fuel line fittings

by Miss Aleen Bosco DVM Published 3 years ago Updated 3 years ago

How to measure fuel line fittings?

Tapered Thread

Thread Types: Straight Thread - With straight thread the threads run parallel. ...
AN Standards. High-end racing and performance fuel delivery systems most frequently implement fuel lines and fittings manufactured to AN Standards.
Common Types of Fittings. ...

How to properly seal fuel fittings and fuel lines?

what do I use to seal fuel line npt fittings with?

fumplet. Im workin on a carbed fuel system that Im using an aftermarket electrical can style fuel pump from autozone.
CJ_1080. Use pipe thread sealant from permatex, or regular liquid thread sealant.
KIAMBU. ...
KIAMBU. ...
fumplet. ...
68NovaSS. ...
Overdriv. ...
cobalt327. ...
fumplet. ...
fumplet. ...

More items...

How do you put fitting on steel braided fuel lines?

Tools Required

Bench mounted vice
Imperial spanners that have a polished face (avoid marking the anodised finish)
3 in 1 or similar
A Fine tooth saw such as junior hacksaw
Masking tape
Pliers and snips
Hobby knife
Personal Protective Equipment (gloves and glasses)
Cloth to wipe off excess oil
Vice Jaws. ...

How to disconnect common fuel line fittings?

AADITYA ENGINEERING WORKS
CASA Brands India Private Limited
Arrowtech Motors Private Limited
Hydrokrimp A.C. Private Limited. ...
Mahesh Engineering
Inderjit Engg Works. ...
Jay Kay Technical Services. ...
Milind Enterprises
STI Sanoh India Private Limited. ...
Indomaksson. ...

More items...

What can I use for fuel line fittings?

PTFE Lined Hose is the best soft hose you can use and generally has a braided stainless or braided nylon exterior. The PTFE liner blocks fuel vapors and slows the degradation process. PTFE Braided Hoses require Special Fittings.

Do you need sealant on fuel fittings?

Sealing Fuel Fitting Threads For most components such as a pre-fuel filter (aka fuel water separator) the thread type is typically NPT or NPTF and requires sealant around the threads.

What are the types of fuel line connections?

Top CategoriesHose End Fittings.Hose & Hard Line.AN Unions, Couplers & Reducer Fittings.AN to NPT Adapter Fittings.Fuel Pump & Pressure Regulator Fittings.Tee & Y-Fittings.Hose Barb Fittings & Adapters.Cap & Plug Fittings.More items...

Can you use brass fittings on fuel lines?

It is common to find brass fittings in the air brake systems, cab controls, fuel systems, engine, transmission, cooling and air tanks on a heavy-duty truck and they meet DOT and SAE requirements. Let's take a deeper look into why brass is an ideal material for this market.

Should I use Teflon tape on fuel fittings?

Never use teflon tape. It's a source of problems with fuel flow senders.

Should I use Teflon tape on fuel pump fittings?

Not only should you not do it. Don't do it. If you're not careful, it can get in the fuel line and cause problems with your carb needle/seat and jets. I was always told not to use teflon tape because, of that reason.

What size is standard fuel line?

The sizes typically used in fuel systems are AN6 / Dash 6 / -6, which equates to a thread measuring 9/16” x 18 (threads per inch) with a hose bore around 3/8”, and AN8 / Dash 8 / -8 which has a thread measuring 3/4” x 16 (threads per inch) with a hose bore of around 1/2”.

How do you join a fuel line?

4:327:27Repairing Damaged Fuel Lines with BrakeQuip - Gear Up With Gregg'sYouTubeStart of suggested clipEnd of suggested clipThat's the compression sleeves in the Union itself. You start by sliding the nut onto the tube orMoreThat's the compression sleeves in the Union itself. You start by sliding the nut onto the tube or pipe and then sliding the sleeve on behind it push the Union as far as it will go.

How do I know what size an fittings I have?

As mentioned earlier, you can always identify AN fittings based on the male thread size (outside diameter). These sizes are constant regardless of brand, hose type, or fitting configuration. If your fitting has a convex 37 degree flare at the end, the threads will tell you the AN size (and vice-versa).

Is it OK to use copper tubing for fuel line?

Copper tubing makes an attractive and permanent oil or fuel line and connections. Here are a few hints that might be helpful in working with copper tubing. To begin with, new copper tubing is much easier to work with than old tubing. This is because it is softer.

Can you use plastic fittings for fuel?

In terms of safety, plastic has a larger space between chemicals than rubber, so when a gas with small molecules such as liquefied petroleum gas is transported in a plastic hose, the gas molecules may penetrate through the hose. Such a leak is dangerous, and so plastic hoses may not be used for fuel gas.

