Receiving Helpdesk

ge ice maker diagnostic test

by Esperanza Moore Published 4 years ago Updated 3 years ago

How do I test my GE ice maker? Electronic Icemaker Power ON Diagnostics Test Mode Turn on the motor until it reaches home position. Turn on the water valve for 1/2 second. Turn on the heater for 1/2 second. Verify that the feeler arm was in the 'in' and then the 'out' position. Click to see full answer.

Part of a video titled How to Troubleshoot Icemaker Issues - YouTube
1:23
2:11
Test turn the icemaker off wait 15 seconds then turn it back on press the paddle three times.MoreTest turn the icemaker off wait 15 seconds then turn it back on press the paddle three times.

Full Answer

How do I diagnose an ice maker problem?

A useful and handy diagnostic technique when working on an ice maker problem is to manually initiate a harvest cycle to see with the ice maker will or will not do. Here's how to manually cycle the GE WR30X10093 ice maker: When the icemaker is first connected to power and if thermistor temperature is 50°F (10°C) or higher,

Why isn’t my GE Profile icemaker working?

You can generally depend on a GE Profile icemaker to work without a problem, unfortunately, that isn’t always the case. They can stop working for several reasons ranging from a faulty door switch to a clogged or dirty filter. Whether it be electrical or mechanical problems, let’s take a look at why your GE Profile icemaker isn’t working.

What is the service diagnostic mode of the ice maker?

The service diagnostic mode consists of a harvest cycle followed by a water fill. The harvest cycle is entered immediately, regardless of icemaker temperature or arm position. While in the harvest cycle in the service mode, the heater will remain on for a minimum of 20 seconds.

How do I perform a power on test on my icemaker?

When the icemaker is first connected to power and if thermistor temperature is 50°F (10°C) or higher, the control will perform a Power On test before entering the freeze cycle. • Turn on the motor until it reaches home the next time. • Turn on the water valve for 1/2 second. • Tum on the heater for 1/2 second.

How do I reset my GE refrigerator ice maker?

Tips for Resetting a GE Ice MakerAdjust the feeler arm. If water doesn't immediately start filling in the reservoir, go to step 2.Press the on/off button.Keep the ice maker unplugged for 15 minutes.Turn the ice maker back on.

Where is the reset button on GE ice maker?

GE Ice Maker Isn't Working This arm, also called a feeler, is what tells the unit to stop producing ice when it comes into contact with ice cubes. Restore power to the ice maker. Next, push up on the arm or feeler three times. This will reset the unit.

How do you manually cycle an ice maker?

1:443:59Ice Maker - Cycle Test - YouTubeYouTubeStart of suggested clipEnd of suggested clipGo see the little notch at the bottom that's going to rotate 360 degrees all the way around. And itMoreGo see the little notch at the bottom that's going to rotate 360 degrees all the way around. And it will run through the various stages.

How do you diagnose an ice maker?

3:585:02Ice Maker Not Working? - Check these 6 Things first! - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd and turns off the light. So if this is not turning the lights on when you open the refrigerator.MoreAnd and turns off the light. So if this is not turning the lights on when you open the refrigerator. Or the freezer. Then your ice maker may not be working just due to a faulty door switch the sixth.

Why did my GE ice maker stop working?

The icemaker may have stopped working. A common problem with an icemaker going bad is a clogged water line, which causes a build up of ice. The GE icemaker has a filter that may need to be cleaned or replaced, a door switch that may be malfunctioning, or the temperature may not be set correctly.

Why is my GE icemaker not making ice?

The icemaker must reach a temperature of 16 degrees F before a cycle will begin. If the temperature in the freezer is too warm, ice cubes will take longer to form or may not form at all. Try adjusting the freezer temperature a little lower. A low food load in the freezer can affect the production of ice.

How do you jumpstart an ice maker?

3:484:44IceMaker Not Working - YouTubeYouTubeStart of suggested clipEnd of suggested clipAfter you jumpstart the water you want to make sure that this cycles through so you'll just startMoreAfter you jumpstart the water you want to make sure that this cycles through so you'll just start the icemaker. Itself. This is start to turn once you see attorney.

How do you jump a ice maker solenoid?

On GE icemakers made after the year 2000, you jump the icemaker by turning it off for more than 30 seconds. Now turn the icemakers back on and push the feeler arm in three times within 15 seconds after turning it on. Be sure to only push it three times because if you push it more it won't run water in.

Why is my ice maker not making ice but water works?

If your ice maker isn't producing ice at all or is producing crescents or cubes that are smaller than usual, it's typically indicative of a clog somewhere along the supply line. Cause: A common cause for a clog is frozen water in the line. Fix: To repair a frozen line, slide the refrigerator and unplug it.

What are the three most common failures of the model 50 ice machine?

What Are The Most Common Causes of Ice Maker Failure?Your Freezer is Too Warm. ... Ice Mold Failure. ... The Water Inlet Valve is Faulty. ... Ice Maker Module Malfunction. ... Ice Make Assembly Failure.

How do I know if my ice maker is bad?

If the ice maker makes cubes and kicks them into the bucket – the water inlet valve is bad. If there are no new cubes in the bucket – the ice maker is bad.

How do you test an ice maker with a multimeter?

0:092:49Testing ice maker voltage - How to measure voltage - YouTubeYouTubeStart of suggested clipEnd of suggested clipThe black line always goes in calm it says column right down there I don't know if you can read thatMoreThe black line always goes in calm it says column right down there I don't know if you can read that and then your red line goes all the way over here. I'm setting mine on voltage.

Where is the ice maker switch on a GE refrigerator?

For these refrigerator models, you turn the icemaker ON and OFF using the control panel on the fridge. ON/OFF Toggle Switch: This icemaker design has an ON/OFF switch similar to a light or power switch. ON is at the top of the toggle switch while OFF is at the bottom of the toggle switch.

Why won't my GE refrigerator dispense water or ice?

