/View/Composers/SidebarView.php:12
      • 16. /vendor/laravel/framework/src/Illuminate/View/Concerns/ManagesEvents.php:124
      • 17. /vendor/laravel/framework/src/Illuminate/View/Concerns/ManagesEvents.php:162
      • 20. /vendor/laravel/framework/src/Illuminate/View/Concerns/ManagesEvents.php:177
    • select * from `fake_users` where `fake_users`.`id` = 18971 limit 1
      4.83msview::2dd102cf0462e89a4d4d8bc77355d767652bf9aa:15receivinghelpdeskask
      Metadata
      Bindings
      • 0. 18971
      Backtrace
      • 21. view::2dd102cf0462e89a4d4d8bc77355d767652bf9aa:15
      • 23. /vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:108
      • 24. /vendor/laravel/framework/src/Illuminate/View/Engines/PhpEngine.php:58
      • 25. /vendor/livewire/livewire/src/ComponentConcerns/RendersLivewireComponents.php:69
      • 26. /vendor/laravel/framework/src/Illuminate/View/Engines/CompilerEngine.php:61
    App\Models\FakeUser
    1
    Outl1ne\MenuBuilder\Models\MenuItem
    1
    Outl1ne\MenuBuilder\Models\Menu
    1
    App\Models\JsonPostContent
    1
    App\Models\Post
    11
        _token
        RhI3d4aETOEDF9j72ngF0YM6L8g9ZK1VSS3XFMHV
        _previous
        array:1 [ "url" => "https://receivinghelpdesk.com/ask/ge-ice-maker-replacement-kit" ]
        _flash
        array:2 [ "old" => [] "new" => [] ]
        PHPDEBUGBAR_STACK_DATA
        []
        path_info
        /ge-ice-maker-replacement-kit
        status_code
        200
        
        status_text
        OK
        format
        html
        content_type
        text/html; charset=UTF-8
        request_query
        []
        
        request_request
        []
        
        request_headers
        0 of 0
        array:24 [ "cf-ipcountry" => array:1 [ 0 => "US" ] "cf-connecting-ip" => array:1 [ 0 => "3.135.200.168" ] "cdn-loop" => array:1 [ 0 => "cloudflare; loops=1" ] "cf-visitor" => array:1 [ 0 => "{"scheme":"https"}" ] "sec-fetch-site" => array:1 [ 0 => "none" ] "accept" => array:1 [ 0 => "text/html,application/xhtml+xml,application/xml;q=0.9,image/avif,image/webp,image/apng,*/*;q=0.8,application/signed-exchange;v=b3;q=0.7" ] "user-agent" => array:1 [ 0 => "Mozilla/5.0 AppleWebKit/537.36 (KHTML, like Gecko; compatible; ClaudeBot/1.0; +claudebot@anthropic.com)" ] "upgrade-insecure-requests" => array:1 [ 0 => "1" ] "sec-ch-ua-platform" => array:1 [ 0 => ""Windows"" ] "sec-ch-ua-mobile" => array:1 [ 0 => "?0" ] "sec-ch-ua" => array:1 [ 0 => ""HeadlessChrome";v="129", "Not=A?Brand";v="8", "Chromium";v="129"" ] "cache-control" => array:1 [ 0 => "no-cache" ] "pragma" => array:1 [ 0 => "no-cache" ] "sec-fetch-dest" => array:1 [ 0 => "document" ] "cf-ray" => array:1 [ 0 => "934a76ff3b2110ff-ORD" ] "accept-encoding" => array:1 [ 0 => "gzip, br" ] "priority" => array:1 [ 0 => "u=0, i" ] "sec-fetch-user" => array:1 [ 0 => "?1" ] "sec-fetch-mode" => array:1 [ 0 => "navigate" ] "connection" => array:1 [ 0 => "close" ] "x-forwarded-proto" => array:1 [ 0 => "https" ] "x-forwarded-for" => array:1 [ 0 => "3.135.200.168, 172.69.59.178" ] "x-server-addr" => array:1 [ 0 => "154.12.239.204" ] "host" => array:1 [ 0 => "receivinghelpdesk.com" ] ]
