There are EV1 Injectors with Jetronic or USCAR connectors. The older EV1 fuel injectors usually have Jetronic / Minitimer connectors. There are EV6 and EV14 Bosch fuel injectors with the “older style” Jetronic / Minitimer or with the “newer style” USCAR connectors.
Full Answer
What is a fuel line connector on a car?
The fuel line connector attaches the flexible fuel lines to the fuel pump, fuel filter, and other related fuel system components. Most are designed with quick-connect fittings and can be removed by pressing the retaining tabs. Over time, the connectors can fail, causing fuel to leak.
How many 800-084 fuel line connectors are left in stock?
Only 14 left in stock (more on the way). . . . . Dorman 800-084 Fuel Line Quick Connector for 5/16 In. Steel to 3/8 In.
Does AutoZone replace fuel line connectors?
Shop for your specific vehicle to find parts that fit. Shop at AutoZone for direct-replacement Fuel Line Connectors. Rather than replacing the entire fuel line for a fuel line repair, only fix the part that is damaged.
What are the different types of fuel injector connectors?
Bosch Currently manufactures new EV6 and new EV14 fuel injectors with many different injector connector / plug types including: Jetronic / Minitimer (rectangle shaped), USCAR (rounded edged square shaped), and OEM manufacturer specific (Denso, Sumitomo, Delphi, and Honda). Manufacturer Specific Fuel Injector Connector Types:
What are the types of fuel line connections?
Top CategoriesHose End Fittings.Hose & Hard Line.AN Unions, Couplers & Reducer Fittings.AN to NPT Adapter Fittings.Fuel Pump & Pressure Regulator Fittings.Tee & Y-Fittings.Hose Barb Fittings & Adapters.Cap & Plug Fittings.More items...
What can I use for fuel line fittings?
PTFE Lined Hose is the best soft hose you can use and generally has a braided stainless or braided nylon exterior. The PTFE liner blocks fuel vapors and slows the degradation process. PTFE Braided Hoses require Special Fittings.
How does a fuel line quick connect work?
2:0912:37How to Disconnect Common Quick Connect Fittings - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo that's how this is a quick-connect. So when you push the line at that side at an angle. It willMoreSo that's how this is a quick-connect. So when you push the line at that side at an angle. It will push that yellow piece out of the way and as soon as the line gets past it it'll back into place.
How do you connect fuel lines?
2:395:32Fuel Line Connection - YouTubeYouTubeStart of suggested clipEnd of suggested clipYou have a 3/8 inch inner diameter fuel hose you'll need to use part number two 6-2 nine there areMoreYou have a 3/8 inch inner diameter fuel hose you'll need to use part number two 6-2 nine there are also options for connecting a n style fittings to a single feed carburetor.
Can I use Teflon tape on fuel fittings?
Never use teflon tape. It's a source of problems with fuel flow senders.
Can you use brass fittings for gasoline?
It is common to find brass fittings in the air brake systems, cab controls, fuel systems, engine, transmission, cooling and air tanks on a heavy-duty truck and they meet DOT and SAE requirements. Let's take a deeper look into why brass is an ideal material for this market.
How do I install quick connect fuel fittings?
1:352:24Installing Quick Connects Into OE Line - YouTubeYouTubeStart of suggested clipEnd of suggested clipWhatever. But there you go no clamps in fact if you put clamps on it it's probably going to leak. SoMoreWhatever. But there you go no clamps in fact if you put clamps on it it's probably going to leak. So all you need to do is just push it right in and you're all good to go.
How do fuel line quick disconnects work?
0:214:21How to Disconnect Common Fuel Line Fittings - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd location the push on the other side. So we're going to push this from both directions to releaseMoreAnd location the push on the other side. So we're going to push this from both directions to release it from the use. This type of push connector only pushes from one side as you can see the location.
How do you fix a leaking fuel line connector?
0:0410:40How To Fix Leaking Fuel Lines | ALL Makes And Models - YouTubeYouTubeStart of suggested clipEnd of suggested clipWe have four compression fittings we have a tubing cutter. We have a pick or you can use aMoreWe have four compression fittings we have a tubing cutter. We have a pick or you can use a screwdriver whatever the case we're gonna be using a little hacksaw for metal.
How do you install fuel line clips?
1:162:52Trimmer Repair - Replacing the Fuel Line Clip (Echo Part # 13201309820)YouTubeStart of suggested clipEnd of suggested clipLet's grab the fuel line and then fish it out of the tank. Now just pull the fuel filter from theMoreLet's grab the fuel line and then fish it out of the tank. Now just pull the fuel filter from the fuel. Line. And remove the ring clamp. Now slide our new ring clamp over the fuel line.
Can I use rubber hose to repair fuel lines?
Standard rubber vacuum or heater hose should never be used in fuel applications. The hose will deteriorate from the inside out and can plug fuel filters and carburetors with rubber debris, long before it springs an external leak.
Which fuel line is the return line?
The vapor-return line normally runs from the fuel pump or the fuel filter to the fuel tank. This vapor-return line is connected to a special outlet in the fuel pump. Any vapor that forms in the fuel pump returns to the fuel tank through this line.
What are the different types of fittings used in racing?
The fittings we will discuss are Adapter Fittings (also called Standard, or Union), Port Fittings, and Pipe Fittings, as well as thread types and size standards associated with each.
What is the standard for port fittings?
Port Fittings conform to AN standards - typically per Military Standard MS33649. The cone end uses Straight Thread and a 37° cone. The male port end of the fitting uses Straight Thread, and is received by a female port of corresponding size and thread pitch. Port Fittings require use of O-rings.
Do pipe fittings need O rings?
Threads must be clean and precise, to make up for gaps between threads that allow for leakage. Pipe Fittings, which use Tapered Thread, don’t use O-rings, but rather must use compounds or Teflon Tape to help seal the threads.
What is a male connector?
Male connectors mimic a fuel injector. Male connectors are generally used to make custom fuel injector adapters to enable you to convert to a different plug style fuel injector using your existing wiring harness.
What is a female fuel injector?
Female Connectors are what exist on your wiring harness, and plug directly onto the fuel injector. If you have broken a connector while servicing your fuel injectors, you will need to replace it with the correct female connector. Male Fuel Injector Connectors / Plugs attach to the existing female connectors on your wiring harness.
What is an EV1 injector?
EV1, EV6, and EV14 are Boschs’ company designations for fuel injector body styles, and are not related to the connector type on the fuel injector!!!! There are EV1 Injectors with Jetronic or USCAR connectors. The older EV1 fuel injectors usually have Jetronic / Minitimer connectors.