If you discover your GE refrigerator not dispensing water or ice, the dispenser switch may have failed. No voltage, no working dispenser. A multimeter can be used to check for continuity to determine if the dispenser switch is working properly. If there is no continuity, then the switch needs to be replaced.

How do I make my GE refrigerator ice maker work?

0:163:05Icemaker Troubleshooting - French Door Refrigerators - YouTubeYouTubeStart of suggested clipEnd of suggested clipHowever. If you have a cafe model you must first select settings. On the touch screen then navigateMoreHowever. If you have a cafe model you must first select settings. On the touch screen then navigate to the second page menu. And select icemaker to turn the unit on or off. Next.

What temperature should an ice maker be?

If your icemaker is not producing any ice: The icemaker must reach 16 degrees F before a cycle will begin. If the temperature in the freezer is too warm, ice cubes will take longer to form or may not form at all. Try adjusting the freezer temperature.

How to reset a ice maker?

Push the feeler arm up three times quickly to reset the ice maker .

How long does it take for an icemaker to work?

If just installed, the icemaker itself could take 24 hours to get cold enough to produce ice. The icemaker must reach 15 degrees F before a cycle will begin.

How to enter self diagnostic mode on GE side by side refrigerator?

This is for the GE refrigerators that have the muthaboard in back and at least 5 pads on the touch control panel. To enter Self Diagnostic mode, both temperature control panel displays must be illuminated.

How to enter test code on refrigerator?

Use the refrigerator temperature adjustment buttons to enter the test code number in the refrigerator display.

What does 0 mean on a refrigerator?

A flashing 0 in the refrigerator and freezer displays will indicate that the refrigerator is in Self Diagnostic mode.

How long does it take for Test Mode to end?

Test mode will terminate automatically after 15 minutes of inactivity.

What happens if GE profile ice maker is defective?

The GE Profile ice maker has a water inlet valve, that is electronically controlled. If the valve is defective, it will not open up to let the water in. You will need to use your multimeter, to check the inlet valve for continuity. If it is defective, you will need to replace it.

How to reset a GE profile ice maker?

Step 1: You will need to pull your GE refrigerator out from the wall and locate the power cord. Pull the power cord out from the outlet, and wait around 60 seconds.

Why is my GE refrigerator not getting water?

Not getting water can be from more than one issue. You could have a clogged water line, that is clogged with debris, or you could have a frozen water line. Both of these could keep the ice maker from making ice. You will need to inspect the waterline.

How to check if your refrigerator water line is clogged?

You may have a water line clogged with debris. To check this, you will need to turn the water supply to the refrigerator off. You can remove the waterline, and blow through it. If something is restricting the air, then you will need to clean it. Vinegar can work great for getting thick debris out. Also, use warm water to flush it.

Why won't my refrigerator inlet valve work?

An inlet valve may not work correctly if there is not enough water pressure. First, check your water pressure, to make sure there are no issues, before testing the inlet valve. Always make sure that the refrigerator is unplugged when replacing parts, or testing parts for continuity.

How to tell if water line is frozen?

You should feel the waterline with your hands, and try to determine if the line has frozen. It will feel frozen when you touch it. If you identify that it has been frozen, then you will need to defrost your refrigerator.

What happens if the door switch on a GE refrigerator goes bad?

If this switch goes bad, then it will cause the ice maker to stop working. You will need to use your multimeter, to test whether or not the door switch is working.

What is the inlet valve on a GE ice maker?

The inlet valve is controlled electrically. It gets the power to open and allow water to flow into the ice maker mold. Now if a GE ice maker doesn’t work, look at the valve.

What temperature does an ice maker eject?

A soon as the mold gets to a preset temperature, usually 15 degrees Fahrenheit, the ejector blades eject the ice and a new cycle begins.

Why does my ice maker pull up under the ice maker?

If the ice maker has a feeler arm, it goes up to turn the ice maker off once ice fills the mold or bucket. And if it is a paddle, it pulls in under the ice maker for the same reason.

What happens if the thermostat is defective?

But if the thermostat becomes defective, the ice maker will not make ice. In fact, it will stop working.

Why is my refrigerator so cold?

Dirty condenser coils are also another factor to consider. If a significant amount of dirt builds on them, the refrigerator will have a hard time keeping the temperature cold.

How to check the pressure of a water valve?

Take a multimeter and test the solenoid of the inlet valve. Check it for power. Also, check the pressure of the water coming to the valve.

What is the job of the thermostat in an ice maker?

Once water fills the mold, the freezing begins. There is a thermostat in the ice maker. Its job is to keep an eye on the water temperature.

What to do if ice maker switch is defective?

If the ice maker switch seems defective, test it for continuity with a multimeter to determine if it needs to be replaced.

Why does my GE refrigerator stop making ice?

Some GE refrigerators have an ice level control board that operates an infrared beam that signals the ice maker to stop making ice when the ice bucket reaches a certain level. If there is a fault with the ice level control board, the ice maker will stop making ice. If the ice level control board is defective, it should be replaced to fix the issue.

What to do if ice tray thermostat is bad?

If there is a fault with the ice tray thermostat, the ice maker will not know when water is required or when ice should be emptied from the ice tray. If you suspect the ice tray thermostat, test it with a multimeter for continuity. If defective, the thermostat will need to be replaced.

How to reset a refrigerator ice maker?

Often the ice maker will have a reset button or a way to reset it through the digital display panel. Other models may have a “test” button or a place to insert a pin to reset the ice maker. Turning the power to the refrigerator off for five minutes can also reset the ice maker. Check the refrigerator’s manual for ice maker reset instructions.

Why does my ice maker hum?

The water inlet valve can become defective if the valve becomes blocked with mineral deposits, which stop the valve from opening. An unusual hum coming from the refrigerator when the ice maker should be filling up with water indicates a blocked valve. If the valve is blocked, it is recommended that the valve be replaced.

Why does my ice maker need to be down?