        request_server
        0 of 0
        array:55 [ "USER" => "runcloud" "HOME" => "/home/runcloud" "SCRIPT_NAME" => "/ask/index.php" "REQUEST_URI" => "/ask/ge-ice-maker-replacement-kit" "QUERY_STRING" => "" "REQUEST_METHOD" => "GET" "SERVER_PROTOCOL" => "HTTP/1.0" "GATEWAY_INTERFACE" => "CGI/1.1" "REDIRECT_URL" => "/ask/ge-ice-maker-replacement-kit" "REMOTE_PORT" => "47008" "SCRIPT_FILENAME" => "/home/runcloud/webapps/ReceivingHelpDesk/ask/index.php" "SERVER_ADMIN" => "you@example.com" "CONTEXT_DOCUMENT_ROOT" => "/home/runcloud/webapps/ReceivingHelpDesk/" "CONTEXT_PREFIX" => "" "REQUEST_SCHEME" => "http" "DOCUMENT_ROOT" => "/home/runcloud/webapps/ReceivingHelpDesk/" "REMOTE_ADDR" => "172.69.59.178" "SERVER_PORT" => "80" "SERVER_ADDR" => "127.0.0.1" "SERVER_NAME" => "receivinghelpdesk.com" "SERVER_SOFTWARE" => "Apache/2.4.63 (Unix) OpenSSL/1.1.1f" "SERVER_SIGNATURE" => "" "LD_LIBRARY_PATH" => "/RunCloud/Packages/apache2-rc/lib" "PATH" => "/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin" "HTTP_CF_IPCOUNTRY" => "US" "HTTP_CF_CONNECTING_IP" => "3.135.200.168" "HTTP_CDN_LOOP" => "cloudflare; loops=1" "HTTP_CF_VISITOR" => "{"scheme":"https"}" "HTTP_SEC_FETCH_SITE" => "none" "HTTP_ACCEPT" => "text/html,application/xhtml+xml,application/xml;q=0.9,image/avif,image/webp,image/apng,*/*;q=0.8,application/signed-exchange;v=b3;q=0.7" "HTTP_USER_AGENT" => "Mozilla/5.0 AppleWebKit/537.36 (KHTML, like Gecko; compatible; ClaudeBot/1.0; +claudebot@anthropic.com)" "HTTP_UPGRADE_INSECURE_REQUESTS" => "1" "HTTP_SEC_CH_UA_PLATFORM" => ""Windows"" "HTTP_SEC_CH_UA_MOBILE" => "?0" "HTTP_SEC_CH_UA" => ""HeadlessChrome";v="129", "Not=A?Brand";v="8", "Chromium";v="129"" "HTTP_CACHE_CONTROL" => "no-cache" "HTTP_PRAGMA" => "no-cache" "HTTP_SEC_FETCH_DEST" => "document" "HTTP_CF_RAY" => "934a76ff3b2110ff-ORD" "HTTP_ACCEPT_ENCODING" => "gzip, br" "HTTP_PRIORITY" => "u=0, i" "HTTP_SEC_FETCH_USER" => "?1" "HTTP_SEC_FETCH_MODE" => "navigate" "HTTP_CONNECTION" => "close" "HTTP_X_FORWARDED_PROTO" => "https" "HTTP_X_FORWARDED_FOR" => "3.135.200.168, 172.69.59.178" "HTTP_X_SERVER_ADDR" => "154.12.239.204" "HTTP_HOST" => "receivinghelpdesk.com" "HTTPS" => "on" "REDIRECT_STATUS" => "200" "REDIRECT_HTTPS" => "on" "FCGI_ROLE" => "RESPONDER" "PHP_SELF" => "/ask/index.php" "REQUEST_TIME_FLOAT" => 1745380941.8107 "REQUEST_TIME" => 1745380941 ]
        request_cookies
        []
        
        response_headers
        0 of 0
