| Horsepower | Rigid Line Size | -AN Hose Size | Pump GPH at System Pressure | Pump GPH Free Flowing |
| 200 | 5/16" | -04 | 17 | 46 |
| 350 | 3/8" | -06 | 29 | 81 |
| 550 | 1/2" | -08 | 46 | 127 |
| 800 | 5/8" | -10 | 67 | 184 |
| Recommended Fuel Line Size (from the tank to the pump) | ||
|---|---|---|
| Engine Output | Size (inches) | Size (AN) |
| 350 hp or less | 5/16 in. | -5 |
| 350-450 hp | 3/8 in. | -6 |
| 450-650 hp | 1/2 in. | -8 |
How big is a 6an fuel line?
5 rows · 16/09/2017 · Recommended Fuel Line Size (from the tank to the pump) Engine Output: Size (inches) Size (AN) ...
What are the types of fuel lines?
Lots of strange information out on the internet regarding fuel line sizing and it seems like most of the time people run way more diameter fuel line than they need. This is an interesting article that I came across that seems to be pretty relevant. Quick reference for AN to Inch line conversion:-6AN = 3/8"-8AN = 1/2"-10AN = 5/8"-12AN = 3/4"
Will increasing the fuel line size to ½” help?
Tubing is OD (outside diameter) and Pipe is ID (inside diameter). So the easiest way to tell the size of your fuel line, which is tubing, is to use a combination wrench. Whichever one slips over snuggly is the winner….3/8”. Application. For electronic fuel injection systems.
Do you run more fuel line than you need?
06/03/2019 · AN Size Tube or Hose OD ... JYM fuel hose safely handles a wide variety of petroleum based fuels in depot, dispenser, dock, engine fuel line, in-plant transfer, transport and tank truck suction and discharge service. The hoses are compatible with many fuels such as av gas, bio diesel, diesel, gasoline and jet fuel, and are available in a diverse range of pressures, …
Is 3/8 fuel line big enough?
A 3/8”id fuel line can easily support 600 HP given sufficient “pump head”! Given a big enough pump a 3/8” steel line could support 1000 HP. The simple way to know is to install an electronic fuel pressure gauge. If the pressure falls as the engine RPM's go up you need more pump head.16-Nov-2012
What size is fuel line hose?
For fuel injection hose, sizes range from 3/8 inch to 3 ½ inches. Choosing sizes depends on the size of fuel injectors. The common sizes are 5/16, 5/8, 3/8, 1/2, and 3/4 inches.
What is OD of 3/8 fuel line?
5/8 "X 5/8 " Od.
How do I measure fuel line size?
Place the top of a 1/4-inch wrench with an open end over the fuel line. Slide it carefully over the line so that it fits snugly against the tubing. Read the wrench's measurements to determine the diameter of the fuel line.
What is the ID of 5/16 fuel line?
Size: 5/16" I.D. x 9/16" O.D. Working Pressure: 50 P.S.I.
Can fuel line be too big?
Registered. Actually you can have too big a fuel line...if the line is too big and your car accelerates hard yet you don't have a massive fuel pump, you will have the additional weight of the fuel in the line pushing back and fighting the fuel pump which can cause cavitation.26-Jan-2016
What is the OD of 1/4 fuel line?
3/8 InchUniversal Fuel Line - 1/4" ID x 3/8" OD, Sold by the FootInside Diameter1/4 InchOutside Diameter3/8 InchTypeFuel Tank Line19-Nov-2018
What size hose is 10 an?
Russell Performance Technical SupportAN SizeMetal Tube O.D.Thread Size-6 AN3/8"9/16" - 18 SAE-8 AN1/2"3/4" - 16 SAE-10 AN5/8"7/8" - 14 SAE-12 AN3/4"1-1/16" - 12 SAE5 more rows
What size is metal fuel line?
Typically, these 1/4" and 5/16" line sizes are in use for low flow or OEM systems, but are commonly used in high performance applications for pressure gauges as well as plumbing between the Regulator and Intake Manifold.06-May-2015