As mentioned above, if your ice maker has a mechanical arm, it needs to be down for the ice maker to work. The arm can also fail if the arm’s spring has broken. Check the arm for signs that the spring has broken, and replace the arm if it is found to be defective.

What happens if you crack an ice tray?

If your model features a rotating ice tray, a crack in the ice tray can stop the tray from rotating and emptying the ice. If cracked, it should be replaced.

What to do if your ice maker won't do manual harvest?

If the ice maker won't do the manual harvest, replace it. Here's the replacement you need: http://www.repairclinic.com/PartDetail/Ice-Maker-Assembly/WR30X10093/1399596

When will a control perform a power on test?

the control will perform a Power On test before entering the freeze cycle.

What temperature does a refrigerator freeze?

but may cause a small cube when the refrigerator is first started. If the temperature is below 50°F (10°C), the control will power up normally. If in the home position, the control will enter the freeze cycle.

How to enter service mode on a scuba diver?

The service mode is entered by pushing the feeler arm from the "out" position to the "in" position

A B C D E F G H I J K L M N O P Q R S T U V W X Y Z 1 2 3 4 5 6 7 8 9
8.3.21PHP Version392msRequest Duration2MBMemory UsageGET {post}Route
  • warninglog[17:05:22] LOG.warning: Creation of dynamic property Barryvdh\Debugbar\DataFormatter\QueryFormatter:...
  • warninglog[17:05:22] LOG.warning: Creation of dynamic property Barryvdh\Debugbar\DataFormatter\QueryFormatter:...
  • warninglog[17:05:22] LOG.warning: Callables of the form ["Swift_SmtpTransport", "Swift_Transport_EsmtpTranspor...
  • warninglog[17:05:22] LOG.warning: Creation of dynamic property Barryvdh\Debugbar\DataFormatter\SimpleFormatter...
  • warninglog[17:05:22] LOG.warning: Creation of dynamic property Barryvdh\Debugbar\DataFormatter\SimpleFormatter...
  • warninglog[17:05:22] LOG.warning: json_decode(): Passing null to parameter #1 ($json) of type string is deprec...
  • warninglog[17:05:22] LOG.warning: json_decode(): Passing null to parameter #1 ($json) of type string is deprec...
  • warninglog[17:05:22] LOG.warning: json_decode(): Passing null to parameter #1 ($json) of type string is deprec...
  • warninglog[17:05:22] LOG.warning: json_decode(): Passing null to parameter #1 ($json) of type string is deprec...
  • warninglog[17:05:22] LOG.warning: json_decode(): Passing null to parameter #1 ($json) of type string is deprec...
  • warninglog[17:05:22] LOG.warning: json_decode(): Passing null to parameter #1 ($json) of type string is deprec...
  • warninglog[17:05:22] LOG.warning: json_decode(): Passing null to parameter #1 ($json) of type string is deprec...
  • warninglog[17:05:22] LOG.warning: json_decode(): Passing null to parameter #1 ($json) of type string is deprec...
  • warninglog[17:05:22] LOG.warning: mt_rand(): Passing null to parameter #2 ($max) of type int is deprecated in ...
  • Booting (10.4ms)
  • Application (381ms)
  • 1 x Application (97.25%)
    381.23ms
    1 x Booting (2.65%)
    10.40ms
    7 templates were rendered
    • themes.DevBlog.content.post (resources/views/themes/DevBlog/content/post.blade.php)34blade
      Params
      0
      post
      1
      postContent
      2
      author
      3
      updated_at
      4
      bing_rich_snippet_text
      5
      bing_rich_snippet_link
      6
      bing_related_keywords
      7
      google_related_keywords
      8
      bing_news_title
      9
      bing_news_description
      10
      bing_videos
      11
      bing_images
      12
      bing_search_result_title
      13
      bing_search_result_description
      14
      bing_search_result_url
      15
      bing_paa_questions
      16
      bing_paa_answers
      17
      bing_slider_faq_questions
      18
      bing_slider_faq_answers
      19
      bing_pop_faq_questions
      20
      bing_pop_faq_answers
      21
      bing_tab_faq_questions
      22
      bing_tab_faq_answers
      23
      google_faq_questions
      24
      google_faq_answers
      25
      google_rich_snippet
      26
      google_search_result
      27
      indexedArray
      28
      total_images
      29
      total_videos
      30
      settings
      31
      url_current
      32
      menus
      33
      sidebar
    • themes.DevBlog.layouts.master (resources/views/themes/DevBlog/layouts/master.blade.php)41blade
      Params
      0
      __env
      1
      app
      2
      errors
      3
      post
      4
      postContent
      5
      author
      6
      updated_at
      7
      bing_rich_snippet_text
      8
      bing_rich_snippet_link
      9
      bing_related_keywords
      10
      google_related_keywords
      11
      bing_news_title
      12
      bing_news_description
      13
      bing_videos
      14
      bing_images
      15
      bing_search_result_title
      16
      bing_search_result_description
      17
      bing_search_result_url
      18
      bing_paa_questions
      19
      bing_paa_answers
      20
      bing_slider_faq_questions
      21
      bing_slider_faq_answers
      22
      bing_pop_faq_questions
      23
      bing_pop_faq_answers
      24
      bing_tab_faq_questions
      25
      bing_tab_faq_answers
      26
      google_faq_questions
      27
      google_faq_answers
      28
      google_rich_snippet
      29
      google_search_result
      30
      indexedArray
      31
      total_images
      32
      total_videos
      33
      settings
      34
      url_current
      35
      menus
      36
      sidebar
      37
      i
      38
      __currentLoopData
      39
      loop
      40
      item
    • themes.DevBlog.panels.head (resources/views/themes/DevBlog/panels/head.blade.php)41blade
      Params
      0
      __env
      1
      app
      2
      errors
      3
      post
      4
      postContent
      5
      author
      6
      updated_at
