27348 5/16" X 15 FT BARRICADE MPI FUEL
| Product # | 42196038 |
| Centerline Length (m) | 4.57 |
| Hose Inside Diameter (in) | 0.3125 |
| Hose Inside Diameter (mm) | 8 |
| Working Pressure (psi) | 225 |
Full Answer
What is a fuel injection hose?
Barricade® fuel injection hose is a low permeation, multi-fuel compatible hose that virtually eliminates fuel vapor loss thanks to our 5-layer GreenShield® barrier technology. Works with multiple fuels (approved for use with leaded and unleaded petrol, diesel, biodiesel up to B-100, E-10, E-15, E-85, 100% methanol, ethanol and gasohol fuels).
Why choose gates fuel line hoses?
Before you start your engines, equip them with Gates fuel hoses. We’ve engineered our fuel line hoses at the cutting-edge of fuel-efficient, environmentally-safe design, so your engine will perform with superior power. more... less... more... less...
What is barricade fuel injection hose?
Barricade Fuel Injection Hose is a low permeation, multi-fuel compatible hose that virtually eliminates fuel vapor loss thanks to our 5-layer GreenShield barrier technology. Works with multiple fuels (approved for use with leaded and unleaded petrol, diesel, biodiesel up to B-100, E-10, E-15, E-85, 100 percent methanol, ethanol and gasohol fuels).
What is the best fuel hose for advanced fuel formulations?
Advanced fuel formulations require a fuel hose that's up to the task. Barricade® Carburetion hose provides a premium, low-permeation hose solution compatible for use with many fuel systems and fuel types.
Can you use fuel injection hose for fuel line?
0:063:04Fuel Line and Fuel Injection Hoses | ACDelco - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd fuel line hoses and why the correct replacement hoses are vital for use with today's gasolineMoreAnd fuel line hoses and why the correct replacement hoses are vital for use with today's gasoline and diesel fuel blends. It's simple modern fuel hoses are necessary with modern fuels.
What is NBR fuel line?
NBR (nitrile butadiene rubber) Fuel Line. Designed for conveying gasoline, E-85, diesel, and bio-diesel fuels in cars, trucks, buses, etc. Handles temperature ranges of -40 to +257 degrees F. Withstands oil, grease, abrasion, and ozone.
What size is fuel hose?
Fuel Hose SizesAN SizeTube or Hose ODTube or Hose ID-63/8”.297”-81/2”.391”-105/8”.484”-123/4”.609”Mar 6, 2019
What is the OD of 3/8 fuel hose?
FUEL LINE HOSE 9.5MM (3/8") NITRILE TUBE ID 10MM X OD 16MM NON-FUEL INJECTION 50 PSI - Collier & Miller.
What is the best material for fuel lines?
The best fuel line material depends on your needs. However, the best material for fuel lines is polytetrafluoroethylene or PTFE. PTFE fuel line is made of plastic material specifically known as Teflon. This fuel line material is impervious is resistant to the degenerative fuel effects which could form vapor barriers.
Is PTFE hose good for fuel?
For hoses that need to be run inside the cabin, PTFE hoses are ideal, as fuel fumes will not permeate the hose walls. However, as PTFE hoses have a significantly reduced bend radius, more angle and end fittings may be required, which increases the chance of a leak occurring in the system.
Can you use rubber hose fuel injection?
Standard rubber vacuum or heater hose should never be used in fuel applications. The hose will deteriorate from the inside out and can plug fuel filters and carburetors with rubber debris, long before it springs an external leak.
How do I know what size fuel hose I need?
1:293:13How To Measure the Diameter Of Any Hose - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo it's 6 over 16 so 6 6 / 16 very very simplest and all that you do is you're taking 6 sixteenthsMoreSo it's 6 over 16 so 6 6 / 16 very very simplest and all that you do is you're taking 6 sixteenths of an inch and divide it by 2 if you can so 6 16 divided by 2 is 3/8.
Is 3/8 fuel line big enough?
A 3/8”id fuel line can easily support 600 HP given sufficient “pump head”! Given a big enough pump a 3/8” steel line could support 1000 HP. The simple way to know is to install an electronic fuel pressure gauge. If the pressure falls as the engine RPM's go up you need more pump head.
What is the OD of 1/4 inch fuel line?
3/8 InchUniversal Fuel Line - 1/4" ID x 3/8" OD, Sold by the FootInside Diameter1/4 InchOutside Diameter3/8 InchTypeFuel Tank Line
What kind of hose can you use for diesel?
The American Boat & Yacht Council (ABYC) recommends the Type B1 fuel hose for diesel-based applications. The Type A1 hose is the best option for gasoline supply. This hose is less permeable, highly durable, heat resistant and does not collapse under high pressure or vacuum.
What kind of pipe can I use for gasoline?
Steel, copper, brass: The most common gas piping is black steel. Galvanized steel, copper, brass or CSST (Corrugated Stainless Steel Tubing) also can be used in some areas, but some utilities specifically prohibit the use of copper. In other areas, the use of copper is widespread.