Can nylon fittings be used with gasoline?

NYLON FITTINGS Nylon is resistant to a broad range of chemicals including most agricultural chemicals, ammonium compounds, detergents, diesel fuel, ethanol, gasoline, hexane, magnesium sulphate, most sodium compounds, trichloroethylene, and zinc sulphate.

Russell Performance 644123 - Russell Push-On EFI Fittings

Fitting, Push-On EFI Adapter, Straight, Male -6 AN, Female Quick-Connect 3/8 in., Black Anodized, Each

Russell Performance 644113 - Russell Push-On EFI Fittings

Fitting, Push-On EFI, Straight, Male -6 AN, Female Quick-Connect, Threaded Cap, 5/16 in., Black Anodized, Each

Earl's Performance 751166ERL - Earl's Performance Vapor Guard OEM Quick-Connect Fuel Rail Adapter Fittings

Fuel Line Adapter Fitting, 3/8 in. Female Quick-Connect, To -6 AN Male AN, Straight, Aluminum, Black Anodized, Each

Earl's Performance 751156ERL - Earl's Performance Vapor Guard OEM Quick-Connect Fuel Rail Adapter Fittings

Fuel Line Adapter Fitting, 5/16 in. Female Quick-Connect, To -6 AN Male AN, Straight, Aluminum, Black Anodized, Each

Russell Performance 644133 - Russell Push-On EFI Fittings

Fitting, Push-On EFI, Straight, Male -8 AN, Female Quick-Connect, Threaded Cap, 3/8 in., Black Anodized, Each

ICT Billet AN808-02B - ICT Billet Fuel Rail Adapter Fittings

Fitting, Fuel Line Adapter, Straight, Black Anodized, 3/8 in. Female Quick-connect, -6 AN Male Threads, Each

ICT Billet AN809-02B - ICT Billet Fuel Rail Adapter Fittings

Fitting, Fuel Line Adapter, Straight, Black Anodized, 3/8 in. Female Quick-connect, -6 AN Male Threads, Each

The Benefits of Buying Fittings And Hose Connectors

Purchasing performance fuel injection lines and fittings as well as hose for your car, truck, or SUV provides a lot of benefits. These include a safe and secure connection to provide years of leak-free service for your vehicle. On the track, racing lines help protect the driver in the event of an accident by being made stronger.

Customer Questions About Fittings & Hose Connectors

Buying quality fittings and hose can be overwhelming and confusing. There are many different factors to consider when shopping fittings and hose connectors including different brands, prices, warranties, performance capabilities, and much more. If the vehicle will be on the track, race line is preferred, and may even be required.

Can't Find The Fittings And Hose You Are Looking For?

A JEGS expert is ready to answer your questions and help you find the fittings and hose that you require for your specific application.

What are the different types of fittings used in racing?

The fittings we will discuss are Adapter Fittings (also called Standard, or Union), Port Fittings, and Pipe Fittings, as well as thread types and size standards associated with each.

What is the standard for port fittings?

Port Fittings conform to AN standards - typically per Military Standard MS33649. The cone end uses Straight Thread and a 37° cone. The male port end of the fitting uses Straight Thread, and is received by a female port of corresponding size and thread pitch. Port Fittings require use of O-rings.

Can mismatched lines come apart?

Mismatched lines can come apart under pressure. Verify that inner diameters match! Common Types of Fittings. Adapter Fittings Adapter Fittings – also known as Standard Fittings or Union Fittings – are commonly used to connect fuel line tubes and hoses to fuel pumps, fuel regulators, and fuel filters.

Do pipe fittings need O rings?

Threads must be clean and precise, to make up for gaps between threads that allow for leakage. Pipe Fittings, which use Tapered Thread, don’t use O-rings, but rather must use compounds or Teflon Tape to help seal the threads.

The Benefits of Buying Hard Fuel Line Fittings & Connectors

There are many benefits to buying hard line fittings & connectors. When properly matched, the result will be a leak free connection and plumbing for your vehicle. It is important to understand hard fuel line fittings & connectors and their functions to make this possible.

Customer Questions About Hard Fuel Line Fittings & Connectors

Buying quality automotive hard fuel line connectors and fittings can be overwhelming and confusing. There are many different factors to consider when shopping for hard fuel line fittings & connectors including different brands, prices, warranties, performance capabilities, and much more.

Can't Find The Hard Fuel Line Fittings & Connectors You Are Looking For?

A JEGS expert is ready to answer your questions and help you find the hard fuel line fittings & connectors that you require for your specific application.

Product Description

Straight barbed fittings which complete the installation of either our fuel pressure regulator or our electric fuel pump. Uses 1/4 inches lineBarbed Fuel Line Fittings for 1/4 Line 1/8 NPT Pair