      7
      bing_rich_snippet_text
      8
      bing_rich_snippet_link
      9
      bing_related_keywords
      10
      google_related_keywords
      11
      bing_news_title
      12
      bing_news_description
      13
      bing_videos
      14
      bing_images
      15
      bing_search_result_title
      16
      bing_search_result_description
      17
      bing_search_result_url
      18
      bing_paa_questions
      19
      bing_paa_answers
      20
      bing_slider_faq_questions
      21
      bing_slider_faq_answers
      22
      bing_pop_faq_questions
      23
      bing_pop_faq_answers
      24
      bing_tab_faq_questions
      25
      bing_tab_faq_answers
      26
      google_faq_questions
      27
      google_faq_answers
      28
      google_rich_snippet
      29
      google_search_result
      30
      indexedArray
      31
      total_images
      32
      total_videos
      33
      settings
      34
      url_current
      35
      menus
      36
      sidebar
      37
      i
      38
      __currentLoopData
      39
      loop
      40
      item
    • themes.DevBlog.panels.header (resources/views/themes/DevBlog/panels/header.blade.php)41blade
      Params
      0
      __env
      1
      app
      2
      errors
      3
      post
      4
      postContent
      5
      author
      6
      updated_at
      7
      bing_rich_snippet_text
      8
      bing_rich_snippet_link
      9
      bing_related_keywords
      10
      google_related_keywords
      11
      bing_news_title
      12
      bing_news_description
      13
      bing_videos
      14
      bing_images
      15
      bing_search_result_title
      16
      bing_search_result_description
      17
      bing_search_result_url
      18
      bing_paa_questions
      19
      bing_paa_answers
      20
      bing_slider_faq_questions
      21
      bing_slider_faq_answers
      22
      bing_pop_faq_questions
      23
      bing_pop_faq_answers
      24
      bing_tab_faq_questions
      25
      bing_tab_faq_answers
      26
      google_faq_questions
      27
      google_faq_answers
      28
      google_rich_snippet
      29
      google_search_result
      30
      indexedArray
      31
      total_images
      32
      total_videos
      33
      settings
      34
      url_current
      35
      menus
      36
      sidebar
      37
      i
      38
      __currentLoopData
      39
      loop
      40
      item
    • themes.DevBlog.panels.navbar (resources/views/themes/DevBlog/panels/navbar.blade.php)41blade
      Params
      0
      __env
      1
      app
      2
      errors
      3
      post
      4
      postContent
      5
      author
      6
      updated_at
      7
      bing_rich_snippet_text
      8
      bing_rich_snippet_link
      9
      bing_related_keywords
      10
      google_related_keywords
      11
      bing_news_title
      12
      bing_news_description
      13
      bing_videos
      14
      bing_images
      15
      bing_search_result_title
      16
      bing_search_result_description
      17
      bing_search_result_url
      18
      bing_paa_questions
      19
      bing_paa_answers
      20
      bing_slider_faq_questions
      21
      bing_slider_faq_answers
      22
      bing_pop_faq_questions
      23
      bing_pop_faq_answers
      24
      bing_tab_faq_questions
      25
      bing_tab_faq_answers
      26
      google_faq_questions
      27
      google_faq_answers
      28
      google_rich_snippet
      29
      google_search_result
      30
      indexedArray
      31
      total_images
      32
      total_videos
      33
      settings
      34
      url_current
      35
      menus
      36
      sidebar
      37
      i
      38
      __currentLoopData
      39
      loop
      40
      item
    • themes.DevBlog.panels.footer (resources/views/themes/DevBlog/panels/footer.blade.php)41blade
      Params
      0
      __env
      1
      app
      2
      errors
      3
      post
      4
      postContent
      5
      author
      6
      updated_at
      7
      bing_rich_snippet_text
      8
      bing_rich_snippet_link
      9
      bing_related_keywords
      10
      google_related_keywords
      11
      bing_news_title
      12
      bing_news_description
      13
      bing_videos
      14
      bing_images
      15
      bing_search_result_title
      16
      bing_search_result_description
      17
      bing_search_result_url
      18
      bing_paa_questions
      19
      bing_paa_answers
      20
      bing_slider_faq_questions
      21
      bing_slider_faq_answers
      22
      bing_pop_faq_questions
      23
      bing_pop_faq_answers
      24
      bing_tab_faq_questions
      25
      bing_tab_faq_answers
      26
      google_faq_questions
      27
      google_faq_answers
      28
      google_rich_snippet
      29
      google_search_result
      30
      indexedArray
      31
      total_images
      32
      total_videos
      33
      settings
      34
      url_current
      35
      menus
      36
      sidebar
      37
      i
      38
      __currentLoopData
      39
      loop
      40
      item
    • themes.DevBlog.panels.scripts (resources/views/themes/DevBlog/panels/scripts.blade.php)41blade
      Params
      0
      __env
      1
      app
      2
      errors
      3
      post
      4
      postContent
      5
      author
      6
      updated_at
      7
      bing_rich_snippet_text
      8
      bing_rich_snippet_link
      9
      bing_related_keywords
      10
      google_related_keywords
      11
      bing_news_title
      12
      bing_news_description
      13
      bing_videos
      14
      bing_images
      15
      bing_search_result_title
      16
      bing_search_result_description
      17
      bing_search_result_url
      18
      bing_paa_questions
      19
      bing_paa_answers
      20
      bing_slider_faq_questions
      21