        array:7 [ "content-type" => array:1 [ 0 => "text/html; charset=UTF-8" ] "cache-control" => array:1 [ 0 => "private, must-revalidate" ] "date" => array:1 [ 0 => "Wed, 23 Apr 2025 04:02:21 GMT" ] "pragma" => array:1 [ 0 => "no-cache" ] "expires" => array:1 [ 0 => -1 ] "set-cookie" => array:2 [ 0 => "XSRF-TOKEN=eyJpdiI6IlJJZVJDeklRUS9UNWRULzQrN2FQdHc9PSIsInZhbHVlIjoiOVBIcVVpVnlBOHFDV0dOYklBV3NNZGdjTmdVakwwb0xiSk1vUkowc1lYbHBDQzk5TGxKWU9KdXJvK3d4WTJFS0s1alNnenEwemRtSk52S2I4NDBjVWc2OUZlK2dkYnZ3YVh6M09JOGR4cGkrcHpXU21EMk9mZWJxOWt1V2NQTU8iLCJtYWMiOiJkNTI5YmM3NzA2ZWIwMzk2NjFkYmM2OWU0NDMxMmRiYTMyODM4NzE1M2RiYTM0MTgzZTExYmRlN2M3OTEyODdjIiwidGFnIjoiIn0%3D; expires=Wed, 23-Apr-2025 06:02:22 GMT; Max-Age=7200; path=/; samesite=laxXSRF-TOKEN=eyJpdiI6IlJJZVJDeklRUS9UNWRULzQrN2FQdHc9PSIsInZhbHVlIjoiOVBIcVVpVnlBOHFDV0dOYklBV3NNZGdjTmdVakwwb0xiSk1vUkowc1lYbHBDQzk5TGxKWU9KdXJvK3d4WTJFS0s1alNne" 1 => "askhelpdesk_session=eyJpdiI6ImdMZjZUaURXUFNWUkpZMERjZkoxcXc9PSIsInZhbHVlIjoid2lGdEZkYi94c1BLbFZPMEwrYytCSjlkQkRlNGNOZm5haHVQVDBlS1hUUU5KSzVjZ09mN1Q4enN1VlgwUmdqM04vdkNqQTRCUGlmMzBWWndaSWNjS09xOFUvTVpRa0l5V3VHeE9RWnNOcTdKNUhGZFFLRHpWMi82YzNUSmtnOXYiLCJtYWMiOiIwY2ZmZDQzYjAyMTNjYzkzNzU5NGYzOWQwMjIxZGIzM2RhMTAxNjc4NTQzYTZlZjI0ZmFlYzM2ZjE0NWYyOTY5IiwidGFnIjoiIn0%3D; expires=Wed, 23-Apr-2025 06:02:22 GMT; Max-Age=7200; path=/; httponly; samesite=laxaskhelpdesk_session=eyJpdiI6ImdMZjZUaURXUFNWUkpZMERjZkoxcXc9PSIsInZhbHVlIjoid2lGdEZkYi94c1BLbFZPMEwrYytCSjlkQkRlNGNOZm5haHVQVDBlS1hUUU5KSzVjZ09mN1Q4enN1VlgwUmdq" ] "Set-Cookie" => array:2 [ 0 => "XSRF-TOKEN=eyJpdiI6IlJJZVJDeklRUS9UNWRULzQrN2FQdHc9PSIsInZhbHVlIjoiOVBIcVVpVnlBOHFDV0dOYklBV3NNZGdjTmdVakwwb0xiSk1vUkowc1lYbHBDQzk5TGxKWU9KdXJvK3d4WTJFS0s1alNnenEwemRtSk52S2I4NDBjVWc2OUZlK2dkYnZ3YVh6M09JOGR4cGkrcHpXU21EMk9mZWJxOWt1V2NQTU8iLCJtYWMiOiJkNTI5YmM3NzA2ZWIwMzk2NjFkYmM2OWU0NDMxMmRiYTMyODM4NzE1M2RiYTM0MTgzZTExYmRlN2M3OTEyODdjIiwidGFnIjoiIn0%3D; expires=Wed, 23-Apr-2025 06:02:22 GMT; path=/XSRF-TOKEN=eyJpdiI6IlJJZVJDeklRUS9UNWRULzQrN2FQdHc9PSIsInZhbHVlIjoiOVBIcVVpVnlBOHFDV0dOYklBV3NNZGdjTmdVakwwb0xiSk1vUkowc1lYbHBDQzk5TGxKWU9KdXJvK3d4WTJFS0s1alNne" 1 => "askhelpdesk_session=eyJpdiI6ImdMZjZUaURXUFNWUkpZMERjZkoxcXc9PSIsInZhbHVlIjoid2lGdEZkYi94c1BLbFZPMEwrYytCSjlkQkRlNGNOZm5haHVQVDBlS1hUUU5KSzVjZ09mN1Q4enN1VlgwUmdqM04vdkNqQTRCUGlmMzBWWndaSWNjS09xOFUvTVpRa0l5V3VHeE9RWnNOcTdKNUhGZFFLRHpWMi82YzNUSmtnOXYiLCJtYWMiOiIwY2ZmZDQzYjAyMTNjYzkzNzU5NGYzOWQwMjIxZGIzM2RhMTAxNjc4NTQzYTZlZjI0ZmFlYzM2ZjE0NWYyOTY5IiwidGFnIjoiIn0%3D; expires=Wed, 23-Apr-2025 06:02:22 GMT; path=/; httponlyaskhelpdesk_session=eyJpdiI6ImdMZjZUaURXUFNWUkpZMERjZkoxcXc9PSIsInZhbHVlIjoid2lGdEZkYi94c1BLbFZPMEwrYytCSjlkQkRlNGNOZm5haHVQVDBlS1hUUU5KSzVjZ09mN1Q4enN1VlgwUmdq" ] ]
        session_attributes
        0 of 0
        array:4 [ "_token" => "RhI3d4aETOEDF9j72ngF0YM6L8g9ZK1VSS3XFMHV" "_previous" => array:1 [ "url" => "https://receivinghelpdesk.com/ask/ge-ice-maker-replacement-kit" ] "_flash" => array:2 [ "old" => [] "new" => [] ] "PHPDEBUGBAR_STACK_DATA" => [] ]