GE circuit breaker compatibility chart
| Breakers Name | Ampere Rating |
| Eaton Breakers | 20 Amps |
| Siemens Breakers | 15 Amps |
| Homeline Breakers | 20 Amps |
| Murray Breakers | 150 Amps |
Full Answer
What breakers are compatible with GE panel?
How To Check Compatibility of GE Breaker With Other Breakers?
- Check The Panel. It should have labeling that shows the breakers that can work with the panel. ...
- Ask The Manufacturer. More often than not, the manufacturer expects consumers to use panels and breakers from the same brand.
- Use UL-Classified Breakers. Third-party breakers that work in GE panels are called UL-Classified breakers. ...
Are GE Breakers compatible with Siemens?
Siemens fits GE Siemens breakers can be used in GE breaker boxes, and they are generally known to be compatible. Match the size and voltage requirements when using Siemens breakers, as using the wrong breakers can have dangerous results.
Are GE and Eaton Breakers interchangeable?
Eaton's UL classified breakers are designed and tested to be both mechanically and electrically interchangeable with circuit breakers manufactured by General Electric, Thomas & Betts, ITE/Siemens, Murray, Crouse-Hinds, and Square D.
How to find the proper size of circuit breaker?
Steps on How to Calculate Circuit Breaker and Wire Size
- Determine all the running current. The first thing to do before you start sizing the breaker is to determine all your devices’ current.
- Calculate the current draw & circuit breaker size. After getting the sum of all active current-consuming devices, you need to compute the current draw by dividing the resulting ...
- Calculate safe circuit load. ...
What breaker is compatible with GE?
Siemens breakers can be used in GE breaker boxes, and they are generally known to be compatible.
Will a Eaton breaker fit in a GE panel?
Yes, the Eaton breaker would fit in the space. And the breaker may even have indents to allow it to fit into the slim spaces of a GE panel.
Are GE breakers compatible with Square D?
In short, Square D compatible breakers are Siemens, Cutler Hammer, Eaton, GE Breaker, Murray, Westinghouse, and Home Fitline.
What breakers are interchangeable?
Specified breakers are breakers that have been tested and listed for a panel by the manufacturer. Interchangeable breakers are breakers that have been tested in the panels that they are approved for and are similar to specified breakers, typically by a third party such as Underwriter's Laboratory (UL).
Are GE and Challenger breakers compatible?
If you have a Challenger system, however, you need to arrange a panel upgrade. If your Challenger model is no longer made, circuit breakers can be replaced with several compatible brands, including GE.
Can you mix circuit breaker brands?
Never place a different brand circuit breaker in a circuit breaker panel of a different brand. Contrary to the belief that they are all the same and will work in any circuit breaker panel, the fact is just the opposite. Circuit breakers may actually fit, but not properly.
What breakers are interchangeable with Square D?
Square D QO breakers are compatible with QO breaker boxes and CSEDs. Each ANSI-certified and UL-listed. Homeline circuit breakers are built with the same Square D brand quality you have come to expect at a price that makes them the best value in their class.
What does QO mean on a circuit breaker?
These “Qwik-Open” or QO breakers are the fastest opening breakers in use in the industry. They reportedly open after just one full power cycle of a 60 Hz AC line (about 1/60th of a second). These breakers feature a visual trip indicator and make it easy to quickly spot the tripped breaker in the panel.
Can you use other breakers in Square D panel?
Manufacturers like Square D warns against the use of Classified and interchangeable breakers. They site the National Electrical Code (NEC) Section 110-3(b), which states that using breakers not listed or labeled is a code violation.
What are the four types of circuit breakers?
An electrician can best determine the circuit breaker type required for your home.Single-Pole Circuit Breakers. Single-pole circuit breakers are the type most often found in homes today. ... Double-Pole Circuit Breakers. ... GFCI Circuit Breakers. ... AFCI Circuit Breakers.
What are the three types of circuit breakers?
The three main types of circuit breakers are standard, GFCI and AFCI. Some models have dual functionality. Each handles different amp capacities and operates in different locations in the home.
What are the three types of breakers?
There are three basic types of breaking waves: spilling breakers, plunging breakers, and surging breakers.
What Circuit Breakers Are Compatible With Square D?
Siemens breakers can work in the place of square D. The brand has a QD series breaker that can work in square D panels. The breakers are versatile enough to work in most interchangeable panels.
How To Find Which Circuit Breakers Are Compatible With Square D?
All the information you need is found inside the service panel’s door. It has a label highlighting the types and brands of breakers you can install.
Can You Mix Different Brands Of Breakers?
Square D has warned its consumers against using breakers from different brands. If an accident occurs because you used a different brand, the company may void your warranty. Keep that concern in mind.
Reasons To Use Other Brands of Breakers With Square D
Many people use different brands because they are more accessible. In other words, their local store doesn’t carry square D breakers, and rather than buying them online and waiting for them to arrive, it is easier to buy a different brand from the local store.
What happens if you put a home line in a GE panel?
One of my pet peeves is "Homeline in other panels myth". If you put a home line in a GE type panel it will be crooked and put pressure on the contacts and it will eventually fail.
How far are GE breaker ear mounts off center?
The GE type breakers the mounting ears are centered, Homeline they are off centered by 1/16 inch. Two breakers back to back, note the mounting ear on the left breaker (Homeline) in taller on the bottom. The mounting rail on the panel is also off center by the same amount.
Can you install a Classified Breaker anywhere?
In that process, the breakers MUST be tested and listed for use in SPECIFIC panels of competitive suppliers; you cannot willy-nilly install a Classified Breaker anywhere that it will "fit", at least not legally.
Is a GE panel UL listed?
There is NO PANEL that is UL listed using anything other than the ORIGINAL breakers shown in their listing, generally being breakers of the same mfr (although not universally true). So GE PANELS are only listed with GE breakers, Siemens PANELS are only listed with Siemens breakers, etc. etc.
Can a breaker be used in a panel?
BREAKERS are listed for use IN PANELS, but because a breaker mfr can buy any brand of panel and test their breakers inside of it, they can list their breakers as RETROFIT products for EXISTING panels. The official term for this within the UL listing process is referred to as "Classified" listing.
Why Should You Stick to the Official Documentation?
This is because there’s more than a handful of ways that you’ll end up with the wrong breaker otherwise. Is it risky if you go this route?
What About UL Classified Circuit Breakers?
UL classified breakers, especially those made by Eaton, are an exception to what I said. Why? They’re designed for interchangeability with Siemens breakers, simply put.
Take the Time to Test Your Breaker
Even if you’re close to 100% certain that the breaker replacement you buy is compatible with the panel, I’d still suggest you test it first before using it. Check whether it fits the slot intended for it. Believe it or not, some subcontractors even cut breakers with a saw just to make them fit.
Conclusion
To sum it up, you can rely on a number of Siemens circuit breakers cross reference sites online for knowledge, but, to me, they’re not as conclusive and veritable as anything recommended by the brand through its official manuals.