      bing_slider_faq_answers
      22
      bing_pop_faq_questions
      23
      bing_pop_faq_answers
      24
      bing_tab_faq_questions
      25
      bing_tab_faq_answers
      26
      google_faq_questions
      27
      google_faq_answers
      28
      google_rich_snippet
      29
      google_search_result
      30
      indexedArray
      31
      total_images
      32
      total_videos
      33
      settings
      34
      url_current
      35
      menus
      36
      sidebar
      37
      i
      38
      __currentLoopData
      39
      loop
      40
      item
    uri
    GET {post}
    middleware
    web, checkdate
    as
    post.show
    controller
    App\Http\Controllers\Frontend\json_data\PostController@show
    namespace
    where
    file
    app/Http/Controllers/Frontend/json_data/PostController.php:18-166
    7 statements were executed361ms
    • select * from `posts` where `published_at` <= '2025-06-28 17:05:22' and `slug` = 'ge-ice-maker-diagnostic-test' and `posts`.`deleted_at` is null limit 1
      2.05ms/app/Providers/RouteServiceProvider.php:54receivinghelpdeskask
      Metadata
      Bindings
      • 0. 2025-06-28 17:05:22
      • 1. ge-ice-maker-diagnostic-test
      Backtrace
      • 15. /app/Providers/RouteServiceProvider.php:54
      • 18. /vendor/laravel/framework/src/Illuminate/Routing/Router.php:842
      • 19. Route binding:39
      • 20. /vendor/laravel/framework/src/Illuminate/Pipeline/Pipeline.php:167
      • 21. /vendor/laravel/framework/src/Illuminate/Foundation/Http/Middleware/VerifyCsrfToken.php:78
    • select * from `json_post_contents` where `json_post_contents`.`post_id` = 15819 and `json_post_contents`.`post_id` is not null and `rewrite_id` = 0
      4.21msmiddleware::checkdate:30receivinghelpdeskask
      Metadata
      Bindings
      • 0. 15819
      • 1. 0
      Backtrace
      • 19. middleware::checkdate:30
      • 20. /vendor/laravel/framework/src/Illuminate/Pipeline/Pipeline.php:167
      • 21. /vendor/laravel/jetstream/src/Http/Middleware/ShareInertiaData.php:61
      • 22. /vendor/laravel/framework/src/Illuminate/Pipeline/Pipeline.php:167
      • 23. /vendor/laravel/framework/src/Illuminate/Routing/Middleware/SubstituteBindings.php:50
    • select * from `nova_menu_menus` where `slug` = 'header' limit 1
      550μs/vendor/outl1ne/nova-menu-builder/src/helpers.php:32receivinghelpdeskask
      Metadata
      Bindings
      • 0. header
      Backtrace
      • 15. /vendor/outl1ne/nova-menu-builder/src/helpers.php:32
      • 17. /vendor/laravel/framework/src/Illuminate/Routing/Controller.php:54
      • 18. /vendor/laravel/framework/src/Illuminate/Routing/ControllerDispatcher.php:45
      • 19. /vendor/laravel/framework/src/Illuminate/Routing/Route.php:261
      • 20. /vendor/laravel/framework/src/Illuminate/Routing/Route.php:205
    • select * from `nova_menu_menu_items` where `nova_menu_menu_items`.`menu_id` = 1 and `nova_menu_menu_items`.`menu_id` is not null and `parent_id` is null order by `parent_id` asc, `order` asc, `name` asc
      330μs/vendor/outl1ne/nova-menu-builder/src/Models/Menu.php:35receivinghelpdeskask
      Metadata
      Bindings
      • 0. 1
      Backtrace
      • 19. /vendor/outl1ne/nova-menu-builder/src/Models/Menu.php:35
      • 20. /vendor/outl1ne/nova-menu-builder/src/helpers.php:33
      • 22. /vendor/laravel/framework/src/Illuminate/Routing/Controller.php:54
      • 23. /vendor/laravel/framework/src/Illuminate/Routing/ControllerDispatcher.php:45
      • 24. /vendor/laravel/framework/src/Illuminate/Routing/Route.php:261
    • select * from `nova_menu_menu_items` where `nova_menu_menu_items`.`parent_id` in (1) order by `order` asc
      350μs/vendor/outl1ne/nova-menu-builder/src/Models/Menu.php:35receivinghelpdeskask
      Metadata
      Backtrace
      • 24. /vendor/outl1ne/nova-menu-builder/src/Models/Menu.php:35
      • 25. /vendor/outl1ne/nova-menu-builder/src/helpers.php:33
      • 27. /vendor/laravel/framework/src/Illuminate/Routing/Controller.php:54
      • 28. /vendor/laravel/framework/src/Illuminate/Routing/ControllerDispatcher.php:45
      • 29. /vendor/laravel/framework/src/Illuminate/Routing/Route.php:261
    • select `id`, `post_title`, `slug` from `posts` where `status` = 'publish' and `posts`.`deleted_at` is null order by RAND() limit 10
      352ms/app/View/Composers/SidebarView.php:22receivinghelpdeskask
      Metadata
      Bindings
      • 0. publish
      Backtrace
      • 14. /app/View/Composers/SidebarView.php:22
      • 15. /app/View/Composers/SidebarView.php:12
      • 16. /vendor/laravel/framework/src/Illuminate/View/Concerns/ManagesEvents.php:124
      • 17. /vendor/laravel/framework/src/Illuminate/View/Concerns/ManagesEvents.php:162
      • 20. /vendor/laravel/framework/src/Illuminate/View/Concerns/ManagesEvents.php:177
    • select * from `fake_users` where `fake_users`.`id` = 1132 limit 1
      810μsview::2dd102cf0462e89a4d4d8bc77355d767652bf9aa:15receivinghelpdeskask
      Metadata
      Bindings
      • 0. 1132
      Backtrace
      • 21. view::2dd102cf0462e89a4d4d8bc77355d767652bf9aa:15
      • 23. /vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:108
      • 24. /vendor/laravel/framework/src/Illuminate/View/Engines/PhpEngine.php:58
      • 25. /vendor/livewire/livewire/src/ComponentConcerns/RendersLivewireComponents.php:69
      • 26. /vendor/laravel/framework/src/Illuminate/View/Engines/CompilerEngine.php:61
    App\Models\FakeUser
    1
    Outl1ne\MenuBuilder\Models\MenuItem
    1
    Outl1ne\MenuBuilder\Models\Menu
    1
    App\Models\JsonPostContent
    1
    App\Models\Post
    11
        _token
        ejfurYCRJ27yFmkUgAW8m6qBWEytkQilUOuURt5Q
        _previous
        array:1 [ "url" => "https://receivinghelpdesk.com/ask/ge-ice-maker-diagnostic-test" ]
        _flash
        array:2 [ "old" => [] "new" => [] ]
        PHPDEBUGBAR_STACK_DATA
        []
        path_info
        /ge-ice-maker-diagnostic-test
        status_code
        200
        
