Why choose gates fuel line hoses?
Before you start your engines, equip them with Gates fuel hoses. We’ve engineered our fuel line hoses at the cutting-edge of fuel-efficient, environmentally-safe design, so your engine will perform with superior power. more... less... more... less...
Are gates hoses any good?
This Gates hose meets very strict low permeation rates which Ibelieve are higher than the minimum allowed. That means it allows less of your fuel to escape thru the hose walls which keeps it out of our air which is a good thing.
What is an ethanol resistant fuel hose?
This hose is specifically designed to resist damage from the ethanol forced upon us at 10% of our fuel. Etthanol can quickly destroy older rubber hose that was not designed to handle it. If your vehicle is more than 10 years old, make sure to check your hoses for cracking before you wind up with a potentially dangerous fuel leak.
What is a fuel injection hose?
Barricade® fuel injection hose is a low permeation, multi-fuel compatible hose that virtually eliminates fuel vapor loss thanks to our 5-layer GreenShield® barrier technology. Works with multiple fuels (approved for use with leaded and unleaded petrol, diesel, biodiesel up to B-100, E-10, E-15, E-85, 100% methanol, ethanol and gasohol fuels).
What size clamps for 5/16 fuel line?
HPS 100% Stainless Steel 5/16" Fuel Injection Hose Clamp (SAE # 14) with effective size range 1/2" - 19/32" (13mm - 15mm) are perfect for fuel lines and small diameter hoses.
Can you use fuel injection hose for fuel line?
0:063:04Fuel Line and Fuel Injection Hoses | ACDelco - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd fuel line hoses and why the correct replacement hoses are vital for use with today's gasolineMoreAnd fuel line hoses and why the correct replacement hoses are vital for use with today's gasoline and diesel fuel blends. It's simple modern fuel hoses are necessary with modern fuels.
What sizes does fuel line come in?
The sizes typically used in fuel systems are AN6 / Dash 6 / -6, which equates to a thread measuring 9/16” x 18 (threads per inch) with a hose bore around 3/8”, and AN8 / Dash 8 / -8 which has a thread measuring 3/4” x 16 (threads per inch) with a hose bore of around 1/2”.
What is the ID of 3/8 fuel line?
LDR Industries Fuel Line, 3/8 in. I.D., 516 F385 at Tractor Supply Co.
What kind of hose can I use for a fuel line?
PTFE Lined Hose is the best soft hose you can use and generally has a braided stainless or braided nylon exterior. The PTFE liner blocks fuel vapors and slows the degradation process. PTFE Braided Hoses require Special Fittings.
What is best material for fuel line?
The best fuel line material depends on your needs. However, the best material for fuel lines is polytetrafluoroethylene or PTFE. PTFE fuel line is made of plastic material specifically known as Teflon. This fuel line material is impervious is resistant to the degenerative fuel effects which could form vapor barriers.
How much horsepower will 5/16 fuel line support?
If you're just cruising around with a carbed SBC, you'll probably be fine with a 5/16" line up to about 500 HP because you'll never tax the system enough to starve the motor of fuel.
What size fits for a 5/16 hose?
AN Fittings and Hose Sizes ChartAN SizeHose / Tube O.D.SAE Thread Size-33/16 in.3/8 in.-24-41/4 in.7/16 in.-20-55/16 in.1/2 in.-20-63/8 in.9/16 in.-189 more rows•Feb 25, 2020
Does fuel hose size matter?
Does size really matter when it comes to fuel lines? According to the fuel delivery system experts at Fuelab, it does. It's because fuel line size and length have a direct effect on the amount of fuel pressure drop your fuel system will experience.
What is the ID of 5/16 fuel line?
Universal Fuel Line - 3/16" ID x 5/16" OD, Sold by the FootInside Diameter3/16 InchOutside Diameter5/16 InchTypeFuel Tank Line
How do I know what size fuel hose I need?
1:293:13How To Measure the Diameter Of Any Hose - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo it's 6 over 16 so 6 6 / 16 very very simplest and all that you do is you're taking 6 sixteenthsMoreSo it's 6 over 16 so 6 6 / 16 very very simplest and all that you do is you're taking 6 sixteenths of an inch and divide it by 2 if you can so 6 16 divided by 2 is 3/8.
How do you measure a fuel line hose?
Place the top of a 1/4-inch wrench with an open end over the fuel line. Slide it carefully over the line so that it fits snugly against the tubing. Read the wrench's measurements to determine the diameter of the fuel line. Place a caliper over the fuel line if the wrench did not give an accurate reading.
Product description
Gates Submersible Fuel Line Hose Kit. Kit includes 12" of 5/16" Inner Diameter Submersible Fuel Hose and 2 5/16" Fuel Injection Rated Hose Clamps. Gates Submersible Fuel Line Hose is designed to handle fuel both internally and externally, whereas ordinary fuel line hose is only capable of handling fuel in the inner diameter.
Compare with similar items
There was a problem filtering reviews right now. Please try again later.
Detailed Description
Multi-purpose hose for use on return fuel lines, PCV and EEC systems, and for fuel return hose connections on diesel fuel injection systems. Approved for use with leaded and unleaded gasoline, diesel and gasoline blends of ethanol (E85), methanol and ethers (up to the legal limits allowed by the EPA).
Brand Information
For the past century Gates has been powering progress as one of the worlds leading parts manufacturers in the automotive industry, working with virtually every Original Equipment Manufacturer worldwide to design products for new vehicles as they are being developed.
Detailed Description
Gates Submersible Fuel Line Hose is capable of handling multiple types of gasoline and fuels, including gasoline, alcohol-extended gasoline, ethanols, biodiesel or diesel fuel in fully-immersed, mobile and stationary applications.
Brand Information
For the past century Gates has been powering progress as one of the worlds leading parts manufacturers in the automotive industry, working with virtually every Original Equipment Manufacturer worldwide to design products for new vehicles as they are being developed.
Detailed Description
Installing Barricade protects the system against the aggressive fuel mixtures of today's modern fuels, which can degrade basic rubber hose and result in customer comebacks.
Brand Information
For the past century Gates has been powering progress as one of the worlds leading parts manufacturers in the automotive industry, working with virtually every Original Equipment Manufacturer worldwide to design products for new vehicles as they are being developed.