        status_text
        OK
        format
        html
        content_type
        text/html; charset=UTF-8
        request_query
        []
        
        request_request
        []
        
        request_headers
        0 of 0
        array:25 [ "cookie" => array:1 [ 0 => "_pk_id.64.7c30=b30b69402a23e4a8.1751110516.; _pk_ses.64.7c30=1; XSRF-TOKEN=eyJpdiI6Ik1HVHp6S0FhTklNZzFkemlxb0tWVFE9PSIsInZhbHVlIjoicVEwb0Y3ODlMZ3JnQXlIK3o2Q0h1L2ZNMGhUNE5oQzZiVjRhNE1TK0dhQjR6WlFyREk0QzhUN1RSNm42cXVaTElXRUhBYXo4dC9TSmQxNHRkcXpFc2NoTjNuaTZDOGNVdUV4cTltRE1yU25lZ3Z1QkJseHpBNG10aW1DMC9uOGoiLCJtYWMiOiJkMmRkYjdiYjNmMzMwZjYwM2JmMWEwNTM4NWM0Zjg1MDExZTQzYzljYmY3ZDdjMDk5MjVmMGZkY2RmYTRmOTI3IiwidGFnIjoiIn0%3D; askhelpdesk_session=eyJpdiI6IkJZVVQrNmJLaUJZa0YyS1hUWHA2M2c9PSIsInZhbHVlIjoiNVZEMXJhNnNUOXJ2cVdxNUhSTjVDZXphSysxVkh5ajVKQmVSczFIRTBFTy9YY1hqeGF2UGtCODA2M0tScFJpTUtOVGk0bU05YjBxMTVBM0NITExrbnU2TWFydnZTNHAwYVV4TWZ1eDFPam5HanltQSs3UEtDQmdVZlJ5YXNWY0UiLCJtYWMiOiI4YjJmYjllM2Q4Y2NlODAzYzJhMzdjODIxMTBkNWYwMTYxMzJmYzUyMDljMDExYTU0Mjc1ZGEyZGFjOTIwMTQwIiwidGFnIjoiIn0%3D_pk_id.64.7c30=b30b69402a23e4a8.1751110516.; _pk_ses.64.7c30=1; XSRF-TOKEN=eyJpdiI6Ik1HVHp6S0FhTklNZzFkemlxb0tWVFE9PSIsInZhbHVlIjoicVEwb0Y3ODlMZ3JnQXlIK3o2Q0h1L" ] "cf-ipcountry" => array:1 [ 0 => "US" ] "cf-connecting-ip" => array:1 [ 0 => "216.73.216.147" ] "cdn-loop" => array:1 [ 0 => "cloudflare; loops=1" ] "sec-fetch-mode" => array:1 [ 0 => "navigate" ] "sec-fetch-site" => array:1 [ 0 => "none" ] "accept" => array:1 [ 0 => "text/html,application/xhtml+xml,application/xml;q=0.9,image/avif,image/webp,image/apng,*/*;q=0.8,application/signed-exchange;v=b3;q=0.7" ] "user-agent" => array:1 [ 0 => "Mozilla/5.0 AppleWebKit/537.36 (KHTML, like Gecko; compatible; ClaudeBot/1.0; +claudebot@anthropic.com)" ] "upgrade-insecure-requests" => array:1 [ 0 => "1" ] "sec-ch-ua-platform" => array:1 [ 0 => ""Windows"" ] "sec-ch-ua-mobile" => array:1 [ 0 => "?0" ] "sec-ch-ua" => array:1 [ 0 => ""Chromium";v="130", "HeadlessChrome";v="130", "Not?A_Brand";v="99"" ] "cache-control" => array:1 [ 0 => "no-cache" ] "pragma" => array:1 [ 0 => "no-cache" ] "accept-encoding" => array:1 [ 0 => "gzip, br" ] "cf-ray" => array:1 [ 0 => "956ce15e7e3b0d35-ORD" ] "priority" => array:1 [ 0 => "u=0, i" ] "sec-fetch-dest" => array:1 [ 0 => "document" ] "sec-fetch-user" => array:1 [ 0 => "?1" ] "cf-visitor" => array:1 [ 0 => "{"scheme":"https"}" ] "connection" => array:1 [ 0 => "close" ] "x-forwarded-proto" => array:1 [ 0 => "https" ] "x-forwarded-for" => array:1 [ 0 => "216.73.216.147, 172.69.58.146" ] "x-server-addr" => array:1 [ 0 => "154.12.239.204" ] "host" => array:1 [ 0 => "receivinghelpdesk.com" ] ]
        request_server
        0 of 0
        array:56 [ "USER" => "runcloud" "HOME" => "/home/runcloud" "SCRIPT_NAME" => "/ask/index.php" "REQUEST_URI" => "/ask/ge-ice-maker-diagnostic-test" "QUERY_STRING" => "" "REQUEST_METHOD" => "GET" "SERVER_PROTOCOL" => "HTTP/1.0" "GATEWAY_INTERFACE" => "CGI/1.1" "REDIRECT_URL" => "/ask/ge-ice-maker-diagnostic-test" "REMOTE_PORT" => "36884" "SCRIPT_FILENAME" => "/home/runcloud/webapps/ReceivingHelpDesk/ask/index.php" "SERVER_ADMIN" => "you@example.com" "CONTEXT_DOCUMENT_ROOT" => "/home/runcloud/webapps/ReceivingHelpDesk/" "CONTEXT_PREFIX" => "" "REQUEST_SCHEME" => "http" "DOCUMENT_ROOT" => "/home/runcloud/webapps/ReceivingHelpDesk/" "REMOTE_ADDR" => "172.69.58.146" "SERVER_PORT" => "80" "SERVER_ADDR" => "127.0.0.1" "SERVER_NAME" => "receivinghelpdesk.com" "SERVER_SOFTWARE" => "Apache/2.4.63 (Unix) OpenSSL/1.1.1f" "SERVER_SIGNATURE" => "" "LD_LIBRARY_PATH" => "/RunCloud/Packages/apache2-rc/lib" "PATH" => "/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin" "HTTP_COOKIE" => "_pk_id.64.7c30=b30b69402a23e4a8.1751110516.; _pk_ses.64.7c30=1; XSRF-TOKEN=eyJpdiI6Ik1HVHp6S0FhTklNZzFkemlxb0tWVFE9PSIsInZhbHVlIjoicVEwb0Y3ODlMZ3JnQXlIK3o2Q0h1L2ZNMGhUNE5oQzZiVjRhNE1TK0dhQjR6WlFyREk0QzhUN1RSNm42cXVaTElXRUhBYXo4dC9TSmQxNHRkcXpFc2NoTjNuaTZDOGNVdUV4cTltRE1yU25lZ3Z1QkJseHpBNG10aW1DMC9uOGoiLCJtYWMiOiJkMmRkYjdiYjNmMzMwZjYwM2JmMWEwNTM4NWM0Zjg1MDExZTQzYzljYmY3ZDdjMDk5MjVmMGZkY2RmYTRmOTI3IiwidGFnIjoiIn0%3D; askhelpdesk_session=eyJpdiI6IkJZVVQrNmJLaUJZa0YyS1hUWHA2M2c9PSIsInZhbHVlIjoiNVZEMXJhNnNUOXJ2cVdxNUhSTjVDZXphSysxVkh5ajVKQmVSczFIRTBFTy9YY1hqeGF2UGtCODA2M0tScFJpTUtOVGk0bU05YjBxMTVBM0NITExrbnU2TWFydnZTNHAwYVV4TWZ1eDFPam5HanltQSs3UEtDQmdVZlJ5YXNWY0UiLCJtYWMiOiI4YjJmYjllM2Q4Y2NlODAzYzJhMzdjODIxMTBkNWYwMTYxMzJmYzUyMDljMDExYTU0Mjc1ZGEyZGFjOTIwMTQwIiwidGFnIjoiIn0%3D_pk_id.64.7c30=b30b69402a23e4a8.1751110516.; _pk_ses.64.7c30=1; XSRF-TOKEN=eyJpdiI6Ik1HVHp6S0FhTklNZzFkemlxb0tWVFE9PSIsInZhbHVlIjoicVEwb0Y3ODlMZ3JnQXlIK3o2Q0h1L" "HTTP_CF_IPCOUNTRY" => "US" "HTTP_CF_CONNECTING_IP" => "216.73.216.147" "HTTP_CDN_LOOP" => "cloudflare; loops=1" "HTTP_SEC_FETCH_MODE" => "navigate" "HTTP_SEC_FETCH_SITE" => "none" "HTTP_ACCEPT" => "text/html,application/xhtml+xml,application/xml;q=0.9,image/avif,image/webp,image/apng,*/*;q=0.8,application/signed-exchange;v=b3;q=0.7" "HTTP_USER_AGENT" => "Mozilla/5.0 AppleWebKit/537.36 (KHTML, like Gecko; compatible; ClaudeBot/1.0; +claudebot@anthropic.com)" "HTTP_UPGRADE_INSECURE_REQUESTS" => "1" "HTTP_SEC_CH_UA_PLATFORM" => ""Windows"" "HTTP_SEC_CH_UA_MOBILE" => "?0" "HTTP_SEC_CH_UA" => ""Chromium";v="130", "HeadlessChrome";v="130", "Not?A_Brand";v="99"" "HTTP_CACHE_CONTROL" => "no-cache" "HTTP_PRAGMA" => "no-cache" "HTTP_ACCEPT_ENCODING" => "gzip, br" "HTTP_CF_RAY" => "956ce15e7e3b0d35-ORD" "HTTP_PRIORITY" => "u=0, i" "HTTP_SEC_FETCH_DEST" => "document" "HTTP_SEC_FETCH_USER" => "?1" "HTTP_CF_VISITOR" => "{"scheme":"https"}" "HTTP_CONNECTION" => "close" "HTTP_X_FORWARDED_PROTO" => "https" "HTTP_X_FORWARDED_FOR" => "216.73.216.147, 172.69.58.146" "HTTP_X_SERVER_ADDR" => "154.12.239.204" "HTTP_HOST" => "receivinghelpdesk.com" "HTTPS" => "on" "REDIRECT_STATUS" => "200" "REDIRECT_HTTPS" => "on" "FCGI_ROLE" => "RESPONDER" "PHP_SELF" => "/ask/index.php" "REQUEST_TIME_FLOAT" => 1751110522.6523 "REQUEST_TIME" => 1751110522 ]
        request_cookies
        0 of 0
        array:4 [ "_pk_id_64_7c30" => null "_pk_ses_64_7c30" => null "XSRF-TOKEN" => "ejfurYCRJ27yFmkUgAW8m6qBWEytkQilUOuURt5Q" "askhelpdesk_session" => "1t3UHjm6DMxlqCK6EeNW0N4YOfLuPHZKdGdNqecx" ]
        response_headers
        0 of 0
        array:7 [ "content-type" => array:1 [ 0 => "text/html; charset=UTF-8" ] "cache-control" => array:1 [ 0 => "private, must-revalidate" ] "date" => array:1 [ 0 => "Sat, 28 Jun 2025 11:35:22 GMT" ] "pragma" => array:1 [ 0 => "no-cache" ] "expires" => array:1 [ 0 => -1 ] "set-cookie" => array:2 [ 0 => "XSRF-TOKEN=eyJpdiI6InR1ZlRXWkQ3OVgwRTBERjkyOENmTWc9PSIsInZhbHVlIjoiOWtyNkNmcGpRVENQdTBPang3VVo3UCs4ZnRwSVVyRUtDdWp2MGJJckgxUUJ2akMwMFNsWmxMR2YrMmxGRDNhV3FDUnBsdjJBaVQ4MnZlUWxtQ2QvRUZqZzBYaVBycndPL0hTOFloKzQ1a0JHdi9JSDZqK0RqN0ZTRnBJQWN2VzMiLCJtYWMiOiI5NmQ4NzZlNDBhZGQ5MjYxNjg3YWQ2OWI0NmE2ZTZmN2E4OTQ0YTY4MmU0NmY3OGY1YzFmMjgxZDA1MDIyMDBiIiwidGFnIjoiIn0%3D; expires=Sat, 28-Jun-2025 13:35:23 GMT; Max-Age=7200; path=/; samesite=laxXSRF-TOKEN=eyJpdiI6InR1ZlRXWkQ3OVgwRTBERjkyOENmTWc9PSIsInZhbHVlIjoiOWtyNkNmcGpRVENQdTBPang3VVo3UCs4ZnRwSVVyRUtDdWp2MGJJckgxUUJ2akMwMFNsWmxMR2YrMmxGRDNhV3FDUnBsd" 1 => "askhelpdesk_session=eyJpdiI6InJRMEJmUHF2dnZUT21HemsxMjBsRlE9PSIsInZhbHVlIjoibjF0V2NiNkdvTzYxRXFJaEo5MGlHMHc5Tzc1M2xVOThSYTRpZldNMnptcTVicm0xTFlFYU5uZmI3UG43UTBhZ2NmMWVNUzIrbEJBM1d5NjNxNnc1MWVtUWRIc09ibHhFTzBnejQxYzdHS1NiSDVVbEY5TG5uTkVrV3NMSlVyYloiLCJtYWMiOiI0YTg5N2Y5OGNiYTY0OTgwOWRiYWIzMTA2NDE2NTkxNjQ5N2E5NGYyODZlYzg2YjQ3ODJiNTU0NDdkYmJlMjRmIiwidGFnIjoiIn0%3D; expires=Sat, 28-Jun-2025 13:35:23 GMT; Max-Age=7200; path=/; httponly; samesite=laxaskhelpdesk_session=eyJpdiI6InJRMEJmUHF2dnZUT21HemsxMjBsRlE9PSIsInZhbHVlIjoibjF0V2NiNkdvTzYxRXFJaEo5MGlHMHc5Tzc1M2xVOThSYTRpZldNMnptcTVicm0xTFlFYU5uZmI3UG43UTBh" ] "Set-Cookie" => array:2 [ 0 => "XSRF-TOKEN=eyJpdiI6InR1ZlRXWkQ3OVgwRTBERjkyOENmTWc9PSIsInZhbHVlIjoiOWtyNkNmcGpRVENQdTBPang3VVo3UCs4ZnRwSVVyRUtDdWp2MGJJckgxUUJ2akMwMFNsWmxMR2YrMmxGRDNhV3FDUnBsdjJBaVQ4MnZlUWxtQ2QvRUZqZzBYaVBycndPL0hTOFloKzQ1a0JHdi9JSDZqK0RqN0ZTRnBJQWN2VzMiLCJtYWMiOiI5NmQ4NzZlNDBhZGQ5MjYxNjg3YWQ2OWI0NmE2ZTZmN2E4OTQ0YTY4MmU0NmY3OGY1YzFmMjgxZDA1MDIyMDBiIiwidGFnIjoiIn0%3D; expires=Sat, 28-Jun-2025 13:35:23 GMT; path=/XSRF-TOKEN=eyJpdiI6InR1ZlRXWkQ3OVgwRTBERjkyOENmTWc9PSIsInZhbHVlIjoiOWtyNkNmcGpRVENQdTBPang3VVo3UCs4ZnRwSVVyRUtDdWp2MGJJckgxUUJ2akMwMFNsWmxMR2YrMmxGRDNhV3FDUnBsd" 1 => "askhelpdesk_session=eyJpdiI6InJRMEJmUHF2dnZUT21HemsxMjBsRlE9PSIsInZhbHVlIjoibjF0V2NiNkdvTzYxRXFJaEo5MGlHMHc5Tzc1M2xVOThSYTRpZldNMnptcTVicm0xTFlFYU5uZmI3UG43UTBhZ2NmMWVNUzIrbEJBM1d5NjNxNnc1MWVtUWRIc09ibHhFTzBnejQxYzdHS1NiSDVVbEY5TG5uTkVrV3NMSlVyYloiLCJtYWMiOiI0YTg5N2Y5OGNiYTY0OTgwOWRiYWIzMTA2NDE2NTkxNjQ5N2E5NGYyODZlYzg2YjQ3ODJiNTU0NDdkYmJlMjRmIiwidGFnIjoiIn0%3D; expires=Sat, 28-Jun-2025 13:35:23 GMT; path=/; httponlyaskhelpdesk_session=eyJpdiI6InJRMEJmUHF2dnZUT21HemsxMjBsRlE9PSIsInZhbHVlIjoibjF0V2NiNkdvTzYxRXFJaEo5MGlHMHc5Tzc1M2xVOThSYTRpZldNMnptcTVicm0xTFlFYU5uZmI3UG43UTBh" ] ]
        session_attributes
        0 of 0
        array:4 [ "_token" => "ejfurYCRJ27yFmkUgAW8m6qBWEytkQilUOuURt5Q" "_previous" => array:1 [ "url" => "https://receivinghelpdesk.com/ask/ge-ice-maker-diagnostic-test" ] "_flash" => array:2 [ "old" => [] "new" => [] ] "PHPDEBUGBAR_STACK_DATA" => [] ]